Weathershield Car Cover - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nvydvr · 10-31-2015, 07:20 PM

I have a Weathershield HP car cover cover I originally bought for my Ashen Gray '15 1LE. The cover fit perfect, but it always left surface scratches on all the high points, ridges... Etc. you get the point. The scratching was very light and easily removed with a little wax, but it wasn't worth the hassle of using the cover and I haven't used it on the new ZL1. Has anyone else had these issues and/or is there a cover you would recommend. I paid over $300 for the cover and carrying bag, but if someone's interested in it I'd let it go for a steal... Just PM me if you want to.

ZMEnow · 10-31-2015, 10:46 PM

Coverking it's sold under a GM part number with Zl1 logos in the stitching. It stays on my car all the time, butter soft, spandex, and washes in washer and dryer. Any car cover will scratch if you are not careful when removing making sure there is nothing on the top side of the cover when you remove. If not you will just roll it to the underside of the cover, now you have to inspect the cover before you put it back on or what ever is underneath will scratch the paint.

Only thing worse is to wash it while it has the contamination underneath, because if you place it in the dryer those small particles become hard and brittle and now you have serious issues until you pick each contaminant off from the inside.

If mine has a bunch of stuff on it after Leaving the garage door open on a windy day i just blow off the cover with leaf blower before removing.

10-31-2015, 07:20 PM	#1
nvydvr Drives: 2015 Red Rock ZL1 Join Date: Dec 2014 Location: Panama City Beach, Florida Posts: 1,097	Weathershield Car Cover I have a Weathershield HP car cover cover I originally bought for my Ashen Gray '15 1LE. The cover fit perfect, but it always left surface scratches on all the high points, ridges... Etc. you get the point. The scratching was very light and easily removed with a little wax, but it wasn't worth the hassle of using the cover and I haven't used it on the new ZL1. Has anyone else had these issues and/or is there a cover you would recommend. I paid over $300 for the cover and carrying bag, but if someone's interested in it I'd let it go for a steal... Just PM me if you want to. __________________ Alex 2015 Red Rock ZL1 Panama City Beach, FL

10-31-2015, 10:46 PM	#2
ZMEnow Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013 Location: Michigan Posts: 1,607	Coverking it's sold under a GM part number with Zl1 logos in the stitching. It stays on my car all the time, butter soft, spandex, and washes in washer and dryer. Any car cover will scratch if you are not careful when removing making sure there is nothing on the top side of the cover when you remove. If not you will just roll it to the underside of the cover, now you have to inspect the cover before you put it back on or what ever is underneath will scratch the paint. Only thing worse is to wash it while it has the contamination underneath, because if you place it in the dryer those small particles become hard and brittle and now you have serious issues until you pick each contaminant off from the inside. If mine has a bunch of stuff on it after Leaving the garage door open on a windy day i just blow off the cover with leaf blower before removing.