Autobot Emblem question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sniper33 · 11-05-2011, 08:26 PM

I was thinking of getting 2 emblems for my car, but am unsure of the proper size. Ive seen some that look small but I've also seen other's that are way to large.

What is a good size for the emblems? The link are the ones I was thinking of getting.

http://www.ebay.com/itm/TRANSFORMERS...item3a52c45779

alini · 11-05-2011, 08:38 PM

You obviously are the only person who can answer this, if some seem to big for you dont use them, if they seem to small, dont use them. Find one you think is right.

Dizzy82 · 11-06-2011, 10:01 AM

I bought the oem ones. They are expensive, but are the best looking ones IMO.

Bluestreak 2010 · 11-06-2011, 10:42 AM

I purchased some of a similar style that are 3.75" x 3.75", which are somewhat larger than the OEM ones (I believe those are 3.25" x 3.25"). You can see how they size up in my signature. I'm not sure, but assume you are planning to put these on the fenders. If that is the case I would suggest something larger than the ones you provided the link to.

Another question is what color is you car? I found some colored emblems that I used on my engine cover that are available in 2" x 2" (on my cover) or 2.75" x 2.75" and are available in several colors. Its possible that you could get one in a color to compliment stripes or other accents on your car.

sniper33 · 11-06-2011, 11:25 AM

Quote:

Originally Posted by Bluestreak 2010

I purchased some of a similar style that are 3.75" x 3.75", which are somewhat larger than the OEM ones (I believe those are 3.25" x 3.25"). You can see how they size up in my signature. I'm not sure, but assume you are planning to put these on the fenders. If that is the case I would suggest something larger than the ones you provided the link to.

Another question is what color is you car? I found some colored emblems that I used on my engine cover that are available in 2" x 2" (on my cover) or 2.75" x 2.75" and are available in several colors. Its possible that you could get one in a color to compliment stripes or other accents on your car.

Yeah I wanna get them in under the Camaro emblem. I kinda figured the one's I linked would be on the small side. What are the oem ones, and what are those prices?

My car is solid black for now, wanna start adding things slow. And since these are the easiest i figured i would start here (then maybe cupholders).

Chaotic73 · 11-06-2011, 11:43 AM

These are the one's I got. I think they look the best of all the non oem one's.

http://cgi.ebay.com/ebaymotors/2-X-T...Q5fAccessories

And what they look like installed.

Chaotic73 · 11-06-2011, 11:48 AM

Also FYI the OEM one's will run you around $90 for just one.

Bluestreak 2010 · 11-06-2011, 12:42 PM

Quote:

Originally Posted by chaotic84

Also FYI the OEM one's will run you around $90 for just one.

Here is a picture of the OEM emblem, which are the ones used for the official Transformer Edition cars.

sniper33 · 11-06-2011, 04:24 PM

Thanks guys. I think Ill get the set Chaotic posted as they look about the right size and color/s. The OEM ones look great, but I'll have to pass on those for now.

KalCorp · 11-06-2011, 07:28 PM

Here is the one i found :-)

11-05-2011, 08:26 PM	#1
sniper33 Drives: 2011 Camaro SS Join Date: Jul 2011 Location: Indiana Posts: 11	Autobot Emblem question I was thinking of getting 2 emblems for my car, but am unsure of the proper size. Ive seen some that look small but I've also seen other's that are way to large. What is a good size for the emblems? The link are the ones I was thinking of getting. http://www.ebay.com/itm/TRANSFORMERS...item3a52c45779

11-05-2011, 08:38 PM	#2
alini Drives: 2016 Camaro Hyper Blue 2SS Join Date: Mar 2011 Location: Las Vegas Posts: 370 View My Garage	You obviously are the only person who can answer this, if some seem to big for you dont use them, if they seem to small, dont use them. Find one you think is right. __________________ The above post is by someone who is not an expert 2005 Pt Cruiser panel Conversion 2016 2SS Camaro Hyper Blue white interior 1937 Chevy truck. Full custom. Build in work https://www.teamalini.com

11-06-2011, 11:43 AM	#6
Chaotic73 BUMBLLB Drives: 2010 Camaro 1LT/RS Join Date: Jun 2010 Location: Yardville, NJ Posts: 1,772 View My Garage	These are the one's I got. I think they look the best of all the non oem one's. http://cgi.ebay.com/ebaymotors/2-X-T...Q5fAccessories And what they look like installed. Attached Images __________________

11-06-2011, 11:48 AM	#7
Chaotic73 BUMBLLB Drives: 2010 Camaro 1LT/RS Join Date: Jun 2010 Location: Yardville, NJ Posts: 1,772 View My Garage	Also FYI the OEM one's will run you around $90 for just one. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heritage Grille SS emblem, old skool	MR. FBDY	Camaro DIY & HOW-TO instructions & discussions	27	09-22-2013 10:27 AM
Emblem install question	TripleB	Camaro DIY & HOW-TO instructions & discussions	39	09-09-2010 11:06 PM
SS emblem on trunk	scythezo6	Cosmetics and Lighting Modification Discussions	9	03-09-2010 04:24 PM
EMBLEM QUESTION	ron10	Cosmetics and Lighting Modification Discussions	2	03-01-2010 11:37 AM
Painting SS emblem	scythezo6	Cosmetics and Lighting Modification Discussions	6	02-09-2010 08:32 PM

11-06-2011, 10:01 AM	#3
Dizzy82 Drives: 2011 1LT/RS A6 RJT SuperCharged Join Date: Mar 2011 Location: 87114 Posts: 3,503 View My Garage	I bought the oem ones. They are expensive, but are the best looking ones IMO.

11-06-2011, 10:42 AM	#4
Bluestreak 2010 Drives: IBM 2010 Camaro LS Join Date: Jun 2010 Location: Indianapolis, IN Posts: 1,686 View My Garage	I purchased some of a similar style that are 3.75" x 3.75", which are somewhat larger than the OEM ones (I believe those are 3.25" x 3.25"). You can see how they size up in my signature. I'm not sure, but assume you are planning to put these on the fenders. If that is the case I would suggest something larger than the ones you provided the link to. Another question is what color is you car? I found some colored emblems that I used on my engine cover that are available in 2" x 2" (on my cover) or 2.75" x 2.75" and are available in several colors. Its possible that you could get one in a color to compliment stripes or other accents on your car.

11-06-2011, 04:24 PM	#9
sniper33 Drives: 2011 Camaro SS Join Date: Jul 2011 Location: Indiana Posts: 11	Thanks guys. I think Ill get the set Chaotic posted as they look about the right size and color/s. The OEM ones look great, but I'll have to pass on those for now.

11-06-2011, 07:28 PM	#10
KalCorp Space Coast Camaros Drives: 2012 Camaro Vert Join Date: Sep 2011 Location: Palm Bay , FL Posts: 1,281	Here is the one i found :-)