You are browsing camaro5 
 |
|
05-12-2015, 02:54 PM
|
#1 |
|
THERAPY
|
Breather Canister?
Does anyone know where I can get another Breather Canisister for the stock intake. I took mine off when I put on my RotoFab, and am wanting to buy another one and put it back on my stock intake so that when I have to smog it I don't have to take it off of the RotoFab one. Not sure if I have to order the stock intake tube which includes the breather canister, or If I can just order the breather canister with the clip. Thanks in advance.
|
|
|
|
05-12-2015, 03:37 PM
|
#2 |
 
Drives: 2013 Camaro ZL1 #2419 Join Date: Jan 2013
Location: Weatherford, Tx
Posts: 289
|
Breather Canister?
You should be able to pass all emission tests with the cold air intake as is! I have had my cold air intake on both times in the past two years and everything passed fine!
__________________
Forged LSA 672 RWHP 712 FT/LBS TQ! The never ending story of I want more power!!
 |
|
|
|
|
05-12-2015, 04:28 PM
|
#3 |
|
Emerald Coast Camaro's
Drives: 2014 ZL1 Join Date: Dec 2011
Location: P.C.B. Florida
Posts: 815
|
show me a pic of what you want and you can have mine
|
|
|
|
|
05-12-2015, 05:24 PM
|
#4 |
|
THERAPY
|
It's the black tube attached to the intake
|
|
|
|
|
06-10-2015, 05:50 PM
|
#5 |
 Drives: 2013 ZL1 Join Date: Nov 2014
Location: WA
Posts: 6
|
It does not appear that you can buy the little canister thing separately. You'll have to buy the whole inlet tube if you want original parts (it comes with the tube plus canister and Oetiker clamp already installed). Part number is 92229653.
Here's another thread on the subject for reference: http://www.camaro5.com/forums/showthread.php?t=389306 |
|
|
|
|
09-20-2019, 07:36 AM
|
#6 |
 Drives: 2013 Chevy CamaroZL1 Join Date: Sep 2019
Location: Greeley, CO
Posts: 1
|
Replacements?
Mine cracked and i bet its due to the heat. Where can i get just the little breather without buying the whole elbow setup?
|
|
|
|
|
09-20-2019, 04:57 PM
|
#7 | |
 
Drives: 2013 ZL1 A6 Camaro Join Date: Jun 2013
Location: Florida
Posts: 171
|
Quote:
|
|
|
|
|
|
09-21-2019, 02:32 PM
|
#8 | |
|
Quote:
Superglue is still holding mine together. Its been about 4 years now. like stated above you cannot just get the tube by itself and the whole Assembly is pretty pricey.
__________________
2013 ZL1 CRT M6
__________________________________________________ ____________________________________ Current Mods: Rotofab CAI, Big Gulp, and Res. ATI Superdamper and 10" Lower, DSX FF Sensor, DSX Aux Fuel Pump, ID850s, Kooks 1 7/8" Headers, Forced Induction Interchiller, McLeod RTX Twin disk. DSX Tuned. Running on 20" MT ET Street SS on stock wheels for the strip. Best 1/4 mile to date:10.81 @130.43 mph w/ 1.61 60' Just added: Jokerz Stage II blower port and FI Interchillers blower lid spacer. |
|
|
|
|
|
|
|
|
 |
|
|
