08-08-2012, 01:31 PM | #1 |
V8 lounge member #5
Drives: 12 2SS Synergy Camaro, 05 PontiacG6 Join Date: Dec 2011
Location: Ohio
Posts: 1,301
|
Vortech trade help pls.
I am able to get a deal on a Vortech S/C and he said he no longer has his stock 'Power steering pump bracket' and the vortech has a replacement one that takes it's place?
I am not familiar with this piece and a picture or validation of where it's at would help alot. He is too far away to check for myself until the deal is final. |
08-08-2012, 02:15 PM | #2 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
Sometimes, a used supercharger kit is not such a good deal when parts are missing. If you need any missing parts we can provide them for you. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
08-08-2012, 02:16 PM | #3 |
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
are looking for stock bracket? in the pic upper right is one
|
08-08-2012, 03:10 PM | #4 |
V8 lounge member #5
Drives: 12 2SS Synergy Camaro, 05 PontiacG6 Join Date: Dec 2011
Location: Ohio
Posts: 1,301
|
It's the stock bracket that He is missing and wants to trade me for it. Problem is, I wanted to make sure he wasn't mistaken about having to replace the bracket. Also I don't plam on putting it on til I get my cam installed so I would like to keep my bracket and show him where he could order one.
|
08-08-2012, 04:25 PM | #5 |
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
mine is for sale ,,,but there only 20 bucks at a dealer
|
08-08-2012, 05:32 PM | #6 |
instigator
Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010
Location: 72034
Posts: 3,979
|
That's what I would do...buy him one at dealer. I take it he didn't do his install? He will need more than that to put it back to stock. While you are At the dealer, buy a new crank bolt as well. It is TTY. Ask him about the pin too. You can make a pin with a drill bit cut off if need be. (smooth end that goes in drill). Personally, if this kit is 3500 or less...go for it and get with Ted and get what u need that is missing or can't be reused.
John s.
__________________
-John S.
|
|
|
|
|