Stainless Works HF cats $100 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

11syn3rgy · 03-27-2015, 05:50 PM

Hey guys,

I just decided to remove my SW high-flow cats. I've only had them on my Camaro for about 7-8K miles and they are in perfect condition. To be honest, I thought they might be in tough shape since I'm supercharged, but I guess it's true what they say, it's all in the tune. I'm running about 9 psi on my L99 Camaro and I have been very impressed with SW quality. I have their LT headers as well. Good stuff. Lemme know if anyone is interested? $100 plus shipping seems fair from what I've seen them go for.

Thanks!
John

LTRS777 · 03-27-2015, 06:42 PM

See through photos?

11syn3rgy · 03-27-2015, 10:15 PM

Here you go...

11syn3rgy · 03-27-2015, 10:16 PM

Another one...

11syn3rgy · 03-27-2015, 10:20 PM

Last one....

LTRS777 · 03-27-2015, 10:49 PM

Do you know inlet/outlet size? Ty. Why do you think they are in bad shape?

11syn3rgy · 03-27-2015, 10:56 PM

Quote:

Originally Posted by LTRS777

Do you know inlet/outlet size? Ty. Why do you think they are in bad shape?

They will slip right over your stock exhaust on the outlet (rear) side. I have SW long tube headers that they slip right over. They were clamped on, not welded. They are in perfect condition. I just thought they might be in rough shape with the heat from my blower. Not the case. They look brand new inside! The outside diameter is 2.9 and 3.1".

11syn3rgy · 03-28-2015, 07:49 PM

TTT

CMYarb · 03-29-2015, 10:48 AM

Will these mate with tsp headers?

LTRS777 · 03-29-2015, 11:33 AM

Quote:

Originally Posted by CMYarb

Will these mate with tsp headers?

Lol thats what i was eluding to. Looking for a set of high flows as a backup if catless gets to be too much

11syn3rgy · 03-29-2015, 12:06 PM

Quote:

Originally Posted by CMYarb

Will these mate with tsp headers?

I guess you'd need to find out if TSP headers and Stainless Works (1 7/8) LT headers are the same. I ordered mine as the "factory connect" so I have no idea why they wouldn't. I have Borla axle-back exhaust but my x-pipe is stock. Lemme know if guys are interested? Otherwise I'll just hang on to them. Might not be a bad idea to have them as a back up anyways.

11syn3rgy · 04-02-2015, 06:38 PM

Still available guys

ODB720 · 04-04-2015, 08:28 PM

Are these still available.

03-27-2015, 05:50 PM	#1
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Stainless Works HF cats $100 Hey guys, I just decided to remove my SW high-flow cats. I've only had them on my Camaro for about 7-8K miles and they are in perfect condition. To be honest, I thought they might be in tough shape since I'm supercharged, but I guess it's true what they say, it's all in the tune. I'm running about 9 psi on my L99 Camaro and I have been very impressed with SW quality. I have their LT headers as well. Good stuff. Lemme know if anyone is interested? $100 plus shipping seems fair from what I've seen them go for. Thanks! John __________________ Magnacharged L99, 3.4 pulley, 9.5 psi, CAI Inc cold air intake, ID-850's, ZL1 pump with ADM FPCM, MT 305/45R18 DR's, 17x4.5 Race Star front skinnies, Stainless Power LT 1 7/8 headers & off-road pipes, BMR rear suspension goodies, JRE Super tensioner, JRE race scoop, Borla S-type and tuned by Jannetty. 11.08 at 124.5 mph with a 1.62 60' is my PB to date. Last edited by 11syn3rgy; 03-28-2015 at 07:48 PM.

03-27-2015, 06:42 PM	#2
LTRS777 Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014 Location: AL Posts: 610	See through photos? __________________ '14 Saleen 620 White Label #14-011 ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708

03-27-2015, 10:15 PM	#3
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Here you go... Attached Images __________________ Magnacharged L99, 3.4 pulley, 9.5 psi, CAI Inc cold air intake, ID-850's, ZL1 pump with ADM FPCM, MT 305/45R18 DR's, 17x4.5 Race Star front skinnies, Stainless Power LT 1 7/8 headers & off-road pipes, BMR rear suspension goodies, JRE Super tensioner, JRE race scoop, Borla S-type and tuned by Jannetty. 11.08 at 124.5 mph with a 1.62 60' is my PB to date.

03-27-2015, 10:16 PM	#4
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Another one... Attached Images __________________ Magnacharged L99, 3.4 pulley, 9.5 psi, CAI Inc cold air intake, ID-850's, ZL1 pump with ADM FPCM, MT 305/45R18 DR's, 17x4.5 Race Star front skinnies, Stainless Power LT 1 7/8 headers & off-road pipes, BMR rear suspension goodies, JRE Super tensioner, JRE race scoop, Borla S-type and tuned by Jannetty. 11.08 at 124.5 mph with a 1.62 60' is my PB to date.

03-27-2015, 10:20 PM	#5
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Last one.... Attached Images __________________ Magnacharged L99, 3.4 pulley, 9.5 psi, CAI Inc cold air intake, ID-850's, ZL1 pump with ADM FPCM, MT 305/45R18 DR's, 17x4.5 Race Star front skinnies, Stainless Power LT 1 7/8 headers & off-road pipes, BMR rear suspension goodies, JRE Super tensioner, JRE race scoop, Borla S-type and tuned by Jannetty. 11.08 at 124.5 mph with a 1.62 60' is my PB to date.

03-27-2015, 10:49 PM	#6
LTRS777 Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014 Location: AL Posts: 610	Do you know inlet/outlet size? Ty. Why do you think they are in bad shape? __________________ '14 Saleen 620 White Label #14-011 ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708

03-28-2015, 07:49 PM	#8
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	TTT __________________ Magnacharged L99, 3.4 pulley, 9.5 psi, CAI Inc cold air intake, ID-850's, ZL1 pump with ADM FPCM, MT 305/45R18 DR's, 17x4.5 Race Star front skinnies, Stainless Power LT 1 7/8 headers & off-road pipes, BMR rear suspension goodies, JRE Super tensioner, JRE race scoop, Borla S-type and tuned by Jannetty. 11.08 at 124.5 mph with a 1.62 60' is my PB to date.

03-29-2015, 10:48 AM	#9
CMYarb Drives: 2011 CAMARO SIM 2SS/RS Join Date: Nov 2012 Location: Chicago Posts: 598	Will these mate with tsp headers?

04-02-2015, 06:38 PM	#12
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Still available guys __________________ Magnacharged L99, 3.4 pulley, 9.5 psi, CAI Inc cold air intake, ID-850's, ZL1 pump with ADM FPCM, MT 305/45R18 DR's, 17x4.5 Race Star front skinnies, Stainless Power LT 1 7/8 headers & off-road pipes, BMR rear suspension goodies, JRE Super tensioner, JRE race scoop, Borla S-type and tuned by Jannetty. 11.08 at 124.5 mph with a 1.62 60' is my PB to date.

04-04-2015, 08:28 PM	#13
ODB720 ODB720 Drives: BLK 2010 CAMARO SS/RS L99/ls3 Join Date: Sep 2009 Location: H-TOWN TX. Posts: 127 View My Garage	Are these still available.