PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS! - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rob@WretchedMS · 02-28-2011, 09:50 PM

yes, yes it is.

JusticePete · 03-07-2011, 10:18 PM

600hp-lpe would you like to run less rubber up front in your next autocross or are you happy with your 315/30/18s square setup?

Rob@WretchedMS · 03-08-2011, 01:08 PM

I'm thinking that i'd stay with the 315's!

600hp-lpe · 03-08-2011, 02:32 PM

Quote:

Originally Posted by JusticePete

600hp-lpe would you like to run less rubber up front in your next autocross or are you happy with your 315/30/18s square setup?

I am always open to suggestions.. What do you have in mind?

It's not exactly square..
315/30/18 is the front tire.. the rear is a 335/30/18... Hoosier R6 tires.

I just scrubbed them in at the end of last year.. I was still pushing a little. You suggested I back off from full hard to the soft setting on the front swaybar.. I havn't had a chance to try that yet...

Talk to me. I'm listening...

Iansane · 03-08-2011, 03:00 PM

What are your hot tire pressures and temperatures?

600hp-lpe · 03-08-2011, 03:12 PM

Quote:

Originally Posted by Iansane

What are your hot tire pressures and temperatures?

I ran 28 lbs front, 31 lbs rear.

I don't have a pyrometer for temp. (yet).

Iansane · 03-08-2011, 03:37 PM

Was that right after the run?

600hp-lpe · 03-08-2011, 04:38 PM

Quote:

Originally Posted by Iansane

Was that right after the run?

Measured before each run.

Front tires creep up by 3 lbs. after the 1st run of the day
Rears increase by 3.5 lbs. after 1st run.

It's less each time after 2nd, 3rd,4th runs.

I check them after each run and bleed them back down to where I want to run them. after 5 runs or more, they are warmed up and maintain a constant pressure.

JusticePete · 03-08-2011, 04:40 PM

Quote:

Originally Posted by 600hp-lpe

I am always open to suggestions.. What do you have in mind?

It's not exactly square..
315/30/18 is the front tire.. the rear is a 335/30/18... Hoosier R6 tires.

I just scrubbed them in at the end of last year.. I was still pushing a little. You suggested I back off from full hard to the soft setting on the front swaybar.. I havn't had a chance to try that yet...

Talk to me. I'm listening...

I was joking becuase some seem to think you can't fit rubber that large up front. I think you're setup for your power is just about dead nuts perfect.

600hp-lpe · 03-08-2011, 04:44 PM

Quote:

Originally Posted by JusticePete

I was joking becuase some seem to think you can't fit rubber that large up front. I think you're setup for your power is just about dead nuts perfect.

I know I hit 68-70 mph around a 200' skid pad at a test and tune day, before I slid the WHOLE car sideways...

That sure was fun! Too bad I don't have video of that!

JusticePete · 06-03-2011, 10:23 AM

Bump for the new members of Camaro5.

VRCamaroSS · 06-03-2011, 05:50 PM

Do you have to have those specific forgeline wheels to have your special offset? 10.5 up front does sound pretty bad ass.

JusticePete · 06-03-2011, 06:00 PM

Quote:

Originally Posted by VRCamaroSS

Do you have to have those specific forgeline wheels to have your special offset? 10.5 up front does sound pretty bad ass.

The offset is the key. Dave, the owner of Forgeline, did custom fit the wheels. You can contact Dave by sending a PM to Forgeline from this forum. Forgeline makes some of the lightest strongest wheels available. I trust my life to Forgeline and Bridgestone.

VRCamaroSS · 06-03-2011, 07:11 PM

Quote:

Originally Posted by JusticePete

The offset is the key. Dave, the owner of Forgeline, did custom fit the wheels. You can contact Dave by sending a PM to Forgeline from this forum. Forgeline makes some of the lightest strongest wheels available. I trust my life to Forgeline and Bridgestone.

I just did. I do like the wheels you have and on there website I could get them gunmetal with a polished lip. Something about having 10.5 all around sounds better then having 22's.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
Pedders December Dollar Days for the 2010 Camaro and Brand X Vehicles	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	85	07-26-2009 05:20 PM
SEMA, Pedders Conference, GS Camaro, New Products	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	25	12-01-2008 01:25 PM
JP Got Bored or Maybe Lost His Mind	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	0	11-26-2008 04:18 PM
Pedders partnering with GM Racing on Camaro suspension	Info@PeddersUSA.com	Wheels and Tires Talk Sponsored by The Tire Rack	6	09-30-2008 12:14 PM

02-28-2011, 09:50 PM	#197
Rob@WretchedMS Drives: His Wife Crazy Join Date: Jan 2008 Location: Silas Deane Auto,CT Name: Rob Anderson Posts: 1,789	yes, yes it is.

03-07-2011, 10:18 PM	#198
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	600hp-lpe would you like to run less rubber up front in your next autocross or are you happy with your 315/30/18s square setup?

03-08-2011, 01:08 PM	#199
Rob@WretchedMS Drives: His Wife Crazy Join Date: Jan 2008 Location: Silas Deane Auto,CT Name: Rob Anderson Posts: 1,789	I'm thinking that i'd stay with the 315's!

03-08-2011, 03:00 PM	#201
Iansane Drives: 325is Join Date: Oct 2009 Location: Lansing Posts: 50	What are your hot tire pressures and temperatures?

03-08-2011, 03:37 PM	#203
Iansane Drives: 325is Join Date: Oct 2009 Location: Lansing Posts: 50	Was that right after the run?

06-03-2011, 10:23 AM	#207
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Bump for the new members of Camaro5.

06-03-2011, 05:50 PM	#208
VRCamaroSS Drives: '10 Camaro 2SS/RS Join Date: May 2011 Location: MN Posts: 70	Do you have to have those specific forgeline wheels to have your special offset? 10.5 up front does sound pretty bad ass.