09-18-2013, 05:31 PM | #1 |
Drives: 2010 camaro 2ss Join Date: Jan 2012
Location: houston tx
Posts: 239
|
Tick performance remote bleeder?
Anybody have pics of the bleeder installed in their 2010 camaro ss?
|
09-18-2013, 06:22 PM | #2 |
2010 Camaro 2 SS/RS M6
Drives: 2010 Camaro SS/RS Join Date: May 2009
Location: Clayton Delaware
Posts: 1,218
|
here it is from the inside of the bellhousing.
__________________
Forged LS3, FED M311 heads, CAI Inc, ARH 1 7/8, Corsa Xtreme, Taylor Wires, MGW Shifter, Street slayer twin carbon clutch, Tick braided clutch line & speed bleeder, ZL1 Diff Swap, BMR Split drop, Sway Bars, Trailing Arms, Toe Rods, Pro bushing kit, Carslyle racing 15in conversion, Whipple, LPE dual fuel pumps, Rx catch can, Id1300x, Alky Control
|
09-18-2013, 06:50 PM | #3 |
Drives: 2010 camaro 2ss Join Date: Jan 2012
Location: houston tx
Posts: 239
|
Thx a lot , that's part of what I was looking for.
The second part is...where does it end? Is it zip tied somewhere by the engine bay? |
09-19-2013, 03:03 PM | #4 |
2010 Camaro 2 SS/RS M6
Drives: 2010 Camaro SS/RS Join Date: May 2009
Location: Clayton Delaware
Posts: 1,218
|
I have mine zip tied up above my brake fluid reservoir.
__________________
Forged LS3, FED M311 heads, CAI Inc, ARH 1 7/8, Corsa Xtreme, Taylor Wires, MGW Shifter, Street slayer twin carbon clutch, Tick braided clutch line & speed bleeder, ZL1 Diff Swap, BMR Split drop, Sway Bars, Trailing Arms, Toe Rods, Pro bushing kit, Carslyle racing 15in conversion, Whipple, LPE dual fuel pumps, Rx catch can, Id1300x, Alky Control
|
|
|
|
|