05-09-2021, 02:33 AM | #1 |
Drives: 2016 Chevrolet Camaro 1SS Join Date: Sep 2019
Location: Hawaii
Posts: 19
|
Exhaust thoughts for 2016 1ss
Hello all,
I am wanting to put long tube headers on my camaro plus run straight pipes back to muffler delete quad tips. I don't want the resonators or cats. Has anyone done this? Thoughts on brand for headers and the straight pipes/muffler deletes pipes? Do the long tube drag at all on 2016 1ss? Currently I have a Nick Williams 103mm Throttle body with airforce 103mm aftermarket air intake manifold with rotofab cold air intake. Any ideas and help are much appreciated! |
05-09-2021, 06:48 AM | #2 |
Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
In California? Good luck.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
05-09-2021, 08:06 AM | #3 |
Drives: 2020 LT1 M6 Join Date: Jan 2016
Location: South, the DEEP south
Posts: 1,114
|
|
05-09-2021, 09:12 AM | #4 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
__________________
2016+ camaro: everyone’s first car
|
05-09-2021, 09:56 AM | #5 | |
Drives: 2020 LT1 M6 Join Date: Jan 2016
Location: South, the DEEP south
Posts: 1,114
|
Quote:
|
|
05-09-2021, 10:29 AM | #6 | |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 815
|
Quote:
|
|
05-09-2021, 11:13 AM | #7 |
Drives: 2018 Chevrolet Camaro 2SS 1LE 6M Join Date: Jul 2019
Location: California
Posts: 283
|
https://youtu.be/OxwokEfI-io
My car. It was too loud for my taste so I switched back to the stock NPP muffler.
__________________
Bolt-ons.
|
05-09-2021, 07:54 PM | #8 |
Drives: 2016 Chevrolet Camaro 1SS Join Date: Sep 2019
Location: Hawaii
Posts: 19
|
My bad just updated...im in hawaii
|
05-09-2021, 07:54 PM | #9 |
Drives: 2016 Chevrolet Camaro 1SS Join Date: Sep 2019
Location: Hawaii
Posts: 19
|
In hawaii just updated
|
05-09-2021, 07:56 PM | #10 |
Drives: 2016 Chevrolet Camaro 1SS Join Date: Sep 2019
Location: Hawaii
Posts: 19
|
Thank you for actually posting something that gives insight on my question rather than just commenting on California.
|
05-09-2021, 07:57 PM | #11 |
Drives: 2016 Chevrolet Camaro 1SS Join Date: Sep 2019
Location: Hawaii
Posts: 19
|
Lol that actually sounds nice! Thanks for the video!
|
05-09-2021, 07:58 PM | #12 | |
Drives: 2016 Chevrolet Camaro 1SS Join Date: Sep 2019
Location: Hawaii
Posts: 19
|
Quote:
|
|
05-09-2021, 10:21 PM | #13 |
Drives: 2020 LT1 M6 Join Date: Jan 2016
Location: South, the DEEP south
Posts: 1,114
|
Hope you are ready to wake up the island then. NA18CAMAROSS setup on that video was wake the dead loud, he has made the set up more quiet by removing the MBRP and re-installing the factory NPP muffler.
|
05-11-2021, 07:00 PM | #14 |
Drives: 2017 Camaro 1ss A8 Join Date: Nov 2019
Location: California
Posts: 114
|
I have this setup. Texas speed 1 7/8" long tube headers, 3" off road x pipe, and no mufflers (fully straight piped with long tubes and x pipe) I live in socal, its really loud especially on the higher rpms. Im also on a flex tune and the pops on 91 are really loud and deep. On e85 it dosent really pop.
Really loud cold starts, deep idle, and idle off a cold start is kinda choppy like a small cam. Ive had mopar guys asking if im cammed since they don't really know what real chop sounds like haha, After all that im looking for some carven TR mufflers 3 inch to make sound deeper. |
|
|
Post Reply
|
Tags |
2016 1ss, exhaust, long tube headers |
|
|