12-05-2011, 10:42 PM | #1 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2009
Location: NY
Posts: 403
|
LPW Diff Cover - Axle seals now leaking - Need opinions...
Anyone with the latest version of the LPW diff cover have any issues? I had cover installed, vent is not leaking gear lube, but now both axle seals are leaking. Seals are new. 80w140 gear lube was used.
LPW told me that the thicker gear lube may be slowing the air from venting and possibly forcing oil out thru the seals but I just talked to another C5 member with the LPW cover that used 80w140 lube and has no leaks at all. Diff fluid at correct level... was not overfilled. One idea was to remove the 0.070" restricter from the brass fitting on cover. I'm going to change fluid to 75w90 and see if there is any change. Any of you smart guys have any ideas? Last edited by MJ; 01-16-2012 at 02:46 PM. |
12-07-2011, 12:15 AM | #2 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
You should be able to remove diff cover without removing diff. Have to drain it first though.
__________________
|
01-16-2012, 02:52 PM | #3 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2009
Location: NY
Posts: 403
|
Restricter removed, 75w90 used. There was an improvement but one side still leaks. Will replace the OEM equivalent with genuine GM seal to see if it makes a difference.
|
01-17-2012, 11:53 AM | #4 |
Emerald Coast Camaros
Drives: 2010 2SS 6m Join Date: Mar 2010
Location: Fort Walton Beach...surrounded by da** pickup trucks I can't see around!
Posts: 692
|
It's super easy to dork up those axle seals.
__________________
Procharged F1A-94 on a 416 LSA block, Callies/Manley/Scat/Melling/Cloyes/ARP/Ferrea/Landspeed/Hi-Ram/FIC/Tick/Alky/ Strange/QA1/DSS/BMR/RPS/Tilton/GZM/Fore/AEM/ATi/JGS etc., built/tuned by me and Innovative Street Technologies
'Mo's Seemingly Endless Build Thread |
02-14-2012, 07:22 PM | #5 |
Drives: white with orange stripes 2SS/RS Join Date: May 2010
Location: Antioch Ca
Posts: 71
|
I'm curious as to what you have done to repair this problem. I too have a LPW cover and also have had leakage issues from seals and vent too.
|
02-15-2012, 12:03 AM | #6 |
Damn I just ordered a diff cover from these guys...
__________________
B-Rex 2011 2SS/RS LS3 Hurst, LG, C.A.I., Flowmaster, Pfadt, Pedders, U.S. Gear/Axle Tech, LPW, SJM, Nitto, Nitrous Outlet, ZEX |
|
02-16-2012, 07:33 PM | #7 |
Emerald Coast Camaros
Drives: 2010 2SS 6m Join Date: Mar 2010
Location: Fort Walton Beach...surrounded by da** pickup trucks I can't see around!
Posts: 692
|
As in all things on an internet forum, when things go right, hardly anyone posts, but god forbid something go wrong and it's the end of the freakin' world.
__________________
Procharged F1A-94 on a 416 LSA block, Callies/Manley/Scat/Melling/Cloyes/ARP/Ferrea/Landspeed/Hi-Ram/FIC/Tick/Alky/ Strange/QA1/DSS/BMR/RPS/Tilton/GZM/Fore/AEM/ATi/JGS etc., built/tuned by me and Innovative Street Technologies
'Mo's Seemingly Endless Build Thread |
02-18-2012, 06:21 PM | #8 |
I hope to have it.installed around the first.weekend of march. I'll take care and do it right and post.my.results
__________________
B-Rex 2011 2SS/RS LS3 Hurst, LG, C.A.I., Flowmaster, Pfadt, Pedders, U.S. Gear/Axle Tech, LPW, SJM, Nitto, Nitrous Outlet, ZEX |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SS bumper cover installed on my 2LT/RS | 01pewterz28 | Cosmetics and Lighting Modification Discussions | 60 | 01-15-2015 03:57 PM |
Engine cover MOD | d69chris | Camaro DIY & HOW-TO instructions & discussions | 50 | 01-11-2013 01:17 AM |
Cat back vs axle back from gmpp. What's the diff? | KIZE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 7 | 08-04-2011 06:31 PM |
New Camaro 4130 and 300m Axle packages coming soon | GFORCE1320 | Transmission / Driveline | 4 | 01-16-2010 04:21 PM |
Engine cover MOD | d69chris | Cosmetics and Lighting Modification Discussions | 33 | 09-16-2009 10:02 AM |