ACS Bumper

[supasport]

I dont understand how the ACS T3 bumper changes the round fog lights of these cars? How do the fog light inserts change into the bigger inserts of the ACS?
also i see that phastek sells it for 400$ and some but is that the whole price for the whole conversion?

[Rcfiddy1]

You cut out the round fog lights using a template for the t3 ports and the new ports get glued in. The original fog lights than must be mounted on a seperate bracket or an alternative light must be used.

[supasport]

Originally Posted by Rcfiddy1

You cut out the round fog lights using a template for the t3 ports and the new ports get glued in. The original fog lights than must be mounted on a seperate bracket or an alternative light must be used.

looks really good. i like the lights you have in it.
how much did you pay all together and would you reccomend professional to do the work?

[Rcfiddy1]

Im a Do it yourself type but it is a little scary to cut your bumper. Altogether with the new ACS led lights it ran me about 800 to do for everything. If you goto a body guy its going to be a bit more for labor.

[supasport]

Originally Posted by Rcfiddy1

Im a Do it yourself type but it is a little scary to cut your bumper. Altogether with the new ACS led lights it ran me about 800 to do for everything. If you goto a body guy its going to be a bit more for labor.

almost as much as a conversion kit for the ZL1 bumper :s

[MikeMoach]

Hardest part about this mod was the clamps to hold the ports as they dry other then tht it's up to how big r ur b.... To cut into the bumper of ur car, was worth it to me I love mine

[bumblebeecamaro]

Here's a pic of my T3 ports with my preferred choice of LED lighting. The lights are also from eBay.

[TRC-SS]

Here is mine that i did.


I did the Ports and custom relocated the fogs to the lower grille.



ACS sells these Brackets to allow the factory Lights to mount on the inside of the ports.


And will look like this when done.

[supasport]

im really liking it however, can you guys link me to an a vendor that has the complete kit? so i know what im working with. I'd rather relocate the fogs and add an LED to the port. like the yellow and orange camaro up there. looks very good

[DET MUSL]

Originally Posted by bumblebeecamaro

Here's a pic of my T3 ports with my preferred choice of LED lighting. The lights are also from eBay.

Definitely my favorite here.

[alssiri]

I got these from ebay.







Ahmad

[MikeMoach]

Originally Posted by supasport

im really liking it however, can you guys link me to an a vendor that has the complete kit? so i know what im working with. I'd rather relocate the fogs and add an LED to the port. like the yellow and orange camaro up there. looks very good

http://www.acscomposite.com/store/#ecwid:category=2783405&mode=category&offset=0&sor t=normal

They r on this site sry I cudnt find them but tht is there site

[TRC-SS]

Everything you need is right here!

http://www.acscomposite.com/store/#e...=0&sort=normal

[Rcfiddy1]

Originally Posted by supasport

almost as much as a conversion kit for the ZL1 bumper :s

I would rather have the T3 ports since my intake is right behind the drivers side port and I get alot more airflow to keep my IATs down and the ZL1 bumper is just lights and does nothing for what I wanted. Also you will see more and more ZL1 clones driving around and I would rather be a bit different.