2010 Camaro SS Texas Speed Prototype Induction Results - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jon@Texas-Speed · 05-21-2009, 03:24 PM

We recently finished testing 5 different versions of the TSP 2010 Camaro SS air intake kit. We've finally decided on a version that worked the best overall on the several cars we've tested it on. This kit will feature everything you need to do a complete install on your SS in your driveway. The combo has been dyno tested with several different modification combos.

Here's a copy of a couple of the dyno sheets & a image of the prototype. Keep in mind it will have some changes & look a lot nicer when it's a final version, this is just a basic proof-of-concept prototype. The final version will include several changes such as trim for the heat deflector, full ceramic coating, just to name a few...

Pricing is available on our website & the first run of intakes will be ready in less than 2 weeks!!

cheesesauce · 05-21-2009, 04:12 PM

Very nice. I'm not seeing anything on the website about it though.

Also, do you guys have any info on when the long tubes and catback will be avilable and the price?

Thanks

Dan2510 · 05-21-2009, 05:27 PM

any pic's of it installed on the car?

LS3SSRS · 05-21-2009, 06:24 PM

sweet

Andro · 05-21-2009, 07:12 PM

Noice!

wavrun2000 · 05-21-2009, 08:39 PM

Yeah I would like to see some install pictures. Did you leave the windshield washer fluid in tact

blackedout010 · 05-21-2009, 09:52 PM

looking good

Jason 98 TA · 05-21-2009, 10:17 PM

more pics & info coming in the next week or so guys.

Feel free to give us a call if you have any questions. I think you'll be very happy with the finished product, and the price!!!

fdjizm · 05-22-2009, 07:23 AM

See now this is a nice one piece intake molded for the camaro, unlike henneseys $400 two pipe intake.

MARO-KEEN · 05-22-2009, 02:58 PM

Great job guys

MerF · 05-22-2009, 03:10 PM

Was this an engine dyno on an L99? If not, this is the best rwhp dyno I have yet seen for an LS3...even the baseline.

05-21-2009, 03:24 PM	#1
Jon@Texas-Speed Drives: 01 SS Camaro / 07 Silverado Join Date: May 2009 Location: Lubbock, TX Posts: 197	2010 Camaro SS Texas Speed Prototype Induction Results We recently finished testing 5 different versions of the TSP 2010 Camaro SS air intake kit. We've finally decided on a version that worked the best overall on the several cars we've tested it on. This kit will feature everything you need to do a complete install on your SS in your driveway. The combo has been dyno tested with several different modification combos. Here's a copy of a couple of the dyno sheets & a image of the prototype. Keep in mind it will have some changes & look a lot nicer when it's a final version, this is just a basic proof-of-concept prototype. The final version will include several changes such as trim for the heat deflector, full ceramic coating, just to name a few... Pricing is available on our website & the first run of intakes will be ready in less than 2 weeks!!

05-21-2009, 06:24 PM	#4
LS3SSRS Drives: 2010 IBM SS/RS Join Date: Oct 2008 Location: Edmonton, Alberta Posts: 805	sweet __________________ sold 2010 2SS/RS, 6spd manual, imperial blue metallic w/black leather Blacked out tail/signal lights, 5% rear tint, 20% sides, Dynomax Bullet mufflers, Barton short throw shifter, Clear Image offroad downpipes

05-21-2009, 07:12 PM	#5
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,214 View My Garage	Noice! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
2010 Mustang GT vs 2010 Camaro SS	Fireball	Chevy Camaro vs...	257	05-18-2009 11:04 AM

05-21-2009, 04:12 PM	#2
cheesesauce Drives: 2SS/RS Join Date: Oct 2008 Location: Pembroke Pines, Fl Posts: 70	Very nice. I'm not seeing anything on the website about it though. Also, do you guys have any info on when the long tubes and catback will be avilable and the price? Thanks

05-21-2009, 05:27 PM	#3
Dan2510 Drives: 2012 LS3 2SS/RS IBM Join Date: Mar 2009 Location: Chicago Posts: 143	any pic's of it installed on the car?

05-21-2009, 08:39 PM	#6
wavrun2000 o come on Drives: 06 GTO Join Date: Nov 2008 Location: Naples FL Posts: 437	Yeah I would like to see some install pictures. Did you leave the windshield washer fluid in tact

05-21-2009, 09:52 PM	#7
blackedout010 Drives: on order black 2010 2ss Join Date: Mar 2009 Location: north carolina Posts: 913	looking good

05-21-2009, 10:17 PM	#8
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,669	more pics & info coming in the next week or so guys. Feel free to give us a call if you have any questions. I think you'll be very happy with the finished product, and the price!!!

05-22-2009, 07:23 AM	#9
fdjizm Account Suspended Drives: 2008 Mustang GT/CS Join Date: Mar 2009 Location: New Jersey Posts: 1,429 View My Garage	See now this is a nice one piece intake molded for the camaro, unlike henneseys $400 two pipe intake.

05-22-2009, 02:58 PM	#10
MARO-KEEN Drives: 2001 Camaro Join Date: Mar 2009 Location: Richmond, Tx Posts: 80	Great job guys

05-22-2009, 03:10 PM	#11
MerF Go Rays! Drives: 03 Trailblazer Join Date: May 2007 Location: St Pete, Florida Posts: 2,533	Was this an engine dyno on an L99? If not, this is the best rwhp dyno I have yet seen for an LS3...even the baseline.