12-08-2011, 08:54 AM | #1 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
Harrop HTV1900 $4,000
Complete kit but tune would be needed. . . . Installed on my Coupe in October of 2010 and taken off last month . . . Made 520 rw and 494 rw trq. Had all work done by Race Proven Motor Sports where it now sits ready to ship out. I bought this kit instead of the Maggie 2300 because I wanted a kit that would get me over 500 rw without headers . . . . I had been on the mod train a long time and wanted something that would be reliable and not hard on the head . . . .it gave me exactly what I asked for and now I am looking for more power again on a new SS Vert I just scored.
This kit is great if you are not looking for more than 600 or so rw hp . . . .I ran it with a solo catback and no headers and was on 7.7 lbs of boost and got 520 rw . . . .I did need to dyno tune it to get there. If you want bigger numbers this kit is not for you. The 1900 has great power down low and is set up to run on a fairly stock SS . . .if you did add headers and changed the pulley for 10-12 lbs of boost you would be in the 600 range . . .I am guessing you would be working it at anything over 700 but I do not know. The kit has approx 3,000 miles on it and is in very good condition. Fran the owner of Race Proven Motorsports can answer any tech questions about the blower or verify the condition of it. I can get more pictures upon req. Kit includes Roto-Fab cold air intake and Kenne Bell boost-a-pump and upgrades for 8lb boost set up. It is ready to install and Fran can provide a temp tune if needed. My cost new was $7,500.00. Have all receipts and records. So $4k and split shipping . . . . .I am in Delaware 19804. You can contact me at dcrowley@pettinaro.com or call Fran at Race Proven Motor Sports 302-798-4000 Pics In the next post . . . .do a search on Harrop . . .some good info on the blower and a lot about a bad vendor So in summary this is a kit for someone that wants a bolt on set it and forget it blower . . .staying close to stock and has no bigger plans in mind . . .in that setting the kit is perfect. It is an LS3 set up but can work on an auto Thanks DC
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
12-08-2011, 09:13 AM | #2 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
Pics large
A few pics . . . .
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
12-08-2011, 02:07 PM | #3 |
Don't Like it? Suggit.
|
DAMMIIIIT, why iz I alwayz da brokes???
This is just what I'm looking for. Sweet kit man, bump.
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
12-09-2011, 06:54 PM | #4 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
sell the rotofab intake separately?
__________________
|
12-09-2011, 07:12 PM | #5 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
No thanks . . . will sell as a complete kit.
DC
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
12-09-2011, 07:37 PM | #6 |
雪の玉
Drives: '22 Z71 RST Silverado Join Date: Feb 2011
Location: South
Posts: 3,415
|
|
12-09-2011, 08:27 PM | #7 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
Can't blame you.. Just thought I would check. Good luck with sale.
__________________
|
12-10-2011, 08:50 PM | #8 |
Drives: Florida Speed & Power Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,185
|
Any pics of it installed on the car?
|
12-12-2011, 12:39 PM | #9 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
Sorry . . . no pics of the Harrop on the car . . .never got around to it . . .I can provide more pics of the kit off the car if any one wants em . . . .shoot me an e-mail at dcrowley@pettinaro.com
DC
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
12-15-2011, 01:39 PM | #10 |
Drives: 2010 2SS/RS LS3-M6 Join Date: Nov 2009
Location: Standish, Maine
Posts: 135
|
do you have the install manuals for it? All belts and relocation hoses are included? New properly sized fuel injectors?Another words, everything needed except the tune?
__________________
Currently:
2010 CGM 2SS/RS GFX LS3-M6, 3.91 1LE diff, Kooks LTH w/ cats, Borla Touring axel back, CAI intake with race scoop, and custom dyno tune Previously: 2010 IBM 2SS LS3-M6 CAI intake with JRE race scoop, VMax TB, Solo HF Catted Mid pipes, and JRE SCT tune |
12-17-2011, 02:13 PM | #11 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
mtbikerinme83:
Install manuals are long gone as I never used em . . .I had Race Proven Motorsports put the kit on . . .I can look for em but did not keep em with the recpts . . .all belts and hoses are included . . .injectors are not new as I paid for the upgrades when I bought the kit . . .so I never used the 6lb pulley or the injectors that came with . . .I traded out before the kit was shipped and paid for the bigger pulley and the bigger injectors . . . .60lbs I believe . . . it is a complete kit . . . I do have SCT tuner I will throw in . . .Race Proven may be able to throw my tune on there . . . but I believe the tuner is tied to the vin . . so there maybe a fee involved in sending it back to have it wiped . . . Everything you need . . . .complete kit except the tune you can call Fran at RPM with any questions . . .302-798-4000 Thanks DC
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
12-19-2011, 08:44 PM | #12 |
Drives: 2009.5 G8 GT Join Date: Jun 2011
Location: Hilliard Ohio
Posts: 39
|
Harrop
Any hope that this would fit on a G8 GT?
|
12-20-2011, 07:33 AM | #13 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
G8RAM:
I will check with Fran at RPM . . . . .not sure . . . .would need to be 100% on it. Thanks DC
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
12-20-2011, 08:43 AM | #14 |
Drives: 2017 Camaro ZL1 Coupe Join Date: Dec 2009
Location: Wilmington, Delaware
Posts: 49
|
G8RAM:
http://www.harrop.com.au/pdf/install...tion_Guide.pdf Above link shows an install on a G8. . . . . . Harrop does the kit on the G8 as it was out before the Camaro . . .the G8's kit is called the Black Series . . not sure what you would need to get form them in the way of parts to make my Camaro kit work on your car . . .it would work . . .I just do not know how much of a PITA it would be. Fran said his shop could make it work . . .but we are in Delaware . . . .he has an ace LS tuner, Roshan . . .Roshan is very good . . . they even put a blower on my wrangler 4 door. Ottperformance does sell the Harrop and their kits for the Camaro are around $5,500 . . . .mine was a lot more and had the upgrades so I got worked at $7,500 . . . call Ott as it may be worth your time to buy new or you can ask them what you would need if you were going to use it on a G8 . . .either way it should help you decide the best path. Answer is it would work but you would need to figure in . . . .if the search for parts and the used kit were worth the savings vs. buying new. I really like the G8's and sold Fran's brother my polished SS rims for his G8 . . .they really look good . .I was going for a G8 and was going to do a project but got side tracked on another car. . Good luck with yours. DC
__________________
2018 ZL1 Vert 6spd man, 2020 R8 Perf, 2005 S4 Cab 6spd man, 2003 RS6, 2019 850i Vert, 2015 M6 GC 6spd man, 2019 Rubicon Unlimited 6.4 Hemi, 2016 Yukion Denali XL
"When parts exceed the whole.....you have Mod Fever!" |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Latest HTV1900 Harrop supercharger - pics inside!! | Mister HP | Forced Induction - V8 | 126 | 09-01-2010 06:40 AM |
HArrop HTV1900 kits in stock and shipping!! | Mister HP | Forced Induction | 14 | 06-02-2010 10:11 AM |
Harrop HTV1900 dyno video | Mister HP | Forced Induction - V8 | 12 | 01-25-2010 09:40 AM |
Press Release: Harrop HTV1900 S/C Kit for 2010 Camaro | katy@lmspeed | Forced Induction | 7 | 11-17-2009 05:32 PM |