Hose Relocate Kit for Maggie Install w/Coil-Engine Covers - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

alfie43 · 05-07-2010, 11:04 PM

I am waiting on delivery of my Magnacharger and I want to have all the needed parts ready when it arrives. I also ordered a pair of Roto-Fab / Lingenfelter coil-engine covers with the boxed ends (see photo). Roto-Lab told me that to use these covers, I will have to relocate the heater hoses and maybe the fuel lines.

Here is my question: If you have a Magnacharger and these engine covers, did your Maggie kit come with necessary material to properly reroute your hoses? Or will I have to buy a Hose Relocation Kit from ADM or TechAFX (see photo)?

Alfie

ADM PERFORMANCE · 05-08-2010, 08:30 AM

Quote:

Originally Posted by alfie43

I am waiting on delivery of my Magnacharger and I want to have all the needed parts ready when it arrives. I also ordered a pair of Roto-Fab / Lingenfelter coil-engine covers with the boxed ends (see photo). Roto-Lab told me that to use these covers, I will have to relocate the heater hoses and maybe the fuel lines.

Here is my question: If you have a Magnacharger and these engine covers, did your Maggie kit come with necessary material to properly route your hoses? Or will I have to buy a Hose Relocation Kit from ADM or TechAFX (see photo)?

Alfie

Buy them,you will thank me later-

http://www.admperformance.com/produc...50&product=210

Andy

Legend · 05-08-2010, 11:01 AM

I have the maggie, those covers as well...I did not use the relocation kit for the heater hoses.

It works without the kit but certainly looks cleaner with the kit!

The one thing that you will have to do to use those covers is relocate the reservoir from the passenger side to the the drivers side.

Here's mine with the reservoir relocated but the heater hoses are still in place.

I want to get this kit myself since it does clean up the hoses! Fuel lines do not get relocated, only disconnect and then reconnect to get thru the cover (passenger side).

alfie43 · 05-10-2010, 07:47 AM

Quote:

Originally Posted by Legend

I have the maggie, those covers as well...I did not use the relocation kit for the heater hoses.

It works without the kit but certainly looks cleaner with the kit!

The one thing that you will have to do to use those covers is relocate the reservoir from the passenger side to the the drivers side.

Here's mine with the reservoir relocated but the heater hoses are still in place.

I want to get this kit myself since it does clean up the hoses! Fuel lines do not get relocated, only disconnect and then reconnect to get thru the cover (passenger side).

Did you get your covers from Roto-Fab or Lingenfelter? How well made were the mounting brackets.
Alfie

Legend · 05-10-2010, 07:56 AM

Got mine from Roto-Fab...top notch product, fit and finish are near perfect if not perfect and the mounting brackets are sturdy and stable! One heck of a product!! Love it!!

FloMoCamaro · 05-10-2010, 08:23 AM

Quote:

Originally Posted by Legend

Got mine from Roto-Fab...top notch product, fit and finish are near perfect if not perfect and the mounting brackets are sturdy and stable! One heck of a product!! Love it!!

+1

I just got my covers in from Roto-Fab, I can't wait to get them installed.

krazee · 05-10-2010, 08:27 AM

those covers look awsome!

alfie43 · 05-10-2010, 12:05 PM

Quote:

Originally Posted by Legend

I have the maggie, those covers as well...I did not use the relocation kit for the heater hoses.

It works without the kit but certainly looks cleaner with the kit!

The one thing that you will have to do to use those covers is relocate the reservoir from the passenger side to the the drivers side.

Here's mine with the reservoir relocated but the heater hoses are still in place.

I want to get this kit myself since it does clean up the hoses! Fuel lines do not get relocated, only disconnect and then reconnect to get thru the cover (passenger side).

Glad to hear that because I also ordered mine from Roto-Fab and yours are drop dead gorgeous. They are in the paint shop today and I should see them next week.

I ordered the Hose Relocate Kit from TechAFX.

Gotta love your chrome/polished Maggie housing. I didn't dig deep enough to pull out the additional 9 Benjamin Franklins for that, but seeing yours makes me wish I should have.

Can you provide additional details on the reservoir relocate? I am not sure which reservoir are we talking about. Can you point it out on your photo? Did Magnacharger provide new mounting hardware for this?

Thanks for your input.

Alfie

markssylver · 05-10-2010, 05:41 PM

the coolant resevoir for the maggie gets relocated to the drivers side from the pass side vavle cover

2010 SSRS · 05-10-2010, 08:54 PM

awesome covers

lexlueger · 03-25-2011, 11:01 PM

I need help with this:(. How hard is the relocation?

Buffnshine · 03-25-2011, 11:26 PM

Quote:

Originally Posted by FloMoCamaro

+1

I just got my covers in from Roto-Fab, I can't wait to get them installed.

Stunning covers

metallicide · 03-26-2011, 08:55 AM

I def need to get one of those kits, cleans it up alot, here is mine without the hose relocation with roto-fab covers.

lexlueger · 03-28-2011, 12:42 PM

Where/what did you mount the reservoir after relocating it ?

05-07-2010, 11:04 PM	#1
alfie43 Drives: S/C 2SS/RS Camaro-6M-VicRed Join Date: Aug 2009 Location: Alfie (Mariano) lives in Shelby Twp, Metro-Detroit Posts: 1,119 View My Garage	Hose Relocate Kit for Maggie Install w/Coil-Engine Covers I am waiting on delivery of my Magnacharger and I want to have all the needed parts ready when it arrives. I also ordered a pair of Roto-Fab / Lingenfelter coil-engine covers with the boxed ends (see photo). Roto-Lab told me that to use these covers, I will have to relocate the heater hoses and maybe the fuel lines. Here is my question: If you have a Magnacharger and these engine covers, did your Maggie kit come with necessary material to properly reroute your hoses? Or will I have to buy a Hose Relocation Kit from ADM or TechAFX (see photo)? Alfie Attached Images __________________ Last edited by alfie43; 05-08-2010 at 10:50 AM.

05-08-2010, 11:01 AM	#3
Legend Hello! Drives: 2008 JSB Z06! Join Date: Oct 2008 Location: Texas Posts: 2,624 View My Garage	I have the maggie, those covers as well...I did not use the relocation kit for the heater hoses. It works without the kit but certainly looks cleaner with the kit! The one thing that you will have to do to use those covers is relocate the reservoir from the passenger side to the the drivers side. Here's mine with the reservoir relocated but the heater hoses are still in place. I want to get this kit myself since it does clean up the hoses! Fuel lines do not get relocated, only disconnect and then reconnect to get thru the cover (passenger side). Attached Images

05-10-2010, 08:54 PM	#10
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	awesome covers __________________ Jannetty Racing JRE Street Package

03-25-2011, 11:01 PM	#11
lexlueger Drives: V10 BMW M5, Supercharged 2SS/RS Join Date: Jun 2010 Location: Charlotte NC /Brooklyn NY Posts: 2,305	I need help with this:(. How hard is the relocation? __________________ MAST 416 STROKER: STAGE 3 TVS 2300 CUSTOM CAM TPIS 102 TB IW 8 RIB PULLEY W/ OD COG REARS NX EXPRESS/NANO KIT KDI HEAT EXCHANGER/ROTOFAB RESERVOIR CIRCLE D 2800 TC/FLEX PLATE/ADM TRANS COOLER DSS DRIVESHAFT/1400 HP AXLES EATON TRUETRAC -LPE 3.27 GEARS DYNATECH HEADERS/MAGNAFLOW EXHAUST SQUASH RETURN STYLE FS ID 850's E85/ FLEXFUEL BMR/EIBACH SUSPENSION KILL MODE, ON.

03-26-2011, 08:55 AM	#13
metallicide Drives: 2010 Camaro 2SS Join Date: Jul 2010 Location: Illinois Posts: 398	I def need to get one of those kits, cleans it up alot, here is mine without the hose relocation with roto-fab covers. Attached Images __________________

05-10-2010, 07:56 AM	#5
Legend Hello! Drives: 2008 JSB Z06! Join Date: Oct 2008 Location: Texas Posts: 2,624 View My Garage	Got mine from Roto-Fab...top notch product, fit and finish are near perfect if not perfect and the mounting brackets are sturdy and stable! One heck of a product!! Love it!!

05-10-2010, 08:27 AM	#7
krazee Account Suspended Drives: 2010 inferno orange rs/2ss Join Date: May 2010 Location: jackson,nj Posts: 3	those covers look awsome!

05-10-2010, 05:41 PM	#9
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 332	the coolant resevoir for the maggie gets relocated to the drivers side from the pass side vavle cover

03-28-2011, 12:42 PM	#14
lexlueger Drives: V10 BMW M5, Supercharged 2SS/RS Join Date: Jun 2010 Location: Charlotte NC /Brooklyn NY Posts: 2,305	Where/what did you mount the reservoir after relocating it ? __________________ MAST 416 STROKER: STAGE 3 TVS 2300 CUSTOM CAM TPIS 102 TB IW 8 RIB PULLEY W/ OD COG REARS NX EXPRESS/NANO KIT KDI HEAT EXCHANGER/ROTOFAB RESERVOIR CIRCLE D 2800 TC/FLEX PLATE/ADM TRANS COOLER DSS DRIVESHAFT/1400 HP AXLES EATON TRUETRAC -LPE 3.27 GEARS DYNATECH HEADERS/MAGNAFLOW EXHAUST SQUASH RETURN STYLE FS ID 850's E85/ FLEXFUEL BMR/EIBACH SUSPENSION KILL MODE, ON.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complete ******** install from a Novice	Susantroy1	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	63	07-31-2015 01:25 PM
LLT engine specifications	Tran	Wiki	2	03-29-2010 10:06 AM
LS9 SC old news. Here comes the LSX. 850HP, 840 lb-ft of Torgue	13F20	5th Gen Camaro SS LS LT General Discussions	15	09-22-2008 04:35 PM
GM moves closer to HCCI engine production	Scotsman	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	16	05-16-2008 06:16 PM
Axial Vector Engine	Mr. Wyndham	General Automotive + Other Cars Discussion	6	06-20-2007 04:00 PM