06-26-2013, 06:38 PM | #1 |
JT Synergy RS/2SS
Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013
Location: Hager City, WI
Posts: 697
|
Magnuson TVS 2300 purchase!
Hey guys,
I just purchased a new Magnuson (or "Maggie" as you guys call it) TVS 2300 and I am really excited! I've wanted one forever and I finally pulled the trigger. NICE!!! The reason for the post was to ask some advice on fuel injectors and BAP requirements with my current set-up. I already have LT headers, high-flow cats, Borla S-type axle back and a SCT tuner from Jannetty. I'm well aware that Ted will need to upgrade my tune, but looking for advice on anything that I might be missing? This blower should give me plenty of room to grow, but to be honest, I "think" I will be more than happy with the additional 120HP(?) that she should generate in "stock" form! Who knows? I really don't want to go crazy with HUGE injectors since I really think this will be all I need for quite a while. Not looking to make her a beast, just a killer street car, with the occasional drag strip thrown in for fun. Any advice is much appreciated. There's NO WAY I'm going to sleep tonight anyways! HA!!!! I fell like a little kid at Christmas. Thanks! John |
06-26-2013, 06:47 PM | #2 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
If you stick with the stock pulley, 3.8, you don't need either a bap or injectors. I believe you can even bump up to the 3.6 and be fine.
You're in gd hands with Ted. If you are approaching an area where the mods are necessary he will let you know. He won't let you drive around unsafe. Gd luck!! |
06-26-2013, 06:56 PM | #3 | |
JT Synergy RS/2SS
Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013
Location: Hager City, WI
Posts: 697
|
Quote:
|
|
06-26-2013, 07:10 PM | #4 | |
Stroked and blown
|
Quote:
It's a good idea to follow the advice of your tuner/builder. If your going to raise the boost, make sure your fuel system is in order. Better safe than sorry. IMHO
__________________
LME 416 LS3 shortblock/Callies Compstar 4340 4"crank/Callies 6.125 H beams rods/Wiesco 4.07 forged pistons/Cam Motion custom LS1/LME ported heads /maggie TVS2300/I West 8rib 10%OD /3.2 pulley/OD cog drive/JRE tensioner/ID850 /ADM dual fuel/Kooks LT 1 7/8/magna flow2.5 /cat delete/Roto Fab CAI /MGW short throw /SPEC super twin clutch/G Force built trans,carbon syncro rear shaft upgrade /DSS 9"single CF DS /Strange 3.70/31 spline trutrac/MT DR's/earls oil cooler /tuned KHC
|
|
06-26-2013, 07:27 PM | #5 | ||
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Quote:
Agreed Quote:
You'll loose a little boost with the headers. The 3.8 is like 6 psi and the 3.6 is about 8psi. Are you l99 or ls3? If you're shooting for 500 rwhp you shouldn't need a bap or injectors. I used the Maggie injectors at 550 rwhp and had no issues. Ted isn't going to sell you something you don't need so your best bet is to ask him why on the 80lb injectors? Seems like overkill to me but that's his job to know what's best. |
||
06-26-2013, 07:39 PM | #6 | |
JT Synergy RS/2SS
Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013
Location: Hager City, WI
Posts: 697
|
Quote:
I guess we'll see how Ted replies to my last email. Just wanted to educate myself before he responds. I def trust his advice. He's been great!! |
|
06-26-2013, 07:48 PM | #7 | |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Quote:
You never said you were buying a tuner kit with no injectors. That makes sense why Ted said go with xyz injectors. I'd would get what he wants you do. Prob the ID 850's. a little extra money but well worth it. There's nothing more important than the fuel system to your car. |
|
06-26-2013, 07:50 PM | #8 | |
JT Synergy RS/2SS
Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013
Location: Hager City, WI
Posts: 697
|
Quote:
|
|
06-26-2013, 07:53 PM | #9 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
|
06-26-2013, 08:51 PM | #10 | |
JT Synergy RS/2SS
Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013
Location: Hager City, WI
Posts: 697
|
Quote:
Thoughts. Thanks guys! |
|
06-26-2013, 09:03 PM | #11 |
Stroked and blown
|
Your not gonna like my answer ... I'd 850's ... Haven't heard a single bad thing about them. I got them and they do what they are supposed to do.
__________________
LME 416 LS3 shortblock/Callies Compstar 4340 4"crank/Callies 6.125 H beams rods/Wiesco 4.07 forged pistons/Cam Motion custom LS1/LME ported heads /maggie TVS2300/I West 8rib 10%OD /3.2 pulley/OD cog drive/JRE tensioner/ID850 /ADM dual fuel/Kooks LT 1 7/8/magna flow2.5 /cat delete/Roto Fab CAI /MGW short throw /SPEC super twin clutch/G Force built trans,carbon syncro rear shaft upgrade /DSS 9"single CF DS /Strange 3.70/31 spline trutrac/MT DR's/earls oil cooler /tuned KHC
|
06-26-2013, 09:13 PM | #12 |
You can find the injectors that come with the magnuson for sale all the time on this site. As most people pull them out with VERY little use or never even use them at all. Look under the Members Classifieds - V8 parts also under Forced Induction. Yes the ID850 are the top dog. But it's your cash and for $200 or so you can pick up some injectors that will get you to 500-550rwhp just fine.
People will beat you to death for it and tell you to just get the ID850s now because you will always want more power so why not be ready for it. But in the end your the one paying the bill. |
|
06-26-2013, 09:13 PM | #13 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
[QUOTE=11syn3rgy;6720814]That was one of the main reasons for me to post this. Wanted to get some suggestions on which size and brand to buy? I know the Jannetty sells ID850 injectors and I don't doubt that they are the best, but I'm not about to spend $1,000 on injectors. Maybe if I was running huge HP numbers like some of you guys, but hardly seems justified for my set up?
Thoughts. Thanks guys![/QUOTE Just get a set of the ls9 injectors. The ones that comes with the TVS kit. I didn't move to the ID's until over 600 rwhp. Correct. You need them, the OP doesn't..... Yet. |
06-26-2013, 09:25 PM | #14 |
Stroked and blown
|
Lol ^^^^^ I know all about yet
__________________
LME 416 LS3 shortblock/Callies Compstar 4340 4"crank/Callies 6.125 H beams rods/Wiesco 4.07 forged pistons/Cam Motion custom LS1/LME ported heads /maggie TVS2300/I West 8rib 10%OD /3.2 pulley/OD cog drive/JRE tensioner/ID850 /ADM dual fuel/Kooks LT 1 7/8/magna flow2.5 /cat delete/Roto Fab CAI /MGW short throw /SPEC super twin clutch/G Force built trans,carbon syncro rear shaft upgrade /DSS 9"single CF DS /Strange 3.70/31 spline trutrac/MT DR's/earls oil cooler /tuned KHC
|
|
|
Tags |
maggie, magnacharger, magnuson supercharger |
|
|