Who is interested in a ZL1 chin spoiler rub strip? - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

autoguy · 03-18-2013, 06:45 PM

Quote:

Originally Posted by Firefighter

What does it take to get you to consider it? A number of pre-orders? Group buy or something?

I will have to try and find one on a local dealers lot to see what it would take to make a pattern and have them done. I believe it is the same as the Hot Wheels and Dusk Edition spoilers.

Firefighter · 03-18-2013, 07:13 PM

Quote:

Originally Posted by autoguy

I will have to try and find one on a local dealers lot to see what it would take to make a pattern and have them done. I believe it is the same as the Hot Wheels and Dusk Edition spoilers.

I believe that is correct. I've had vehicles with low front spoilers/air dams like this and before you know it they are all scraped up and eventually split.

So I would like a product like this to prevent that mangled front end. I'd appreciate a product like this and I'm sure others would too. At the price of the ZL1 piece I would definatley buy one.

There should be more vehicles out there with this spoiler too. More potential sales.

babigguy · 03-18-2013, 07:19 PM

Quote:

Originally Posted by autoguy

All Pre ordered kits are going out today via USPS priority mail.

Thanks for the info!!!!

autoguy · 03-18-2013, 09:53 PM

All Orders are packed and out for USPS Pickup tomorrow AM. Please post pics and leave feedback. Thanks!!

autoguy · 03-20-2013, 12:19 AM

Can a mod please merge this thread with the one below?

http://www.camaro5.com/forums/showthread.php?t=265376

hawk02 · 03-23-2013, 11:54 PM

Quote:

Originally Posted by autoguy

All Orders are packed and out for USPS Pickup tomorrow AM. Please post pics and leave feedback. Thanks!!

My order for the high density plastic version arrived on Thursday. The temps reached the mid 40's yesterday so I took advantage of the warmer weather to install the protector.

I'd give the product an A- for quality. One of the straight pieces was slightly warped at one end. This is probably a non-issue with the aluminum version.

Removing the 18 screws from the splitter was rather tedious but other than that installation was straight forward.

The product definitely looks like it will protect the bottom of the splitter from scrapes.

Here are some photos before and after the install.

autoguy · 03-24-2013, 10:05 AM

Thanks for the pics and review. As far as the minimal gap on the end of the straight piece, it is possibly from shipping. If you take that piece off, bend it hard in the opposite direction and reinstall it, you should be good to go. It is very tough and flexible material, so breaking it should not be a fear. Just don't try to bend it in half!!

Stackerz71 · 04-18-2013, 07:42 PM

I'm also interested in this for the 1LE!

bumblebeecamaro · 04-18-2013, 08:04 PM

Are these in stock ready to ship?

autoguy · 04-18-2013, 09:08 PM

Quote:

Originally Posted by bumblebeecamaro

Are these in stock ready to ship?

Yes, both plastic and Aluminum in stock ready to ship.

jashobbsie · 04-20-2013, 06:44 AM

how much does it weigh?

AG454 · 04-20-2013, 08:42 AM

Any chance you could make this for the SS with factory ground effects?

ZL1Naboz · 04-20-2013, 10:27 AM

Quote:

Originally Posted by autoguy

Yes, both plastic and Aluminum in stock ready to ship.

Just ordered the aluminum one today. Still in stock and ready to ship?

hawk02 · 04-20-2013, 11:29 AM

Quote:

Originally Posted by jashobbsie

how much does it weigh?

I installed the high density black plastic version and would guesstimate the weight of all 5 pieces adds up to less than 1/2 a pound.

Applying some Adams Super VRT to the outer edge of the protector made the color blend better with the color of splitter. Now you can hardly tell I have the protector installed.

View Poll Results: Interested in a ZL1 lower chin spoiler rub strip?
Yes	125	86.81%
No	19	13.19%
Voters: 144. You may not vote on this poll

04-18-2013, 08:04 PM	#65
bumblebeecamaro Car Lover By Nature Drives: 2016 Hyper Blue Metallic SS Join Date: Dec 2009 Location: Central FL Posts: 2,327 View My Garage	Are these in stock ready to ship? __________________

04-20-2013, 08:42 AM	#68
AG454 I am not "Fast & Furious" Drives: 2010 Camaro LSX454 1LE Join Date: Nov 2008 Location: Greeley Colorado Posts: 1,040 View My Garage	Any chance you could make this for the SS with factory ground effects? __________________ The day I take a bend too fast Judgement that could be my last I'll be wiped right off the slate Don't wait up 'cause I'll be late, I'll be late

03-18-2013, 09:53 PM	#60
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	All Orders are packed and out for USPS Pickup tomorrow AM. Please post pics and leave feedback. Thanks!!

03-20-2013, 12:19 AM	#61
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	Can a mod please merge this thread with the one below? http://www.camaro5.com/forums/showthread.php?t=265376

03-24-2013, 10:05 AM	#63
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	Thanks for the pics and review. As far as the minimal gap on the end of the straight piece, it is possibly from shipping. If you take that piece off, bend it hard in the opposite direction and reinstall it, you should be good to go. It is very tough and flexible material, so breaking it should not be a fear. Just don't try to bend it in half!!

04-18-2013, 07:42 PM	#64
Stackerz71 Drives: Camaro SS 1LE Join Date: Apr 2013 Location: Orlando, FL Posts: 2	I'm also interested in this for the 1LE!

04-20-2013, 06:44 AM	#67
jashobbsie Davenport Stage 5+ Drives: Camaro ZL1 & C7 Corvette 3LT Z51 Join Date: May 2012 Location: Alberta, Canada Posts: 471 View My Garage	how much does it weigh?