New Convertible Windrestrictor

[GPC1]

Grabiak Performance Center is pleased to announce the arrival of the Windrestrictor for the Camaro Convertible!



The Windrestrictor® is the very first product in the world to have all of these amazing features below...

Features
•Can remain in place/ looks great with top up or down
•Does not interfere with top movement/ no need to remove at all
•Very strong and rigid mounting system
•Powder coated stainless steel brackets
•No drilling required or permanent modification at all
•3D glass design to enable full seat travel
•Real laser etched Camaro graphics available
•Elegant illumination system available with multiple color options
•Remote control lighting and dimming options available
•Brake lamp hook up, running light hook up or battery power


Benefits
•Significantly reduce rear wind turbulence inside your Camaro Convertible
•Maintain cabin temperature while driving with the top down
•Enjoy conversation without raising your voices
•Better sound clarity from stereo with reduced wind turbulence
•Personalize and set your Camaro apart from the rest
•Additional rear lighting for added safety on the road
•Passengers can talk more clearly on cell phone








-------- ADDITIONAL OPTIONS ARE AVAILABLE: --------




LED COLOR OPTIONS:





DIMMER OPTION:

This is a new module that we have released called the Dimmer Module. It allows you to control the intensity of the Windrestrictor's illumination at any given time. This module also has a built in on/off switch that allows you to easily turn off all lighting to the unit whenever you like. This module is a perfect addition to our brand new extreme lighting kit for the Windrestrictor.

BRAKE LIGHT MODULE:


This option is a very nice option. It's a module that you can install in your console "waterfall compartment" or in your trunk on your rear panel. It has 2 knobs on it. After installed the first knob will control the Running light intensity to your product. You can use this knob as a dimmer knob to adjust the illumination while you are driving with your running lights on or headlights on. The other knob controls the brake light intensity to the product. You can adjust this knob if you want the product to illuminate when you apply pressure to your brakes.

With this option you can set the product for the following:

•Restrictor can be set to come on only with the head lights,
•Restrictor can be set to come on only with the brake lights,
•Restrictor can be set to produce a certain illumination while driving (like a mid-intensity) and then produce a brighter glow when you apply pressure to your brakes when you stop. Kind of like a 3rd brake light option.
•Also, this module will allow you to turn off product all together if you want. If you did not want it on for some reason, then you could turn both knobs down and then you'll just have the laser etching.
Finally, our new brake light module come with a built in battery pack (9V). So just flip the toggle switch and you can have the restrictor illuminate at the intensity you desire even when the car is off. (good for car shows). So this is a wonderful option that allows you to tap into your running lights and your brake lights simultaneously, and adjust each independently.


--------------------------------------------------------------------------------
•Some benefits of the Illuminated Wind Restrictor™...
•1. Eliminate most wind turbulence and wind noise
•2. Personalize your roadster with illuminated graphics
•3. Advertise your business with an etched logo
•4. Can be wired to brake lamps, fog lamps etc.
•5. Prevent unrelenting wind buffeting and driver fatigue
•6. Carry on conversations with your passenger without raising your voice
•7. Arrive with your hair in place and free of tangles, especially long hair
•8. Enjoy more of the full richness and clarity of your stereo
•9. Help maintain the temperature in your roadster when top is down
•10. Each order includes spray cleaner, cotton gloves or other accessories The only wind deflecting device to have all these features...
•*Made from double-sided AR Polycarbonate. (Very durable acrylic type material is also scratch resistant! Others are made out of much cheaper materials and dangerously breakable plastics. Some may be made out of Lexan; the disadvantage to Lexan is that it scratches easily and won't emit illumination, It may also discolor with etching.)
•*Professionally precisely designed and laser cut. (Others are produced at home using table routers and jigsaws leaving rough edges and defective shapes. Wind Restrictors™ are professionally produced from the finest materials using state-of-the-art equipment.)
•*Can order with ILLUMINATION. (The only wind deflecting device on the market that has this patent pending feature! You can have the Wind Restrictor™ Light Kit hard wired to any 12 volt wire of your roadster, e.g. fog lamps, brake lights, driving lights, etc. Most car audio/electronic shops or dealerships can wire it or you can do it your self in less than 1 hour. A cigarette lighter plug adapter or AAA battery pack can be added for an easy, convenient connection.)
•*Can order Laser engraving. (Etched with a high powered laser to really make your roadster unique and stand out. The engraving will also emit light and give off an awesome glowing effect with a Light Kit installed. personalize your roadster with a custom logo or stock graphics.)
•*PERFECTLY formed to the contours of your roadster. (Others are not designed and manufactured to exactly fit the bodylines or roll bars on your roadster.)
•*Attaches to your roadster without permanent alteration or tacky fixtures. (No drilling of holes, adhesive tape, Velcro or straps.)
•*Extremely smooth crystal-clear edges. (Others are sometimes sharp and ridged, ours are laser cut smooth to perfection then flame polished so that the Wind Restrictor™ looks and feels like a million bucks as well as emitting illumination to the fullest.)
•*Installation easy as 1,2,3! (1.- Remove 2-4 screws from your rear panel; 2.- Mount the Wind Restrictor™ into place; 3.- Put extended screw connectors back in place! takes about 5-8 minutes.) NOTE: This Product will ship directly from the Manufacturer - Flat Shipping Rate of $25 Applies.
Pricing:
Clear Non Engraved $303
Laser Engraved $341
Laser Engraved and Illuminated $379

Accessories:
Dimmer Control Switch +$33
Extreme Lighting Kit with Remote +$122
Brake Light Module +$94
12 Volt Power Plug +$6
Push Button On/Off Switch +$4
Battery Pack +$13

Feel free to give us a call at (866)713-0162, email us at gpc@grabiak.com or send us a PM with any questions!

[GPC1]

http://www.gpcperformance.com/Camaro...p/camwr100.htm

[GPC1]

Just a reminder, we are a Windrestrictor authorized dealer and distributor. Any questions or info, please let us know

[pnyklr]

How does this affect visibility out the rear window?

-Funk

[GPC1]

How does this affect visibility out the rear window?

It's more or less like having a decal on your back window