12-07-2011, 08:57 PM | #1261 |
Drives: 2005 C6 Join Date: Apr 2011
Location: Garwood, NJ
Posts: 146
|
Hi SGOS252382, we would like our car's info updated on the list in this section. "Internal Engine Mods plus Bolt-Ons (eg. bolt-ons plus heads and/or cam), Stock Displacement" Best ET is 10.936 @ 127.29 mph
Here is a list of mods on it. Kooks 2” long tube headers Kooks off-road x-pipe Cartek ported and machined (in house) 4X LS3 heads Cartek custom grind camshaft Cartek ported 90MM throttle body Cartek ported 102MM FAST intake Cartek custom tuning Vararam CAI Under-drive pulley Monster clutch Cartek installed 4.10s http://www.youtube.com/watch?feature...&v=ACO8OMtxRiE Thanks, Julio |
12-09-2011, 05:40 AM | #1262 | |
Drives: 2010 SS & 2008 C6 Join Date: Mar 2008
Location: VA
Posts: 1,819
|
Kinda late reply, but awesome job Jason!!!!
Quote:
__________________
2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter.
Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list.. |
|
12-09-2011, 06:56 PM | #1263 |
Drives: 2011 CGM 2SS/RS L99 Join Date: Jan 2011
Location: Edison NJ
Posts: 115
|
Id like to add my updated times to the list. I was at a track rental at Atco raceway today and got the best numbers out of the car to date. Thanks to Doug and Matt at ECS spending the time helping me get the car dialed in right and loaing me a better set of drag radials. The only difference from the previous runs i made are a better set of tires, and some weight reduction. These are my last four passes so the car is running consistantly.
Tires used on the pass: Mickey thompson 305/45/18 drag radials Performance Mods (if any):tsp 229/236 cam tsp ported heads,DOD and VVT delete,Fast 102 intake, Vmax ptb,kooks headers and complete system, CAI cold air, circle d 3200 stall with a built 6l80e..installed and tuned by ECS. Category submitted for:Internal Engine Mods/stock displacement R/T .417 60' 1.661 330' 4.750 660' 7.306 660’ mph 97.30 1000' 9.507 1320' 11.366 1320’ mph 121.64 Name of the track: Date of pass:12/9/11 Weather conditions: (include Density Altitude, if known): 48-50 degrees
__________________
2011 SS/RS A6
TSP 229/236, TSP ported heads, FAST 102 intake, Vmax ported throttle body, Circle D 3200 stall, CAI cold air intake, Kooks complete system, installed and tuned by ECS 11.36@121 |
12-11-2011, 10:02 PM | #1264 |
Drives: 2ss camaro Join Date: May 2010
Location: NC
Posts: 118
|
New time
Tires used on pass: 17" weld rims skinnies in front DRs
Performance mods: (L99 A6) Cam,LT,CAI,Converter,Tune,17" rims,Skinnies,DRs Internal mods plus bolt ons R/T.......2.1031 60'........1.6809 330'......4.8004 660'......7.3631 660'mph..96.15 1000'......n/a 1320'......11.4785 1320'mph..119.62 Name of track: Fayetteville Motorsports Park Date of Pass: 12/11/2011 |
12-12-2011, 01:11 PM | #1265 | |
Drives: 2005 C6 Join Date: Apr 2011
Location: Garwood, NJ
Posts: 146
|
Hi SGOS252382, we would like our car's info updated again on the list in this section. "Internal Engine Mods plus Bolt-Ons (eg. bolt-ons plus heads and/or cam), Stock Displacement" Best ET is 10.837 @ 128.48 mph
Here is a list of mods on it. Kooks 2” long tube headers Kooks off-road x-pipe Cartek ported and machined (in house) 4X LS3 heads Cartek custom grind camshaft Cartek ported 90MM throttle body Cartek ported 102MM FAST intake Cartek custom tuning Vararam CAI Under-drive pulley Monster clutch Cartek installed 4.10s Thanks, Julio |
|
12-15-2011, 01:45 PM | #1266 |
Quit being a pu$$y
|
How about adding in if the car is a coupe or a convertible? It would be nice to see how the verts stack up against the coupes with the added weight and decreased chassis rigidity.
__________________
|
12-15-2011, 03:37 PM | #1267 | |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
Quote:
If anyone else has posted a time that has a "Vert" let me know and I'll add it. |
|
12-18-2011, 12:11 PM | #1268 |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
I just barely improved my time (12.120 @ 113.69 mph). Track prep was terrible and I only got two decent runs (still had some hop and spin). My other runs were nothing but wheel spin.
It's time for some new tires. These 20" NT555Rs just wouldn't hook (20 psi) and a nice long burnout. Bolt ons category. Mods CAI, LT, Exhaust, PTB, Tune, Converter, 20" DRs (full weight - no seats removed, jack, etc) Conditions were good (60-65 degrees, sunny, low humidity) DA probably near 0 |
12-18-2011, 08:56 PM | #1269 |
Only drives on Sundays
Drives: '16 2SS A8 NPP MRC NGray Join Date: Feb 2011
Location: Dalton, GA
Posts: 2,500
|
This should be it for the Winter. Improved my personal best.
Tires used on the pass: 18" Mickey Thompson DR's Performance Mods (if any): Bolt-ons, 3.45, 3200 TC, GT-9 cam Category submitted for: Internal Engine Mods plus Bolt-Ons R/T.......... .559 60'............. 1.605 330'........... 4.793 660'........... 7.434 660’ mph... 94.56 1000'.......... 1320'.......... 11.633 1320’ mph… 118.01 Name of the track: Alabama International Dragway Date of pass: 12/18/2011 Weather conditions: (include Density Altitude, if known): DA -533 Video: Padre |
12-19-2011, 04:02 PM | #1270 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
RENE
2011 CAMARO SS BUILT CIRCLE D TRANNY 3600 STALL PFAFT TRAILING ARMS PFAFT TOE RODS DSS AXLES ECS NOVI 1500 CAM PORTED TB BOGART DRAG WHEELS HEADERS ALKY METH KIT |
12-19-2011, 04:16 PM | #1271 |
|
|
12-26-2011, 11:10 PM | #1272 |
|
__________________
Jannetty Racing JRE Street Package
|
01-08-2012, 09:13 PM | #1273 |
Drives: 2013 ZL1 Join Date: Jan 2010
Location: Katy, TX
Posts: 199
|
Please update my time for bolt on's only catagory. Everything with the car is the same.
LS3,M6 Tires used: Mickey Thompson 295/45-17 drag radial performance mods: LT, Exhaust, CAI, PTB, UDP, Tune, Skinnies, DRs Catagory submitted for: BOLT ON'S ONLY R/T........... .255 60'............. 1.822 330'........... 4.933 660'........... 7.552 660’ mph... 94.85 1000'.......... 9.794 1320'.......... 11.699 1320’ mph… 118.48 Name of track: Royal Purple Raceway Date of Pass: January 6, 2012 Weather: 59* DA 368 |
01-08-2012, 10:10 PM | #1274 | |
INTHECLOUDS
Drives: 2010 2SS/RS Join Date: Aug 2009
Location: NM
Posts: 912
|
An 11.69 with a 1.82 60' Your trap speed is that of a camed car...
Quote:
__________________
2010 IOM 2SS/RS A6, Tuned by Me, ARH/NoCats, Borla Touring, Vararam CAI, G-Force 9" with 4.10's, Circle D 4500K, (Skinnies/Slicks, and Bogarts all around 24MPG
11.39 @ 118 510 DA www.6l80tuning.com www.6l90tuning.com |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet | Tran | Camaro ZL1 Forum - ZL1 Specific Topics | 42 | 12-22-2017 04:42 AM |
Modern Camaro Performance Parts - www.PartsTaxi.com | PartsTaxi.com | Sponsor Announcements / Giveaways / Contests | 0 | 10-06-2010 04:26 PM |
Official 1/4 Mile 2010 Camaro Stock Pirelli's Fast List | GQ4Life | Dragstrip and Launch Techniques Discussion | 17 | 07-07-2010 12:31 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |