Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 09-06-2010, 03:51 PM   #1
TornadoSS
WICKDSS
 
TornadoSS's Avatar
 
Drives: 2011 1SS/RS IOM LS3
Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
ARH 1 7/8 Headers and Pipeline CAI installed

Finally completed the install of the ARH 1 7/8" headers with high flow cats and Fastlane Pipeline intake and was able to get the SCT Fastlane email tune downloaded to it today.

Install on the headers was about 3 1/2 hrs without a helper, and I might mention that I had the car over 16" off the floor and had to remove the steering column at the joint to get the drivers side header in. Ground clearance is as good as stock system. The mild drone that the Borla ATAK had around 1800 - 2000 rpm is actually quieter now with the headers. In cabin sound is good even with the ATAK and headers. Normal conversations and phone calls can be had, no problem. In my opinion, this exhaust combination is not as obnoxious as some people have claimed, its actually pretty early morning and neighbor friendly. Hard throttle and WOT it really screams! But that is just my opinion. The header install is straight forward and crazy easy compared to other cars I have put headers on!

The Pipeline intake install had no issues, just have to remove the stock washer fluid tank, replace it with the supplied 3 pint tank and relocate the original washer pump motor to the mount bracket, as seen in pics.

Big thanks to Dan at Fastlane for working so hard through the weekend to get me the correct tune for this setup!!! Thanks Dan and guys at Fastlane!!! The tune and intake are working well.







__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei
11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds.

Last edited by TornadoSS; 09-06-2010 at 04:52 PM.
TornadoSS is offline   Reply With Quote
Old 09-07-2010, 09:49 AM   #2
Anthony@ARH
 
Drives: Black s2000, 749 ducati dark
Join Date: Jul 2009
Location: NY
Posts: 110
Looks great! Happy motoring!
Anthony@ARH is offline   Reply With Quote
 
Reply

Tags
2011, arh, borla atak, fastlane pipeline cai

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
V8 Camaro Aftermarket Exhaust Video Clips Compilation tjbusa Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 591 07-06-2022 08:38 AM
V8 Camaro Performance Upgrades List Milk 1027 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 93 08-30-2021 05:56 PM
Check Engine light on after ARH and Pipeline CAI installed se7en Tuning / Diagnostics -- engine and transmission 17 03-10-2010 08:06 AM


All times are GMT -5. The time now is 04:11 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.