06-02-2010, 08:16 PM | #1 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
Lowered my SS Today
Before
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:17 PM | #2 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
After
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:17 PM | #3 |
Drives: 2010 CGM 1SS Camaro Join Date: Oct 2009
Location: The Woodlands, TX
Posts: 527
|
After? ...
Nevermind there it is!!! Looking good!!
__________________
|
06-02-2010, 08:17 PM | #4 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
Before
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:18 PM | #5 |
|
did it change the ride comfort? is it stiffer?
__________________
2013 ZL1 BONE STOCK! LOL
|
06-02-2010, 08:20 PM | #6 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
This Site is to fast for me I guess I will post all the Before shots 1st and then the after shots 2nd
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:22 PM | #7 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
After......
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:23 PM | #8 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
niiice. did you have a shop do it? I'm debating weather or not to do it myself depending on how much these places are charging to do it..
__________________
2G1FS1EWXD9163847 |
06-02-2010, 08:24 PM | #9 |
|
Locking A1 man i have to ask you guys this i am on the fence to install a set of 20x8.5 and 20x10 matte blk DONINGTON from TSW AND WANDER if there is someone that already did or seen this ones on the camaro and if there is some issues that i should be awere of . thank you for the info ESS
|
06-02-2010, 08:25 PM | #10 |
Drives: 2013 Hot Wheels Special Edition Join Date: May 2009
Location: Auburn,Mass
Posts: 1,333
|
Looks good, I love that look of a lowered car
|
06-02-2010, 08:25 PM | #11 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
Did run into one problem ...The Foose legend 22`s has 2 Valve stems ..The valve stem on the back side of the wheel would hit the E Brake Cable making a Ticking sound ......I fixed it with some wire ties for now but will have to come up with a better solution ....Only put on about 30 miles since Install but everything seams A Ok
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:28 PM | #12 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
Yes i had a shop do it ....it was the owner of the shop that ended up doing the work so he was answering phone calls and what not so its hard for me to say how long it took but I am guessing with the install and alignment 4 maybe 5 Hours...Can`t tell you how much he charged me cause i left without paying
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
06-02-2010, 08:55 PM | #13 |
WrkrBee
|
Can you give any details if its easy enuff to do it yourself or recommend only a shop? The Vettes are easy, couple nuts and bolts moving and Presto!
__________________
2016 Hyper Blue w/ Pearl White Rally Stripes, Black Interior 2LT/RS V6 A8,
Lights, Memory & Convenience Options Sunroof 2011 2 LT/RS Victory Red V6 M6 |
06-02-2010, 08:59 PM | #14 |
Drives: 69 Pontiac Firebird Join Date: Mar 2009
Location: South Eastern Minn
Posts: 374
|
Looked easy enough to me ......Couple of times I had to help him put bolts in while he lined things up....I did not watch them put the new Springs into the Struts so I can`t help you there.....I know you can do it on Jack Stands but a lift would be the best for sure
__________________
1100, Ordered car May 22nd 09
2000, Order accepted by GM - 26 May 2009 3000, Order accepted by production control 5/27 3300, Order scheduled for production 3400, Order broadcast 3800, Order produced..2G1FT1EW4A9125913 Delivered to me July 28th |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SS bumper cover installed on my 2LT/RS | 01pewterz28 | Cosmetics and Lighting Modification Discussions | 60 | 01-15-2015 03:57 PM |
Anyone with an HHR SS or Implala SS | caverman | 5th Gen Camaro SS LS LT General Discussions | 1 | 02-06-2010 05:45 AM |
Anyone see the SS on Motor Week today? | MotorCityAgent | 5th Gen Camaro SS LS LT General Discussions | 5 | 10-12-2009 06:09 AM |
lowered a members SS :) | RonnieSVT | Camaro Photoshops / Renderings Forum | 2 | 06-19-2009 12:56 PM |