[Sharp Shifter]

What rpm did the torque peak at? I bet driving feels insane

[djfury05]

Originally Posted by zl1_tommy

Yes still stock. No idea man that goes way above my head lol.

Lol thanks anyways.. What size meth nozzles?

[BlaqWhole]

Originally Posted by TheElementalCashew

Really nice man! I'm looking at adding the Whipple next year.


Sent from my iPad using Tapatalk

Same here! With headers!!

[djfury05]

You need to add the Nick Williams 102mm throttle body. At 922rwhp I'd bet you'd see at the very minimum another 50rwhp with no other changes.

[ninetres]

Originally Posted by djfury05

You need to add the Nick Williams 102mm throttle body. At 922rwhp I'd bet you'd see at the very minimum another 50rwhp with no other changes.

I'll take the under. $

[Jontall]

Ass-kicking numbers... Awesome.

[zl1_tommy]

Originally Posted by djfury05

You need to add the Nick Williams 102mm throttle body. At 922rwhp I'd bet you'd see at the very minimum another 50rwhp with no other changes.

My stock throttle body has been ported. I don't see the value right now.

[7WSM]

Originally Posted by djfury05

You need to add the Nick Williams 102mm throttle body. At 922rwhp I'd bet you'd see at the very minimum another 50rwhp with no other changes.

I would like to see what you based this off of. You would be lucky to make 10RWHP with a TB on most cars.

[EDFHOBBIES]

Originally Posted by 7WSM

I would like to see what you based this off of. You would be lucky to make 10RWHP with a TB on most cars.

Probably loose power in most cases lol.. I know in NA they had problem 400 bucks for 1hp and throttle had some bad spots..

[zl1_tommy]

I'm sure that thing costs $700-$800 and the gains (if any) above a ported stock TB would be minimal.

[HyperBlueX2]

One wicked ZL1 Tommy........

[djfury05]

Originally Posted by 7WSM

I would like to see what you based this off of. You would be lucky to make 10RWHP with a TB on most cars.

Its an 87mm ID opening on stock throttle body ported to who knows what on his. Snout opening on Whipple is 109mm reduced to either 90 or 102 with an adapter plate. A 4" intake is also 102mm ID. Therefore he has a restriction period.

Whipple has tested the blower on a bone stock ZL1 and saw 3" on vacuum because of throttle body. They said expect about 25rwhp all other things equal.

This really is not new mind blowing stuff here. Ported/bigger throttle bodies don't work well on centri cars because the air is pushed through the opening not sucked like on roots/PD blowers. The centri blowers care not about the size. A larger throttle body would absolutely benefit his setup especially at his power levels.

Additionally the NW 102mm is not $7-800 it's $650 at list price. I got mine slightly used for $450 shipped which is only $75 more than the Tony Mamo that everyone loves.

[nancygrl]

Yowza

[scooter k]

Did you put in a small fuel cell for the meth or using the washer tank?