Tucson Camaro's - Page 199 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jasycz28 · 04-25-2011, 10:49 PM

Quote:

Originally Posted by armysig

Today I picked up a few goodies from Unrestricted Motorsports, and tomorrow my car gets dropped off at "The Shop" in Tucson. I spoke with Don and he is pretty busy, but said my car should be done by next Friday. So no car this weekend for the races.

That's OK, because once it's done next week, I have a feeling my Camaro is going to get a LOT of attention.

I can't say I won't like that..

Anyways stay tuned, I think you guys will love what's about to happen to my car.

Tony,

Thanks for the pic!! I think we dwarf Scott though....hehehe

You could save a ton of money doing mods yourself, or with friends help.

armysig · 04-25-2011, 11:23 PM

Quote:

Originally Posted by jasycz28

You could save a ton of money doing mods yourself, or with friends help.

This isn't a typical ground effects install like you might see from GM. This kit needs to be bonded to the vehicle, which intails fitment, prep, bondo, and paint.

If I had mad, crazy fabrication skills and a shop I would do this on my own. But I'm just an RF guy working for the Army.

FLYNNZL1 · 04-25-2011, 11:43 PM

I can not wait to see it

jasycz28 · 04-26-2011, 12:04 AM

Quote:

Originally Posted by armysig

This isn't a typical ground effects install like you might see from GM. This kit needs to be bonded to the vehicle, which intails fitment, prep, bondo, and paint.

If I had mad, crazy fabrication skills and a shop I would do this on my own. But I'm just an RF guy working for the Army.

oh wow thought it was just performance parts.

copper3000 · 04-26-2011, 10:27 AM

Quote:

Originally Posted by armysig

This isn't a typical ground effects install like you might see from GM. This kit needs to be bonded to the vehicle, which intails fitment, prep, bondo, and paint.

If I had mad, crazy fabrication skills and a shop I would do this on my own. But I'm just an RF guy working for the Army.

Wow dude!
Now you've got me all fired up to see it!!

You still can come to the strip. Take my car and see what it can really do, seriously!

armysig · 04-26-2011, 10:47 AM

Quote:

Originally Posted by copper3000

Wow dude!
Now you've got me all fired up to see it!!

You still can come to the strip. Take my car and see what it can really do, seriously!

HA! Knowing my luck I'd break into the 12's with your car and then brand it for ever for all the parts you would have to buy to be race safe as instructed by the NHRA and IHRA rules...

I'll see if I can come out. I might have to sweet talk the wife..

Or get her drunk...and that can lead to some fun.:tweetz:

copper3000 · 04-26-2011, 11:46 AM

Quote:

Originally Posted by armysig

HA! Knowing my luck I'd break into the 12's with your car and then brand it for ever for all the parts you would have to buy to be race safe as instructed by the NHRA and IHRA rules...

I'll see if I can come out. I might have to sweet talk the wife..

Or get her drunk...and that can lead to some fun.:tweetz:

Lol...
See, you'll come out on top either way!

I'd love to find out she'll do 12s!!

40years · 04-26-2011, 01:32 PM

Quote:

Originally Posted by copper3000

Lol...
See, you'll come out on top either way!

I'd love to find out she'll do 12s!!

slickmetal · 04-26-2011, 02:22 PM

I want 12s this weekend!

I need your help...

After countless searches on the c5 site - I want to to get knockoff c6 z06 rims to slap on some DRs and save my Pzeros.

Please let me know the EXACT ones I need...I was seeing 18x9.5 (front)with a 35mm spacer?? Is this correct...so then what is the Drag Radial tire size I will need? This setup would include leaving the front rims/tires stock...yes? I hope to get everything ordered today in order to have mounted for Friday!

I know some of you have this setup..

Thanks!

kinyonZ28 · 04-26-2011, 04:18 PM

Quote:

Originally Posted by slickmetal

I want 12s this weekend!

I need your help...

After countless searches on the c5 site - I want to to get knockoff c6 z06 rims to slap on some DRs and save my Pzeros.

Please let me know the EXACT ones I need...I was seeing 18x9.5 (front)with a 35mm spacer?? Is this correct...so then what is the Drag Radial tire size I will need? This setup would include leaving the front rims/tires stock...yes? I hope to get everything ordered today in order to have mounted for Friday!

I know some of you have this setup..
Thanks!

hey ask jasycz28 his name is josh he just bought a set for his ride. he can get you the right sizes

copper3000 · 04-26-2011, 04:19 PM

Quote:

Originally Posted by 40years

Watch out, you may get a big surprise!

slickmetal · 04-26-2011, 04:54 PM

Quote:

Originally Posted by kinyonZ28

hey ask jasycz28 his name is josh he just bought a set for his ride. he can get you the right sizes

Roger.

I hope he chimes in. I remember talking to him at the last TnT we did...felt bad as he only got 1 run in for $20...and we all got sunburned in mostly overcast skies, lol. You back yet?

jasycz28 · 04-26-2011, 04:57 PM

Quote:

Originally Posted by slickmetal

I want 12s this weekend!

I need your help...

After countless searches on the c5 site - I want to to get knockoff c6 z06 rims to slap on some DRs and save my Pzeros.

Please let me know the EXACT ones I need...I was seeing 18x9.5 (front)with a 35mm spacer?? Is this correct...so then what is the Drag Radial tire size I will need? This setup would include leaving the front rims/tires stock...yes? I hope to get everything ordered today in order to have mounted for Friday!

I know some of you have this setup..

Thanks!

C6 Z06 fronts fit with a 305/45/18 tire. You have to make sure they are C6 Z06 18 X 9.5 with a 40MM offset. No spacer required.

40years · 04-26-2011, 06:47 PM

Quote:

Originally Posted by copper3000

Watch out, you may get a big surprise!

Holding breath.

04-25-2011, 11:43 PM	#2775
FLYNNZL1 Wicked ZL1 Drives: 2017 ZL1 A10 HBM Join Date: Apr 2009 Location: Tucson, AZ Posts: 3,175 View My Garage	I can not wait to see it __________________ 2017 Hyper Blue Metallic ZL1 A10/CF Hood Insert/PDR/NAV MODS: Rotofab CAI/V-MAX CNC Ported Throttle Body/Clear Bra/LED Reverse Light/Rock Guards/Lift Pads/Darkened Tail Lights/Ghost-Tinted LED Side Markers/Darkened 3rd Brake Light

04-26-2011, 02:22 PM	#2781
slickmetal Drives: 2013 Black ZL1 A6 Join Date: Feb 2011 Location: AZ Posts: 491 View My Garage	I want 12s this weekend! I need your help... After countless searches on the c5 site - I want to to get knockoff c6 z06 rims to slap on some DRs and save my Pzeros. Please let me know the EXACT ones I need...I was seeing 18x9.5 (front)with a 35mm spacer?? Is this correct...so then what is the Drag Radial tire size I will need? This setup would include leaving the front rims/tires stock...yes? I hope to get everything ordered today in order to have mounted for Friday! I know some of you have this setup.. Thanks! __________________ - 2013 Black ZL1 - A6 - Lingenfelter/Cordes Stage 2.5 packages E85 - FORE Fuel System - Kooks LTHs - Magnaflow Cans - Rotofab CAI/Big Gulp/Coolant Tank - Savini 3pc Forged - Underhood Dress Up (ACC & Drake & Moroso) - Hurst Shifter Kit - Custom Audio w/ JL Audio Sub/Amp/Stealthbox - Hand Polished Brace - Oracle Ghost Sidemarkers - LEDs everywhere - 624/617 on E85 & 545/548 on 91 (Sept 2015) - 693rwhp (Dec 15)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
70 Camaros reported at Wentzville, MO Rail Yard	Liberty1	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	34	08-26-2009 10:40 AM
Need Pic's of Camaro's!!!!!!!!	Camarosales70	Camaro Photos \| Spyshots \| Video \| Media Gallery	0	07-04-2009 11:14 PM
Chance to drive 2010 Camaros......	fbodfather	5th Gen Camaro SS LS LT General Discussions	15	06-18-2009 08:13 AM
Ton of new Camaros on cars.com	Shadowmind	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	5	06-01-2009 09:19 PM
Firsthand report: just sat in two Camaros at the Cleveland Auto Show	Attorneyguy	5th Gen Camaro SS LS LT General Discussions	154	03-01-2009 09:40 PM