03-21-2015, 10:18 PM | #1 |
Drives: 2010 SS RS Join Date: Jan 2015
Location: AZ
Posts: 406
|
dynosteve rdpmotorsport.com A+++++ nightfury cam
I order an sct x4 tuner and innovate lc2 wideband from Steve (dynosteve) and gave him a pretty big challenge. I added longtube and a vararam and had him build a tune for that. Did some data logging and it all came out ok.
Now the hard part, I wanted to add a nightfury cam and asked if he could tune that. For those that don't know he is in northern ohio and I am in southern arizona. I did some data logs and sent them to him. He made a tune and sent it to me. I uploaded it, re data logged and sent him the log. He fine tuned it and sent me the new tune. One last log determined it was spot on. Got it on a mustang dyno today. The shop cut the Ron short at 5700 rpm on the chart and let of the gas gas at 6000 rpm because they were scared the big cam would be risky to push to redline. 438 hp and 409 tq at 5700 rpm. At 6000 rpm my friend said it hit 460 hp and the chart shows it was still climbing. The air fuel ratio was 11.8 Which is spot on what dynosteve tuned it to because he didn't want to run too lean on a remote tune. I'm trying to upload the picture of the dyno chart now. |
03-21-2015, 10:38 PM | #2 |
Drives: 2010 SS RS Join Date: Jan 2015
Location: AZ
Posts: 406
|
Dyno chart upload attempt.
|
03-22-2015, 10:45 AM | #3 |
Drives: 2010 SS RS Join Date: Jan 2015
Location: AZ
Posts: 406
|
Dyno chart.
|
|
|
Thread Tools | |
|
|