08-18-2009, 10:14 AM | #1 |
|
Who All is thinking of getting ADM CAI?
I am really thinking of getting this one from Andy. I like that the MAF is actually inside the box and right behind the filter.
What are others thoughts on this intake? I just sold some ads for my website and it will cover getting something like this for the car. I was thinking of the Varamm or how ever you spell it one but the GM engineers said moving the raditior good by warranty for sure. Let me know your thoughts!! Thanks Scott PS We go to the radiation doctor tomorrow for Steph. He will have all the results of the test ran yesterday on her and will give us the game plan. Good thing is he and this hospital take our insurance where the other one did not on alot of stuff. |
08-18-2009, 10:23 AM | #2 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
I'll be praying for good news for your family.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
08-18-2009, 10:26 AM | #3 |
Dances With Mustangs
|
Interesting info about the warranty and moving the radiator. For me it's a toss-up between the Vara and ADM's. I'm waiting to see the final results and price. Theoretically the Vara has more potential, but the guys at ADM seem to be quite talented and skilled at working with performance and I liked what I've seen so far; a lot.
If all else is equal, the warranty issue would be the decider for me. Was it the GM team that came down to check your car that told you that? Oh yes and I did in fact put in some prayers for Steph.
__________________
Blue Angel is here!! 1SS/RS LS3 M6 IBM |
08-18-2009, 10:28 AM | #4 |
Drives: Wild Cherry Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
|
I will be getting the one from ADM in the next week or so..........
__________________
2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS |
08-18-2009, 10:29 AM | #5 |
Danny
|
Waiting on Vararam to compare.
__________________
2SS/RS CGM with black rally stripes
DON_RAFA describing my Noweeds cutouts - "Very Strong. When I couldn't see you I still heard you. Sounds like your car is pissed at the world." |
08-18-2009, 11:10 AM | #6 |
Drives: 2020 ZLE 67 SS350 Join Date: Jul 2008
Location: Kentucky
Posts: 537
|
Won't moving the MAF cause bad readings?
|
08-18-2009, 11:26 AM | #7 | |
|
Quote:
|
|
08-18-2009, 11:31 AM | #8 |
Drives: 2015 SS L99 Join Date: Aug 2009
Location: Sarasota FL
Posts: 67
|
I will be building rpepka's car and we got all his parts from andy at adm he is probably the nicest and easyest guy to work with if talk to him on the phone he talks to you like a human not a 2yr old i would encourage every one to buy from adm his stuff is made with quality and looks in mind he is great and im sure his cai will be one of the best on the market!!!!
|
08-18-2009, 03:12 PM | #9 |
Rice Cooker
Drives: Avalanche Z/71, 2010 Camaro2SS Join Date: Jun 2008
Location: Hawaii/Phoenix
Posts: 591
|
What you talking bout?! Already ordered my ADM CAI, hopefuly they ship them out this week. Nothing seems to come close in design and build quality. Quite genious on there part for placing the MAF where they did.....cant wait to install it.
|
08-18-2009, 03:26 PM | #10 |
Drives: Black 2010 1SS RS, Join Date: Jul 2009
Location: Edgewood, NM
Posts: 52
|
Will have to do a comparison with Vararam. Don't care much about warranty issue, as I doubt my dealer will give me grief. I like the looks of the ADM more and if the performance and price is close, I will choose the ADM rather than the hassle of installing the Square-pants butt look.
PS: I will say a prayer for Stephanie |
08-18-2009, 04:04 PM | #11 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
As of now I would go ADM for sure.
I haven't seen the price but I would bet it will be within reason of the others. I like the design of having the MAF in the box and I know Andy knows his stuff. It's even better for me because his shop is only about 15 min from me. I'm sure I'll be doing most my performance stuff with him. I think LMR would be a good second choice. But I don't think LMR's current design will be able to touch ADM's race CAI since there will be a scoop to make it more of a RAM Air type CAI. It would be nice to do a dyno comparison between all three...LMR, ADM street, and ADM race. Whoever gets their ADM installed first please post some pics. Preferrable pics or video during the whole install.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
08-18-2009, 04:10 PM | #12 |
Okie doke
|
ADM all the way here .. .. As of yesterday, here was my car from him:
__________________
|
08-18-2009, 04:19 PM | #13 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
SWEETNESS......
Can't wait to see this finished project. Surely you'll be putting on Andy's CAI. When that things done you need to take it up to the Denton track and get some good time slips. Let me know if you go and I'll bring a video camera! BTW: I'm assuming the lighting is jacking with the color on your car but isn't yours an SIM? Looks like some kind of teal or something in the pic. Edit: NM...I see it's some kind of protection plastic he put around your car.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
08-18-2009, 06:30 PM | #14 |
Drives: 2010 SS & 2008 C6 Join Date: Mar 2008
Location: VA
Posts: 1,819
|
Weighing this one vs the Vararam. Depends on final numbers, price and what will work or not work w/ the upcoming Whipplecharger. I don`t mind changing the connection tubing or modifying said tubing, but one of these might not work at all.
__________________
2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter.
Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list.. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ADM Performance Stage 1 Cam/Downpipes package | ADM PERFORMANCE | V8 Bolt-Ons & Tunes | 19 | 09-21-2009 08:08 PM |
CAI Comparison at LMR Dyno day | mlee | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 41 | 08-17-2009 10:31 PM |
CAI question | Rob53 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 7 | 08-03-2009 12:08 PM |
"Resetting" the MAF vs. CAI install ... where's the hp coming from? | LS 1st gen | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 4 | 07-03-2009 08:42 AM |
LS3 goes 11`s Bonestock! | GMRULZ | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 28 | 12-08-2008 09:10 PM |