06-19-2013, 08:05 PM | #1 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Help SLP under-drive pulley
Need some help with belt part #. The SLP instructions say to use a serpentine belt that's 82.7 long. Looks way to long for the 2013, now the instructions only list 2010 model. Also how do I find a 2013 belt diagram [ think GM would of put that under the hood? They forgot that with the AC belt tensioner.
|
06-19-2013, 09:09 PM | #2 |
|
Can't help you with the belt length, but there should be a belt routing diagram in the owners manual, technical data section. At least there is in the 10 & 12 manuals. For what it's worth, I learned a long time ago that my memory is garbage, so I make a quick sketch before I remove any serpentine belt.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
06-19-2013, 09:10 PM | #3 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Do you have electronic steering?
Edit, i see you have a 1LE. You have electronic steering. This is why you have a shorter belt |
06-19-2013, 09:14 PM | #4 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
|
06-19-2013, 09:17 PM | #5 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Your accessory drive belt is the same as a ZL1
You will probably have to measure your belt length and get it from a local parts store since you have put the underdrive pulley on it. |
06-19-2013, 09:31 PM | #6 |
Drives: 2012 SS LS3 | Silver Frost Metallic Join Date: Apr 2011
Location: Illinois
Posts: 342
|
Wondering why no one sells this pulley as a kit with a gator back belt? Also, while we are talking pulleys, does anyone know how many of the different pulleys can be replaced on this car?
Are these lighter and hence less rotating mass, or are these smaller pulleys? I'm just turning my attention to these now...
__________________
__________________________________________
Ironman John |
06-19-2013, 09:36 PM | #7 | |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Quote:
We just recently installed an Underdrive pulley on a Dusk edition and just got the belt our selves. Ill try to find the belt size we used. Btw, the ac belt has a tool that is used to install it. It usually comes in the box with the new belt from GM. |
|
06-19-2013, 09:40 PM | #8 | |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Quote:
|
|
06-19-2013, 09:52 PM | #9 | |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Quote:
K060750 |
|
06-19-2013, 10:00 PM | #10 |
Drives: 2013 2SS/RS L99 Join Date: Oct 2012
Location: Denham Springs La.
Posts: 811
|
If it is a 25% under drive the AC belt #4K350 and the main drive belt #785K6. This is what I have on mine.
__________________
2013 2SS/RS L99/A6 Crystal Red Metallic Tincoat 12.76@108.98mph Bone Stock
12.46@111.19mph with New Era CAI & U/D Pulley 12.12 @ 114.16 after Stainless Power headers and no tune yet on stock P-Zero's! 12.007@ 115.20 With 18" Drag Radials - 11.93 @115.19 Added a PTB 11.76 @116.59 With Yank SS3200 Converter - 11.63 @116.52 After PI and Tuning 11.44 @118.75 New Best 10.72 @127.93 after heads and Cam and Yank SS3600 |
06-19-2013, 11:24 PM | #11 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Thanks ^^^^^^^^^
__________________
|
06-20-2013, 04:29 AM | #12 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
Thanks for the info. I will head out to the parts store today. Trying to wrap this up before my headers show up.
|
06-20-2013, 04:30 AM | #13 |
Drives: 2013 1LE Join Date: May 2013
Location: NJ
Posts: 685
|
|
06-20-2013, 09:01 AM | #14 |
Drives: 2013 2SS/RS L99 Join Date: Oct 2012
Location: Denham Springs La.
Posts: 811
|
__________________
2013 2SS/RS L99/A6 Crystal Red Metallic Tincoat 12.76@108.98mph Bone Stock
12.46@111.19mph with New Era CAI & U/D Pulley 12.12 @ 114.16 after Stainless Power headers and no tune yet on stock P-Zero's! 12.007@ 115.20 With 18" Drag Radials - 11.93 @115.19 Added a PTB 11.76 @116.59 With Yank SS3200 Converter - 11.63 @116.52 After PI and Tuning 11.44 @118.75 New Best 10.72 @127.93 after heads and Cam and Yank SS3600 |
|
|
|
|