|
View Poll Results: T Tops or Carbon Fiber? | |||
T Tops | 14 | 73.68% | |
Carbon Fiber Conversion (Fenders, doors, etc) | 5 | 26.32% | |
Voters: 19. You may not vote on this poll |
|
Thread Tools |
10-18-2012, 10:42 PM | #785 |
Just Because!
Drives: 2010 SIM 2SSRS Join Date: Jun 2010
Location: San Jose, Ca
Posts: 6,909
|
Josh, you still have your oil cooler somewhere? Or did you get rid of it already? I'd really like to get one soon.
__________________
|
10-24-2012, 09:58 PM | #786 | |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Quote:
Right now, the battery needs to be replaced; possibly the starter too. After that, I gotta take a look at the fuel system....POS.....i hope its something easy to fix, otherwise Aeromotive will be getting one nasty phone call..... Got some parts in for a remote battery shutoff earlier this week, I'll be installing it in a couple weeks. This tuning bullshit is really bothering me, never properly got tuned since the motor went back in June and constantly running into issues. It's been a year since i got the turbos installed, and I'm only make 70 more hp than i did with the supercharger. Gotta get everything figured out with the car before more gets added...
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
10-24-2012, 10:02 PM | #787 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
On a side note, a got a message from an editor at Discovery Channel that wants to do a full writeup article on my car! Some of you might remember the little blip on the website about a month ago, well they are going to correct it and do a new writeup!
Also took a ride in a Radical SR3 over the weekend. I really want one, and best is the price, it's only ~$40k for a used one, which isn't nearly as bad as I was expecting. This will probably come after the Fisker the girlfriend wants lol.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
10-24-2012, 10:24 PM | #788 |
|
What's a RS3? Fisker lol...chrome like Bieber lol
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
10-24-2012, 11:04 PM | #789 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
one of these, never seen one in person until this weekend, the owner was nice enough to give me a ride in one. It hit 140mph on a banked sweeper, and we hit over 3Gs of force. It was an amazing feeling! Pretty much a mini indy car. It comes standard with a 1500cc busa engine (revs to 13k rpms!), and they make a 650hp v8 version. The body only weighs 1100lbs, so you can imagination how fast they move.
I'm seriously looking at the blue fisker, otherwise, I might wait for the fisker sunset to come out, a hardtop coupe, similar to the current maserati. Sunset
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
10-24-2012, 11:19 PM | #790 |
|
That would be sweet. Just another car you would have to tow around lol. Fisker isn't my cup of tea but if you like it that's all that matters.
You looking for a job?
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
10-24-2012, 11:24 PM | #791 | |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Quote:
I've been looking for a permanent job since May, but got a temp 6 week job that ends this Friday. I got an offer with a online gaming company; nice pay (step up from Genentech) and I get to travel to Seattle every other month, with a trip to Ireland twice a year. I've had 3 interviews with Facebook, and even filled out a background check, they are pretty serious about hiring me, but it would be a strict schedule compared to the gaming company, which I would have an EXTREMELY flexible schedule (start at 10am, leave at 4pm, and telecommute if i feel like it!)
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
10-24-2012, 11:27 PM | #792 |
|
Work should be pretty easy to find by you. Good luck with getting a permanent gig. My wife's company hires all the time, her main office is in Campbell. She works for realtor.com, good money and all programmers, developers etc.
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
10-24-2012, 11:31 PM | #793 | |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Quote:
I wasn't getting any hits for jobs I was applying for, I recently revamped my resume, and I've been getting quite a few calls a day with companies wanting to interview me. My ideal job would be for Lockheed, NASA, or Boeing; now that would be an awesome job lol! The nice thing about the gaming company is they would work with me on scheduling because I'm taking night classes at a college right now.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
10-24-2012, 11:36 PM | #794 | |
|
Quote:
__________________
My Build Thread
http://camaro5.com/forums/showthread...=1#post5036900 Maureen@Rodgers Chevrolet...The best prices and customer service period!!(734)676-9600 Gen5Diy.com.....http://www.gen5diy.com/ Wretched Motorsports..www.wretchedms.com/ Pedders USA...http://www.peddersusa.com/ |
|
10-25-2012, 01:05 AM | #795 | |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Quote:
I posted on dice, but didn't get any calls for jobs i was interested in...
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
10-29-2012, 11:52 AM | #796 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Well got a new name for the car lol, I was at my girlfriend's dad's house a couple weekends ago for a ratrod show (which was awesome, cuz i saw a 440ci twin turbo 37 coupe!) Anyways, so someone decided to bring some fireworks, one of them happening to be 'The Neighbor Hater'. Here's a video of it lol
So we set off a couple, most of them hitting the power lines on the way down! And everyone in my court is retired (3 have died in the last couple months) and everyone has dinner at 3pm and lights out at 7 lol. For those of you that have heard my car, can guess what my neighbors think, for those of you that havent, i have headers, turbos, and uhhhhh thats it! I usually roll in around 11 or 12, and sometimes later, waking up everyone on the street. I've even got notes on my car with complaints! So naturally, makes sense that my car be deemed......the neighbor haterrrr! No new updates on the car, she's still sitting waiting to be driven again. Good news is gas is ~$4/gallon, so went down about 80cents in the last week!!! Going to take the battery out, im thinking its just on its last leg. If that doesn't solve the problem then gotta replace the starter. I start my new job at Facebook in a week when I come back from SEMA, so should be able to start spending some money on the monster again!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
11-14-2012, 03:14 PM | #797 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Looks like someone created my car as a download for GTA IV! Impressive job, all the angles and decals are spot on!
Website: http://www.gtagaming.com/downloads/g...isc-mods/17296
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
11-16-2012, 02:58 PM | #798 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
A photoset of my carbon fiber twin plenum intake manifold; true car porn!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
|
Tags |
carbon fiber intake, goldrush rally 4, the neighbor hater, tron camaro, twin turbo |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
3rd Gen Camaro Street Stock build thread (dialup beware) | zlathim | 3rd Generation Camaros | 9 | 12-06-2018 10:30 AM |
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] | GTAHVIT | Member Car Journals | 5217 | 06-27-2016 08:14 AM |
Do you want the Z28? | ChrisB | Camaro ZL1 Forum - ZL1 Specific Topics | 1616 | 09-04-2010 11:49 PM |
Anyone in St. Louis want a black SS March build Camaro | Sean_W | Camaro Price | Ordering | Tracking | Dealers Discussions | 11 | 03-08-2009 01:31 PM |