Check out my AAC Lights - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RJS21989 · 06-30-2010, 05:28 PM

Here is a broken bulb from AAC. My inverter started smoking and the light quit. When I called andy at AAC, Who no longer works there, He said send it back and Ill get you a new one. That was June 15th. Now come to find out that they are going to send me an inverter but they may not send a bulb, cause its broken.
Picture 1: Took red lens cover off
Picture 2: Close up of broken bulb
Picture 3: The bulb fell once I heated the epoxy.

overhaulengines · 06-30-2010, 05:35 PM

did they ever work? did it smoke right away of after some time (days)?

Lupe

RJS21989 · 06-30-2010, 05:47 PM

Yes they worked for two weeks.

Pumpkin1LT · 06-30-2010, 05:50 PM

Damn.. Andy took care of my order too... Hope the same doesn't happen to me. Did you have any issues with the seal job he did?

RJS21989 · 06-30-2010, 05:54 PM

I installed it myself. Followed the directions to the "T".

GSUNCSU · 06-30-2010, 05:58 PM

I got bunches of AAC stuff, no problems yet, but I will stay tuned.

Bone · 06-30-2010, 06:03 PM

I had no problem with the CFFL afterburner... heres my camaro tail lights

I love them and I would recommend them to anyone who would like to install them

Pumpkin1LT · 06-30-2010, 06:08 PM

Don't think my MANY problems were a matter if an AAC issue, but the person working for them who was in charge of my account. Which is why I never posted anything disparaging against AAC. It's all worked out now I'm sure. I love the products AAC offers! Getting ready to complete my package with the Amber CCFL Halo's and fogs. Can't wait!

RJS21989 · 06-30-2010, 06:10 PM

Don't get me wrong, I love them too... I just can't believe that I am being put thru this. Waiting 15 days for a response. If I hadn't called today, they would have never sent me a thing.

GSUNCSU · 06-30-2010, 06:14 PM

Bone, looks good, I have the CCFLs also, Pumpkin, I hear ya', I've had zero issues with AAC, RJS, hang in there, they seem to make their issues right.

Pumpkin1LT · 06-30-2010, 06:17 PM

Quote:

Originally Posted by RJS21989

Don't get me wrong, I love them too... I just can't believe that I am being put thru this. Waiting 15 days for a response. If I hadn't called today, they would have never sent me a thing.

Believe me I understand! If I wouldn't have called I would never be receiving my footwell lighting that I had already been charged for. But it wasn't AAC's fault.. It was Andy. Jonathan and Justin are trying to contact all of Andy's accounts to correct all of his screw ups, and take on all of his accounts. Most likely they had no idea about your account and thy you were setting this up with Andy. I'm sure either Jonathan or Justin will help you out... They are trying to clean up his mess.

Ivan @ Southwest Speed · 06-30-2010, 10:48 PM

Dude...AAC is stand up. Just got lost in the shuffle with the other guy leaving and all.

I made one phone call and they hooked me up righteous with my issue.

Best of luck and hope that you get it replaced/repaired asap.

Keep us posted!
Ivan

Shuffler · 07-01-2010, 08:52 AM

Quote:

Originally Posted by RJS21989

Here is a broken bulb from AAC. My inverter started smoking and the light quit. When I called andy at AAC, Who no longer works there, He said send it back and Ill get you a new one. That was June 15th. Now come to find out that they are going to send me an inverter but they may not send a bulb, cause its broken.
Picture 1: Took red lens cover off
Picture 2: Close up of broken bulb
Picture 3: The bulb fell once I heated the epoxy.

I don't think it matters who handled your issue originally. AAC will get to the bottom of the problem.

I have had no problems with AAC at all.

Support@OracleLights.com · 07-01-2010, 02:47 PM

If anyone needs help with anything please let me know and I'll be happy to help you! Thank you for your patience and I will get things straightened out for all of you! I am in the office Monday - Friday from 9am - 6pm so feel free to call, email, or PM me if you have any questions.

06-30-2010, 05:28 PM	#1
RJS21989 Drives: 2010 2SS/RS Red w/ Black AT/6 Join Date: Sep 2009 Location: Pensacola, FL Posts: 143 View My Garage	Check out my AAC Lights Here is a broken bulb from AAC. My inverter started smoking and the light quit. When I called andy at AAC, Who no longer works there, He said send it back and Ill get you a new one. That was June 15th. Now come to find out that they are going to send me an inverter but they may not send a bulb, cause its broken. Picture 1: Took red lens cover off Picture 2: Close up of broken bulb Picture 3: The bulb fell once I heated the epoxy. Attached Images

06-30-2010, 05:50 PM	#4
Pumpkin1LT Drives: 2010 Camaro 2SS Join Date: May 2010 Location: Altus AFB, Oklahoma Posts: 861 View My Garage	Damn.. Andy took care of my order too... Hope the same doesn't happen to me. Did you have any issues with the seal job he did? __________________ A happy wife is one in the garage getting dirty under her 2010 Camaro!

06-30-2010, 05:58 PM	#6
GSUNCSU Watch This! Drives: Super Charged 1SS/RS, M6, CGM Join Date: Dec 2009 Location: Columbus, GA Posts: 777 View My Garage	I got bunches of AAC stuff, no problems yet, but I will stay tuned. __________________ K&N CAI, Wet Okole Seat Covers, MagnaFlow Street Perf. Ex. (Axle Back), MPD Hood, Gary's Customz ZL1 Fascia/Vented Fenders/Custom Stripes/Paint, AAC Afterburners/Fog Light Halos/Side Markers/Misc LEDs, Bee-Otch Air Freshener, Hurst Shifter and Line-Loc(APEX), RPI Splash Guards, MagnaCharger *(Texas-Speed)(Installed by ME),* Rx Catch Can and Breather, Billet Pulleys (SC2150), ARH Headers, LPE Twin Fuel Pump, Custom Blower Cam, Custom Tune TBArwhp, TBArwtorq, Boost Gauge and Single Pod (MTI)

06-30-2010, 06:03 PM	#7
Bone 2SS RJT OWNER/OPERATOR Drives: 2010 2SS LS3 RJT Join Date: Jan 2010 Location: Currently on the 3rd Rock. Temporarily Posts: 540 View My Garage	I had no problem with the CFFL afterburner... heres my camaro tail lights I love them and I would recommend them to anyone who would like to install them __________________ Fly low and Avoid the radar!

06-30-2010, 06:08 PM	#8
Pumpkin1LT Drives: 2010 Camaro 2SS Join Date: May 2010 Location: Altus AFB, Oklahoma Posts: 861 View My Garage	Don't think my MANY problems were a matter if an AAC issue, but the person working for them who was in charge of my account. Which is why I never posted anything disparaging against AAC. It's all worked out now I'm sure. I love the products AAC offers! Getting ready to complete my package with the Amber CCFL Halo's and fogs. Can't wait! __________________ A happy wife is one in the garage getting dirty under her 2010 Camaro!

06-30-2010, 05:35 PM	#2
overhaulengines Drives: Red 2SS/RS M6 Join Date: Apr 2010 Location: San Antonio, Texas Posts: 6,219	did they ever work? did it smoke right away of after some time (days)? Lupe

06-30-2010, 05:47 PM	#3
RJS21989 Drives: 2010 2SS/RS Red w/ Black AT/6 Join Date: Sep 2009 Location: Pensacola, FL Posts: 143 View My Garage	Yes they worked for two weeks.

06-30-2010, 05:54 PM	#5
RJS21989 Drives: 2010 2SS/RS Red w/ Black AT/6 Join Date: Sep 2009 Location: Pensacola, FL Posts: 143 View My Garage	I installed it myself. Followed the directions to the "T".

06-30-2010, 06:10 PM	#9
RJS21989 Drives: 2010 2SS/RS Red w/ Black AT/6 Join Date: Sep 2009 Location: Pensacola, FL Posts: 143 View My Garage	Don't get me wrong, I love them too... I just can't believe that I am being put thru this. Waiting 15 days for a response. If I hadn't called today, they would have never sent me a thing.

06-30-2010, 06:14 PM	#10
GSUNCSU Watch This! Drives: Super Charged 1SS/RS, M6, CGM Join Date: Dec 2009 Location: Columbus, GA Posts: 777 View My Garage	Bone, looks good, I have the CCFLs also, Pumpkin, I hear ya', I've had zero issues with AAC, RJS, hang in there, they seem to make their issues right. __________________ K&N CAI, Wet Okole Seat Covers, MagnaFlow Street Perf. Ex. (Axle Back), MPD Hood, Gary's Customz ZL1 Fascia/Vented Fenders/Custom Stripes/Paint, AAC Afterburners/Fog Light Halos/Side Markers/Misc LEDs, Bee-Otch Air Freshener, Hurst Shifter and Line-Loc(APEX), RPI Splash Guards, MagnaCharger *(Texas-Speed)(Installed by ME),* Rx Catch Can and Breather, Billet Pulleys (SC2150), ARH Headers, LPE Twin Fuel Pump, Custom Blower Cam, Custom Tune TBArwhp, TBArwtorq, Boost Gauge and Single Pod (MTI)

06-30-2010, 10:48 PM	#12
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Dude...AAC is stand up. Just got lost in the shuffle with the other guy leaving and all. I made one phone call and they hooked me up righteous with my issue. Best of luck and hope that you get it replaced/repaired asap. Keep us posted! Ivan

07-01-2010, 02:47 PM	#14
Support@OracleLights.com Drives: www.CamaroLighting.com Join Date: May 2010 Location: New Orleans, LA Posts: 3,245	If anyone needs help with anything please let me know and I'll be happy to help you! Thank you for your patience and I will get things straightened out for all of you! I am in the office Monday - Friday from 9am - 6pm so feel free to call, email, or PM me if you have any questions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAC / Adaptive Performance	BumbleBeeSS2009	Vendor and Seller review / feedback / experiences	2	06-17-2010 01:49 PM
Does anybody install AAC halo lights?	RJT	Cosmetics and Lighting Modification Discussions	3	04-30-2010 10:07 PM
HID's and Fog Lights	MightyT	5th Gen Camaro SS LS LT General Discussions	3	12-24-2009 10:17 AM
black out tail lights, vinyl or stickers?	Darth_Emma	Cosmetics and Lighting Modification Discussions	3	12-14-2009 12:03 AM
lights wont go off	Parrish	4th Generation Camaros	3	09-09-2009 09:11 AM