Anyone with a Good DIY for Replacing Front Seat Covers? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro21 · 07-20-2012, 10:37 AM

I have already replaced the rear seat covers and looking for a good DIY for the Front Seat Covers?

How to remove the side plastic cover for power seat switch?

Any warnings (other than airbag)?

Any help would be appreciated !!

StangKiller-SS · 07-24-2012, 11:30 AM

Take your time and scope out how it's all installed. The plastic trim has screws on the back side, then I believe you have to remove the power seat button cover, then there's a couple of clips that hold the panel in, and I believe there may be one more step after that but really can't remember what it is.

Camaro21 · 07-24-2012, 11:33 AM

Quote:

Originally Posted by StangKiller-SS

Take your time and scope out how it's all installed. The plastic trim has screws on the back side, then I believe you have to remove the power seat button cover, then there's a couple of clips that hold the panel in, and I believe there may be one more step after that but really can't remember what it is.

Thanks for your response. Once I removed the seat, I figured it out. It's really pretty easy, just a little time consuming !!

BowtieBelle · 07-29-2012, 10:59 AM

http://www.camaro5.com/forums/showthread.php?t=190139

I did it. Time consuming and painful but worth it!

07-20-2012, 10:37 AM	#1
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,041 View My Garage	Anyone with a Good DIY for Replacing Front Seat Covers? I have already replaced the rear seat covers and looking for a good DIY for the Front Seat Covers? How to remove the side plastic cover for power seat switch? Any warnings (other than airbag)? Any help would be appreciated !!

07-29-2012, 10:59 AM	#4
BowtieBelle They see me trollin'... Drives: 217 ci of fury; Chauffeured by SS Join Date: Jul 2011 Location: Oklahoma Posts: 13,876 View My Garage	http://www.camaro5.com/forums/showthread.php?t=190139 I did it. Time consuming and painful but worth it! __________________ "Never race anything you can't afford to light on fire and push off a cliff." -CamaroSpike 2011 Custom LT/RS: Bella's Build Thread

07-24-2012, 11:30 AM	#2
StangKiller-SS Drives: GM products Join Date: Apr 2009 Location: USA Posts: 1,621	Take your time and scope out how it's all installed. The plastic trim has screws on the back side, then I believe you have to remove the power seat button cover, then there's a couple of clips that hold the panel in, and I believe there may be one more step after that but really can't remember what it is.