You are browsing camaro5 
 |
|
11-17-2011, 06:37 PM
|
#1 |
|
Hasbin of Stock Bottom HP
|
Just put the VMAX TB on
Just got done throwing on the new throttle body. I was kinda skeptical at first if it would really make a difference. It was probably the easiest mod i've ever done. Just the 4 bolts and off and new one on. No CEL. Done.
Figured I would take it for a spin, went to pull out of my driveway, started easing out the clutch and man it just started spinning the tires  . I'm pretty impressed for a simple bolt on its add one of the most noticeable improvements. VMAX = 
|
|
|
|
11-17-2011, 06:44 PM
|
#2 |
|
***GO HOGS GO***
Drives: 68/327 & 10 2SS SIM w/ CGM Stripes Join Date: Jun 2010
Location: NW Arkansas
Posts: 1,796
|
 Yea its one of the best mods for the money you can get.
__________________
ProCharger F1A, ID1000 Injectors, SW Headers, SW full 3" Exhaust, BMR Suspension, CCW 10"/11.5", DBA Rotors, 3.91's, 560/570 hp/tq
 ProCharger F1A, VMax TB, ID1000 Injectors, SW Headers, SW full 3" Exhaust, BMR Suspension & 4 Point Strut Tower Brace, 3.91 Gears, DBA Rotors Heritage Grille, CCW SP16a Wheels 10"/11.5" Nitto 275/40 315/35, Painted Calipers, Blackout: Bowtie, Rear Panel, Markers & Side Vents, SS Fender Badges, 6.2L Cowl Lettering, Pistol Grip Shifter, RPI SS Door Kick Plates, Billet Cup Holder, Fesler Shift Boot, Lloyd Floor Mats..(1/4: 12.917 @ 109.63) |
|
|
|
|
11-17-2011, 06:46 PM
|
#3 |
|
Emerald Coast Camaros
Drives: '12 2SS/RS LS3 GBA Join Date: Sep 2011
Location: PanamaCityBeach,Florida
Posts: 1,375
|
Can't wait for them to get the 2012 v6 worked out!
__________________
 Muffler Delete, Cold Air Inductions intake, Technostalgia Sequential LED Tail Lights, Vmax CNC Ported TB, RX Catch Can, AAC LED Interior Lights (Aqua) |
|
|
|
|
11-17-2011, 07:18 PM
|
#4 |
 
Drives: 2000 Camaro SS + 2010 Camaro SS Join Date: Jul 2010
Location: San Marcos, TX
Posts: 270
|
not to familar with the pricing on these. it says something about a core charge how does this work? do u send them ur part for the one they carry? how much does it actually cost? thx james
|
|
|
|
|
11-17-2011, 07:26 PM
|
#5 | |
 
|
Quote:
150 bucks and they send you a ported TB. Once you get theirs you take yours off and send back. I think the core charge is 150 dollars? I can't recall. The core charge is usually credited the day he receives your TB back. SC2150 is very easy to deal with
|
|
|
|
|
|
11-17-2011, 08:11 PM
|
#6 | |
|
Slow Turtle
Drives: 2011 1SS Join Date: Jun 2011
Location: Manhattan, KS
Posts: 1,123
 |
Quote:
|
|
|
|
|
|
11-17-2011, 08:19 PM
|
#7 | |
|
Hasbin of Stock Bottom HP
|
Quote:
|
|
|
|
|
|
11-17-2011, 08:20 PM
|
#8 | |
|
Hasbin of Stock Bottom HP
|
Quote:
|
|
|
|
|
|
11-17-2011, 08:29 PM
|
#9 |
|
Account Suspended
Join Date: Jul 2009
Location: Indianapolis, IN
Posts: 592
|
Glad you got your TB VanquisherSS and like it so far.
The normal cost is $149 for the TB, $15 for shipping and a $200 refundable core fee. In this case is a new TB which carries a $50 upcharge. Thanks. Mike Norris |
|
|
|
|
11-17-2011, 08:45 PM
|
#10 |
   Drives: 2010 Camaro L99 Join Date: Oct 2009
Location: Erie PA
Posts: 1,226
|
Is the number on the Vmax TB how many where ported?
__________________
2010 L99
vararam intake, Vmax TB,Vmax Intake,TSP VVT 3 Cam,TSP underdrive pulley,Yank 3600,TM Cooler,ARH 2", High Flow cats, X-pipe, GM Pro mufflers, RX Catch Can,160 stat, BMR Trailing,toe,Cradle insert, Diff. Bushings, End links, Spohn-LCA's (Touring)Wheel spacer's. 422 rwhp Mustang Dyno http://www.youtube.com/watch?v=AaFNAhCL7Os Last edited by siriusdish; 11-17-2011 at 10:01 PM. |
|
|
|
|
11-17-2011, 10:44 PM
|
#11 |
 
Drives: 2010 Camaro 2SS/RS Join Date: Jul 2011
Location: Upper Marlboro, MD
Posts: 171
|
First mod I did to my car, and I couldn't be happier.
|
|
|
|
|
11-18-2011, 06:53 AM
|
#12 | |
|
Account Suspended
Join Date: Jul 2009
Location: Indianapolis, IN
Posts: 592
|
Quote:
Mike Norris |
|
|
|
|
|
11-18-2011, 07:26 AM
|
#13 | |
|
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Quote:
 
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
|
|
|
|
|
11-18-2011, 08:00 AM
|
#14 | |
Drives: 2012 45th anniv. Convertible SS LS3 Join Date: Oct 2011
Location: Riverside, CA
Posts: 321
|
So that I am clear on this, its 200 for the new TB, plus 15 shipping, plus 200 for core which will get reimbursed once my old one gets sent to you? Making it in reality 415 for a new ported TB till you send in your old one, but if you wanted to keep your own its 415 bucks. Why not have a local shop port it out? Just trying to make sense of it all as I am having 3500 bucks worth of goodies put on my baby, and the TB was something I have been debating for the last month or so.
Thanks Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ****** VMAX Velocity Ring for the FAST 102MM Intake ******* | DREV LSX | V8 Bolt-Ons & Tunes | 10 | 03-08-2012 03:55 PM |
| UNOFFICIAL CAUSE OF TRANNY OUT PUT SHAFT ISSUE | orangeinfernoman | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 38 | 04-25-2011 08:25 PM |
| VMax CNC Throttle Body Dyno Test Data | Mike Norris | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 8 | 01-15-2011 08:28 AM |
| Norris Motorsports VMax CNC TB Testing Results - Free Shipping for C5 Forum Members | Mike Norris | V8 Bolt-Ons & Tunes | 27 | 11-01-2010 06:37 PM |
| Put my blackouts (Black10) on and Painted the bezels. Black bowties too. | LosingReality | Cosmetics and Lighting Modification Discussions | 8 | 04-30-2010 03:43 PM |
