07-30-2013, 11:05 PM | #1 |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
ZL1 FPCM????
Checking to see if anyone knows 100% sure if the 1LE has the ZL1 FPCM? I know it has the ZL1 pump but curious about the module. I"ve got the SLP TVS2300, ID850 injectors and LS9 cam installed with Dynotech headers, all from Jannetty, and Ted says my fuel pressure dropping off in the datalogs on the upper end. This is the last thing I expected since it has the ZL1 pump. Air fuel is perfect across the board also. Anyone else run into this? Appreciate any info. Thanks
|
07-31-2013, 10:20 AM | #2 |
instigator
Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010
Location: 72034
Posts: 3,979
|
put a ADM fpcm in it. easy answer.
__________________
-John S.
|
07-31-2013, 03:14 PM | #3 |
No Tags/Habitual Violator
Drives: 2012 SIM 2SS/RS & z71 Join Date: Sep 2011
Location: North Georgia
Posts: 2,379
|
Can you validate the pump is truly a ZL1 pump without dropping the tank or drilling any holes?
Or it may be easier to compare part numbers on the FPCM. Remove back seat and passenger panel to access it. *edit* Upon further review, two GM parts sites list the fuel system module as if it's the same for all models (v6 - LSA) Mechanical Catalog - 2013 - Chevrolet - CAMARO fuel system, fuel supply, control module Camaro All Assuming that's right, and you have the expected pump then ADM controller seems like the next logical step. Last edited by Southern Comfort; 07-31-2013 at 03:49 PM. |
07-31-2013, 09:46 PM | #4 |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
Ordered from ADM today. Thanks Andy!! I work at a Chevy dealership in parts and service, so I did compare part numbers. The pumps are the same in both ZL1 and 1LE, the FPCM does have the same part number across the board as stated by Southern Comfort but different programming for each car, v6 to ZL1.
Thanks fellas!!! |
|
|
|
|