08-22-2016, 03:07 PM | #1 |
Drives: 2014 Camaro 2LT Deep Magenta Join Date: Apr 2015
Location: Oklahoma
Posts: 367
|
14 camaro steering wheel whine
Hey guys some advise I took the car to the dealership and they stayed they lubricated the boot on the steering wheel however, when I drive and turn it slowly or have the radio down it has some kinda whine noise very subtle and whenever you just sit there idle move it left and right you can just here it's like rubbing 2 things together..
Anywho, it doesn't impact driving as I'm awareness of.. Should I take it back to dealer and I also, need to ask why they added 18 miles and yet it's not fixed.. |
08-22-2016, 07:33 PM | #2 |
|
Mine does the same thing . If I remember right my 2003 GrandAm made the same subtle noise .
__________________
Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.
|
08-23-2016, 06:09 AM | #3 |
Drives: 2014 Camaro 2LT Deep Magenta Join Date: Apr 2015
Location: Oklahoma
Posts: 367
|
Think I should be worried or as long as it doesn't impact the driving?
|
08-28-2016, 04:48 AM | #4 |
Drives: 2014 Camaro 1LS Join Date: Apr 2014
Location: Georgia
Posts: 45
|
I have the same problem... the dealer replaced the strut cartridges but 5 months later I have the same problem
__________________
|
08-29-2016, 11:34 AM | #5 |
Drives: 2014 Camaro 2LT Deep Magenta Join Date: Apr 2015
Location: Oklahoma
Posts: 367
|
Do you think we should be worried or I should go back again and replicate it? You can mainly hear it like coming from the actually steering wheel like inside the chevy logo. I turn with no problem but still sounds like a slight whine like if plastic/rubber
|
11-23-2016, 03:06 AM | #6 |
Drives: SS12 Join Date: Aug 2016
Location: UAE
Posts: 18
|
Could you give us a break identification for replacing that part you said about the strut cartridges ??
Many thanks for you advises |
01-28-2017, 12:27 PM | #7 |
Drives: 2021 Camaro ZL1 Join Date: Sep 2016
Location: Long Island
Posts: 114
|
sorry to bump a dead thread, but on two cars ive owned that had the issue (both mopar), the problem was the clock spring which does sound like its coming from behind the logo. it only inches behind...wonder what they actually did replace at the dealer. most of the time the first fix will be graphite lube...
|
02-06-2017, 12:10 PM | #8 |
Drives: 2011 SGM 2SS/RS M6 Join Date: Jan 2011
Location: Cottonwood, CA
Posts: 142
|
There were many suggestions here in Camaro5.com as to this reported steering wheel wine the OP mentions.
Below is a thread that correctly identified the noise my 2010 SS/RS was making. You can read down to post #11 which defines what part my dealer replaced and fixed the problem once and for all. http://www.camaro5.com/forums/showthread.php?t=419268
__________________
Mods - Hurst ST Shifter, Cold Air Inductions CAI, Noweeds, Flowmaster's HushPower Axle-Back, Tinted Windows, Gill Fade Decals, Green Interior & Trunk LED Lighting, Pers-Lic-Plates: SKTL GRN
|
|
|
|
|