Forgestar Family

[mtl-biker]

Need your help

I found at a good price a set of cf 10 for sale it was on a Corvette C6 ZR1 offsets

Front is 19x10
Back is 20x12

I want to put 285/40/19 on the front and 315/35/20 for the back with Michelin Pilot SS

When i jack up the car and try the 19/10 in the front it was very close of the shock did you think its normal and did i have a good set up of tires to clear on my 2010 SS ???
Did i need spacer???

Thanks to answered
Mario

[ModBargains.com]

Originally Posted by mtl-biker

Need your help

I found at a good price a set of cf 10 for sale it was on a Corvette C6.

Front is 19x10
Back is 20x12

I want to put 285/40/19 on the front and 315/35/20 for the back with Michelin Pilot SS

When i jack up the car and try the 19/10 in the front it was very close of the shock did you think its normal and did i have a good set up of tires to clear on my 2010 SS

Thanks to answered
Mario

Offsets will be way off, you'll need spacers to make that fitment work. I'd verify the offsets that were built on those wheels and then determine how much you're going to have to spend in spacers and see if it's worth the lesser cost for a used set up. 20x12 on the rears on Gen 5 Camaro's I've done once before, but it sticks outside the fenders on the rears, it's just too large, 11" is a better fit for these cars.

If it was me, even if it was $500 off retail cost, I'd still get your set tailor made specifically for your application in an appropriate size to avoid any headaches and issues with trying to make the C6 take off Forgestars work, just not worth the hassle for me.

[mtl-biker]

Originally Posted by ModBargains.com

Offsets will be way off, you'll need spacers to make that fitment work. I'd verify the offsets that were built on those wheels and then determine how much you're going to have to spend in spacers and see if it's worth the lesser cost for a used set up. 20x12 on the rears on Gen 5 Camaro's I've done once before, but it sticks outside the fenders on the rears, it's just too large, 11" is a better fit for these cars.

If it was me, even if it was $500 off retail cost, I'd still get your set tailor made specifically for your application in an appropriate size to avoid any headaches and issues with trying to make the C6 take off Forgestars work, just not worth the hassle for me.

Ok thanks

I could have the wheels for $800 it was a good deal it was never install on a car.

Send me a PM for cf 10 in deep concave in the gun metal for the largest size possible for my car.
I think the shipping to Canada will cost me a arm loll
Thanks
Mario

[ModBargains.com]

Originally Posted by mtl-biker

Ok thanks

I could have the wheels for $800 it was a good deal it was never install on a car.

Send me a PM for cf 10 in deep concave in the gun metal for the largest size possible for my car.
I think the shipping to Canada will cost me a arm loll
Thanks
Mario

That is a good deal, but at least in my mind, it's not worth the hassle of getting the right size spacer to make it work. Shipping to Canada isn't that bad, but I'll get you the details over PM.

[ajp]

Had mine since 2011. Quality and finish is superb.

[LostInAustin]

Guess I'm in the family now ....



the center caps are jacked ... need to order a set

[Anaconda]

Forgestar F14's in

Color: Semi Gloss Black

Wheel size:
20X9.5 front
20X11 rear

Tires: Michelin Pilot Super Sport 285/35's all around.

[Bo White]

Updated pic. Painted my wheels and put the splitter back on.