List of Spoilers that Fit Stock holes - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TwentyTen2SSRS · 10-18-2013, 11:43 PM

I tried searching numerous ways and couldn't find a thread that addressed this.

Does anyone know which spoilers will fit in the holes form the factory "bump" spoiler? Would like to get a new spoiler but don't want to have exposed holes or have to worry about filling them.

Any help is much appreciated.

TGIF!

BluePhoenix · 10-19-2013, 05:49 AM

If you have an LS there shouldn't be any holes in your trunk lid for the stock spoiler. Any spoiler except the high wing should fit. ZL1 spoiler leaves a clip mount hole open & visable.

CookieCk · 10-19-2013, 07:25 AM

Quote:

Originally Posted by BluePhoenix

If you have an LS there shouldn't be any holes in your trunk lid for the stock spoiler. Any spoiler except the high wing should fit. ZL1 spoiler leaves a clip mount hole open & visable.

For 2012 and up the spoiler was made stock for all trim levels, so yes the LS has the spoiler and the holes in the trunk already.

As far as what else fits, personally I like the Anvil spoiler and it fits the stock holes. There's also the MPD1 and a few other aftermarket ones that are supposed to be direct fits. The GM Dovetail spoiler fits in the stock holes, but it has extra pieces that bolt on to the sides and require holes drilled.

AirManFL · 10-19-2013, 07:41 AM

It might be easier to list the ones that don't fit.

I know the MPD1 and the NLP fit.

Rob

Mwalterhouse · 10-19-2013, 08:16 AM

ZTA Trans Am spoiler, similar in appearance to the 2014 Spoiler.

TwentyTen2SSRS · 10-19-2013, 08:59 AM

Thanks guys.. I just don't want to buy one to find out it'll leave holes open or exposed. Was looking at both GM dove tail and anvil (done being back ordered yet!?) but thought if I had a list I could look at each in that fits to see what would look best and fit budget best etc

Sent from my iPhone using Tapatalk 2

AL1SS/RS · 10-19-2013, 11:19 AM

+ 1 on the NLP spoiler it fits the oem. hole locations.

DesertCamaro · 10-19-2013, 11:19 AM

Havoc uses all factory holes, and the newer versions fit good now.

Cincy10SSRS · 10-19-2013, 12:00 PM

Z/TA is perfect.
http://www.camaro5.com/forums/showthread.php?t=323298

JDP Sales · 10-19-2013, 12:17 PM

The Anvil is my favorite, but they are on what seems to be a never ending back order it seems. The orders come in faster than they can produce them, so if you really want an Anvil spoiler, your best bet is to place the order and just forget about it for a while. The current lead time is looking like early January.

Let me know if you have any questions.

Best regards,

Tyler
888-308-6007

TwentyTen2SSRS · 10-19-2013, 12:54 PM

There is this one member Kold got. Painted and shipped for like $130

Zl1 replica.

http://m.ebay.com/itm/181149566957

Thoughts?

Sent from my iPhone using Tapatalk 2

BluePhoenix · 10-19-2013, 03:43 PM

Quote:

Originally Posted by 2013BlackLS

There is this one member Kold got. Painted and shipped for like $130

Zl1 replica.

http://m.ebay.com/itm/181149566957

Thoughts?

Sent from my iPhone using Tapatalk 2

It's the same as the ZL1 and it will leave you with one or two visible open trunk lid holes from the stock spoiler. That's why if I were to be interested in the ZL1 spoiler I'd go with the Z/TA spoiler instead. I also would say +1 for the NLP. I personally would go different route than the typical SS/High Wing/ZL1/etc. spoilers and go after the best looks for the car via aftermarket and stand out from the rest a little.

That's only my .02.

TwentyTen2SSRS · 10-19-2013, 04:37 PM

Couldn't agree more.

Dove tail is what I wanted. I'll look into the slp

Sent from my iPhone using Tapatalk 2

TwentyTen2SSRS · 10-19-2013, 05:17 PM

Do you have the link to the NLP spoiler? I can't seem to find it though Google.. only threads from here lol.

10-18-2013, 11:43 PM	#1
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	List of Spoilers that Fit Stock holes I tried searching numerous ways and couldn't find a thread that addressed this. Does anyone know which spoilers will fit in the holes form the factory "bump" spoiler? Would like to get a new spoiler but don't want to have exposed holes or have to worry about filling them. Any help is much appreciated. TGIF! __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

10-19-2013, 05:49 AM	#2
BluePhoenix Drives: GMC Sierra AT4 Join Date: Jul 2013 Location: Hanover, PA Posts: 3,281	If you have an LS there shouldn't be any holes in your trunk lid for the stock spoiler. Any spoiler except the high wing should fit. ZL1 spoiler leaves a clip mount hole open & visable. __________________ 2020 GMC Sierra AT4 6.2L WTB - 2010 Camaro 1SS or 2SS, Aqua Blue Metallic, A6

10-19-2013, 08:59 AM	#6
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Thanks guys.. I just don't want to buy one to find out it'll leave holes open or exposed. Was looking at both GM dove tail and anvil (done being back ordered yet!?) but thought if I had a list I could look at each in that fits to see what would look best and fit budget best etc Sent from my iPhone using Tapatalk 2 __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

10-19-2013, 11:19 AM	#7
AL1SS/RS Drives: 2012 camaro 1SS/RS LS3 Join Date: Oct 2012 Location: Downingtown pa. Posts: 94	+ 1 on the NLP spoiler it fits the oem. hole locations. __________________

10-19-2013, 12:00 PM	#9
Cincy10SSRS Drives: 2010 2SS RS M6 Join Date: Mar 2011 Location: Cincinnati area Posts: 1,522	Z/TA is perfect. http://www.camaro5.com/forums/showthread.php?t=323298 __________________ Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.

10-19-2013, 07:41 AM	#4
AirManFL Mid-Florida Camaro Club Drives: 2018 ZL1 Join Date: Nov 2011 Location: Orlando, FL Posts: 2,220	It might be easier to list the ones that don't fit. I know the MPD1 and the NLP fit. Rob

10-19-2013, 08:16 AM	#5
Mwalterhouse Drives: 2010 Camaro SS/RS LS3 Join Date: Apr 2013 Location: Bloomfield Hills, Michigan Posts: 1,088 View My Garage	ZTA Trans Am spoiler, similar in appearance to the 2014 Spoiler.

10-19-2013, 11:19 AM	#8
DesertCamaro Drives: Fast Join Date: Mar 2011 Location: Phoenix, AZ Posts: 785	Havoc uses all factory holes, and the newer versions fit good now.

10-19-2013, 12:17 PM	#10
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	The Anvil is my favorite, but they are on what seems to be a never ending back order it seems. The orders come in faster than they can produce them, so if you really want an Anvil spoiler, your best bet is to place the order and just forget about it for a while. The current lead time is looking like early January. Let me know if you have any questions. Best regards, Tyler 888-308-6007

10-19-2013, 12:54 PM	#11
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	There is this one member Kold got. Painted and shipped for like $130 Zl1 replica. http://m.ebay.com/itm/181149566957 Thoughts? Sent from my iPhone using Tapatalk 2 __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

10-19-2013, 04:37 PM	#13
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Couldn't agree more. Dove tail is what I wanted. I'll look into the slp Sent from my iPhone using Tapatalk 2 __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

10-19-2013, 05:17 PM	#14
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Do you have the link to the NLP spoiler? I can't seem to find it though Google.. only threads from here lol. __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)