wideband data logging and sct - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Stealth 2010 2SS/RS · 07-20-2013, 08:04 PM

ok so I finally get my wideband bung welded in and just trying to make sure everything is working. I have an aem inline wideband uego controller, all other pids log just fine but the wide band just sits at 7.3 volts this can't be right and I'm almost positive I have it wired up right, white wire from wideband to yellow/orange. I have all the up to date sct drivers firmware, and using live links gen 2. I've put the equation in live links as (2.375*v)+7.3125. Any help or ideas would be greatly appreciated. Just trying to get everything set up to log for Ted.

Supercharged SS · 07-20-2013, 08:07 PM

Quote:

Originally Posted by Stealth 2010 2SS/RS

ok so I finally get my wideband bung welded in and just trying to make sure everything is working. I have an aem inline wideband uego controller, all other pids log just fine but the wide band just sits at 7.3 volts this can't be right and I'm almost positive I have it wired up right, white wire from wideband to yellow/orange. I have all the up to date act drivers firmware, and using live links gen 2. I've put the equation in live links as (2.375*v)+7.3125. Any help or ideas would be greatly appreciated. Just trying to get everything set up to log for Ted.

Pm nyny69. He just did his up. He claims it works perfectly. But he also thinks his car is fast at 10.9!!

nyny69 · 07-20-2013, 08:58 PM

Quote:

Originally Posted by Supercharged SS

Pm nyny69. He just did his up. He claims it works perfectly. But he also thinks his car is fast at 10.9!!

Remember 40k for 1.1...... No thanks

nyny69 · 07-20-2013, 09:03 PM

Quote:

Originally Posted by Stealth 2010 2SS/RS

ok so I finally get my wideband bung welded in and just trying to make sure everything is working. I have an aem inline wideband uego controller, all other pids log just fine but the wide band just sits at 7.3 volts this can't be right and I'm almost positive I have it wired up right, white wire from wideband to yellow/orange. I have all the up to date act drivers firmware, and using live links gen 2. I've put the equation in live links as (2.375*v)+7.3125. Any help or ideas would be greatly appreciated. Just trying to get everything set up to log for Ted.

what firewire are you using. They can come in 2 different configurations. I metered mine out to figure which one I had. I'd suggest adding analog 2 to your pid list just in case yours is wired opposite. Mine will default to a voltage reading if I log without hooking it up. This seems like your problem

Stealth 2010 2SS/RS · 07-20-2013, 09:09 PM

I'll have to give it a try in the morning. Your suggesting to wire the other analog together?

nyny69 · 07-20-2013, 09:16 PM

Quote:

Originally Posted by Stealth 2010 2SS/RS

I'll have to give it a try in the morning. Your suggesting to wire the other analog together?

No. I'm just saying when setting up config file select both analog 1 & 2 . If you had the other firewire that uses the other configuration you wired up analog 2 instead of 1. If livelink doesn't see any readings from the analog it defaults to a solid reading.

nyny69 · 07-20-2013, 09:21 PM

Here is a link for the 2 different schemes.

http://www.tricktuners.com/forums/showthread.php?t=194

Stealth 2010 2SS/RS · 07-20-2013, 09:29 PM

ok, thanks for the info.

Stealth 2010 2SS/RS · 07-21-2013, 05:34 PM

nyny69 thanks for the help I found that my firewire cable didn't mach the two variations but found which wire are what and got it all working. Thanks.

07-20-2013, 08:04 PM	#1
Stealth 2010 2SS/RS Drives: Black 2SS/RS M6 Join Date: Mar 2010 Location: Minnesota, Vadnais Heights Posts: 494 View My Garage	wideband data logging and sct ok so I finally get my wideband bung welded in and just trying to make sure everything is working. I have an aem inline wideband uego controller, all other pids log just fine but the wide band just sits at 7.3 volts this can't be right and I'm almost positive I have it wired up right, white wire from wideband to yellow/orange. I have all the up to date sct drivers firmware, and using live links gen 2. I've put the equation in live links as (2.375v)+7.3125. Any help or ideas would be greatly appreciated. Just trying to get everything set up to log for Ted. __________________ 2010 LS3 2SS/RS M6 AirAid Cold Air Intake, AAC LED sidemarkers, AAC P13w plasmas drl, Kook's Custom 1-7/8" Headers, Corsa Hybrid Exhaust JRE 445 Cam Package, JRE SCT Tune, RX Catch Can and Breather Tech AFX Heater Hose Relocation Kit, Black Chrome Wheels Pfadt trailing and toe arms, Pfadt solid subframe mounts, Pfadt diff bushings, Street Slayer Twin Carbon Technostalgia Camaro LED taillights, CTS-V Front Brakes, Powder Coated Calipers By ME MGW Short Throw Shifter Complete ZL1 Rearend Swap Last edited by Stealth 2010 2SS/RS; 07-20-2013 at 09:10 PM.*

07-20-2013, 09:09 PM	#5
Stealth 2010 2SS/RS Drives: Black 2SS/RS M6 Join Date: Mar 2010 Location: Minnesota, Vadnais Heights Posts: 494 View My Garage	I'll have to give it a try in the morning. Your suggesting to wire the other analog together? __________________ 2010 LS3 2SS/RS M6 AirAid Cold Air Intake, AAC LED sidemarkers, AAC P13w plasmas drl, Kook's Custom 1-7/8" Headers, Corsa Hybrid Exhaust JRE 445 Cam Package, JRE SCT Tune, RX Catch Can and Breather Tech AFX Heater Hose Relocation Kit, Black Chrome Wheels Pfadt trailing and toe arms, Pfadt solid subframe mounts, Pfadt diff bushings, Street Slayer Twin Carbon Technostalgia Camaro LED taillights, CTS-V Front Brakes, Powder Coated Calipers By ME MGW Short Throw Shifter Complete ZL1 Rearend Swap

07-20-2013, 09:29 PM	#8
Stealth 2010 2SS/RS Drives: Black 2SS/RS M6 Join Date: Mar 2010 Location: Minnesota, Vadnais Heights Posts: 494 View My Garage	ok, thanks for the info. __________________ 2010 LS3 2SS/RS M6 AirAid Cold Air Intake, AAC LED sidemarkers, AAC P13w plasmas drl, Kook's Custom 1-7/8" Headers, Corsa Hybrid Exhaust JRE 445 Cam Package, JRE SCT Tune, RX Catch Can and Breather Tech AFX Heater Hose Relocation Kit, Black Chrome Wheels Pfadt trailing and toe arms, Pfadt solid subframe mounts, Pfadt diff bushings, Street Slayer Twin Carbon Technostalgia Camaro LED taillights, CTS-V Front Brakes, Powder Coated Calipers By ME MGW Short Throw Shifter Complete ZL1 Rearend Swap

07-21-2013, 05:34 PM	#9
Stealth 2010 2SS/RS Drives: Black 2SS/RS M6 Join Date: Mar 2010 Location: Minnesota, Vadnais Heights Posts: 494 View My Garage	nyny69 thanks for the help I found that my firewire cable didn't mach the two variations but found which wire are what and got it all working. Thanks. __________________ 2010 LS3 2SS/RS M6 AirAid Cold Air Intake, AAC LED sidemarkers, AAC P13w plasmas drl, Kook's Custom 1-7/8" Headers, Corsa Hybrid Exhaust JRE 445 Cam Package, JRE SCT Tune, RX Catch Can and Breather Tech AFX Heater Hose Relocation Kit, Black Chrome Wheels Pfadt trailing and toe arms, Pfadt solid subframe mounts, Pfadt diff bushings, Street Slayer Twin Carbon Technostalgia Camaro LED taillights, CTS-V Front Brakes, Powder Coated Calipers By ME MGW Short Throw Shifter Complete ZL1 Rearend Swap

07-20-2013, 09:21 PM	#7
nyny69 Drives: 2010 IOM SS Join Date: Aug 2009 Location: NY Posts: 1,397	Here is a link for the 2 different schemes. http://www.tricktuners.com/forums/showthread.php?t=194