04-30-2013, 05:29 PM | #1 |
Account Suspended
Drives: 2013 Camaro 1SS/1LE Join Date: Feb 2013
Location: Waterloo
Posts: 609
|
2014 Hood on 2013
So Im a big fan of the Black Wrapped 1LE hood of the 2014, does anyone know of the hoods are the same shape? would like to get one for my 2013 1LE.
|
04-30-2013, 05:33 PM | #2 |
SoCal Mayhem
Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008
Location: Foothill Ranch, CA
Posts: 5,488
|
Is the width of the cowl on the 2014 SS hood wider than the 2010-2013?
__________________
|
04-30-2013, 05:49 PM | #3 |
Drives: 2010 Camaro SS Join Date: Jul 2009
Location: Bossier City, LA
Posts: 160
|
the 2014 ZL1 is the same hood/front end/headlamps as the 2013... I want to say yes, but we may not know they hit production.
__________________
|
04-30-2013, 06:00 PM | #4 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Fbod said the hoods would be interchangeable.
|
04-30-2013, 07:17 PM | #5 |
SoCal Mayhem
Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008
Location: Foothill Ranch, CA
Posts: 5,488
|
If you look at this comparison picture, the cowl does look wider on the 2014 SS which means the cowl lines on the 2010-2013 front fascia won't line up.
But I guess you could always do body work to get rid of the lines like the people who do the ZL1 front fascia swap
__________________
|
04-30-2013, 09:31 PM | #6 | |
Camaro King [^*^*^]
Drives: Apollo 11 Camaro IOM Join Date: Dec 2009
Location: CA
Posts: 1,754
|
Quote:
__________________
|
|
05-02-2013, 03:14 PM | #7 |
Account Suspended
Drives: 2013 Camaro 1SS/1LE Join Date: Feb 2013
Location: Waterloo
Posts: 609
|
I may just try to get the Extractor piece and then mold it my hood.
|
05-02-2013, 03:20 PM | #8 |
|
Gotta admit, I agree with ya.
__________________
|
05-02-2013, 05:21 PM | #9 |
Account Suspended
Drives: 2013 Camaro 1SS/1LE Join Date: Feb 2013
Location: Waterloo
Posts: 609
|
Ya I like the look of the 2013 over the 2014 by miles.
|
05-02-2013, 08:21 PM | #10 |
Beast Rider
|
I don't like the air vent used for the extractor. I could live with just about all the rest, but would have to replace that vent with the TL1 from ACS or buy a stock ZL1 hood no extractor and buy ACS composites ZL1 insert. Before you ask; that would save about $2000.00 over a stock GM ZL1 setup hood and extractor.
__________________
"Just looking fast is sometimes all it takes!!!"
|
|
|
|
|