IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15] - Page 129 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hammdo · 01-20-2018, 06:25 PM

Quote:

Originally Posted by RubyCamaro

Take care of yourself & feel better soon.

Thanks Jan, it sucks for sure...

-Don

hammdo · 01-21-2018, 04:45 PM

Here are some shots of the splitter:

Sturdy and ready to go - can't wait to install it -- ONLY bad thing is I have to remove the splitter if I ever need to get the bumper off...

-Don

Ashen 6.2 · 01-22-2018, 05:27 AM

Great looking splitter! Hope you get to feeling better soon Don!

hammdo · 01-22-2018, 10:04 AM

Thanks!

I’ll be over it in a couple days. Then, splitter is going on!

-Don

hammdo · 01-23-2018, 07:27 PM

Well, finally felt good enough to install the splitter. Unbolted the old one, unbolted the wheel splash shield bolts, and installed -- of course, the 3 M6 bolts (20 mm in length) were too short and no new ones came with the kit so out I went and bought M6 1.0 40 and 45 MM lengths with washers -- 40's worked.

Here it is with the old one removed:

Bolted on!:

Looks bigger in person!

Between the ZL1 and the ZL1 Addon splitter, I'd say its probably about the same or slightly bigger than the Z/28s -- I'll compare it when the Z group gets together for another outing....

-Don

Ashen 6.2 · 01-23-2018, 08:41 PM

That looks good Don!

hammdo · 01-23-2018, 09:00 PM

Keep walking out to the garage and gaze at it ;o)...

-Don

hammdo · 01-24-2018, 10:53 PM

Love, love, LOVE the splitter! Car drove excellent and I believe the rear belly pan is absorbing some of the diff noise! Car seems considerably quiet.

No buffeting and the aero is awesome. Won’t know how much until I track it again but, really pleased over all.

Need a track day!

-Don

QUICRNU · 01-25-2018, 11:23 AM

Looks badass man!! We would like a side full body profile shot when you feel better!

hammdo · 01-25-2018, 03:52 PM

Quote:

Originally Posted by QUICRNU

Looks badass man!! We would like a side full body profile shot when you feel better!

Here we go:

Before:

After:

-Don

Sapphire · 01-26-2018, 09:04 AM

man that looks sharp!

hammdo · 01-26-2018, 06:50 PM

Thanks Sarah! All set to run NCM now!

-Don

QUICRNU · 01-26-2018, 10:12 PM

Very Nice

hammdo · 01-28-2018, 05:40 PM

Got a chance to take her out for a 'strong' drive, tested the aero out a bit, the car is VERY stable at various speeds so I'm expecting this setup to perform really well during turns and straights. Wish I could push it harder but I'll have to wait until a track day.

Overall, very please at how stable and controllable she feels. Looking forward to a track day now!

-Don

01-21-2018, 04:45 PM	#1794
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Here are some shots of the splitter: Sturdy and ready to go - can't wait to install it -- ONLY bad thing is I have to remove the splitter if I ever need to get the bumper off... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-22-2018, 05:27 AM	#1795
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 2,000 View My Garage	Great looking splitter! Hope you get to feeling better soon Don! __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

01-22-2018, 10:04 AM	#1796
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Thanks! I’ll be over it in a couple days. Then, splitter is going on! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-23-2018, 07:27 PM	#1797
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Well, finally felt good enough to install the splitter. Unbolted the old one, unbolted the wheel splash shield bolts, and installed -- of course, the 3 M6 bolts (20 mm in length) were too short and no new ones came with the kit so out I went and bought M6 1.0 40 and 45 MM lengths with washers -- 40's worked. Here it is with the old one removed: Bolted on!: Looks bigger in person! Between the ZL1 and the ZL1 Addon splitter, I'd say its probably about the same or slightly bigger than the Z/28s -- I'll compare it when the Z group gets together for another outing.... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-23-2018, 08:41 PM	#1798
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 2,000 View My Garage	That looks good Don! __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

01-23-2018, 09:00 PM	#1799
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Keep walking out to the garage and gaze at it ;o)... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-24-2018, 10:53 PM	#1800
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Love, love, LOVE the splitter! Car drove excellent and I believe the rear belly pan is absorbing some of the diff noise! Car seems considerably quiet. No buffeting and the aero is awesome. Won’t know how much until I track it again but, really pleased over all. Need a track day! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-25-2018, 11:23 AM	#1801
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	Looks badass man!! We would like a side full body profile shot when you feel better! __________________ Apex Focused

01-26-2018, 09:04 AM	#1803
Sapphire Drives: 2013 2SS Hot Wheels Edition Join Date: May 2013 Location: Tennessee Posts: 2,782	man that looks sharp! __________________

01-26-2018, 06:50 PM	#1804
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Thanks Sarah! All set to run NCM now! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-26-2018, 10:12 PM	#1805
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	Very Nice __________________ Apex Focused

01-28-2018, 05:40 PM	#1806
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Got a chance to take her out for a 'strong' drive, tested the aero out a bit, the car is VERY stable at various speeds so I'm expecting this setup to perform really well during turns and straights. Wish I could push it harder but I'll have to wait until a track day. Overall, very please at how stable and controllable she feels. Looking forward to a track day now! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 01-28-2018 at 06:17 PM.