LMR Punisher Package

[Dlerch18]

Not sure if anyone here has dealt with LMR out of Houston or even has this package themselves. It seems to be a pretty good deal. I mean just doing heads, cam, headers, cold air and a catback would be pretty close to this price for the package. And you would get to keep your stock motor! Any thoughts, concerns, complaints please feel free to chime in! Link is below along with the components of the package!

http://www.latemodelracecraft.com/camaro-punisher.html

Cold Air Induction System
1 7/8 stainless Steel Headers
3x3 X-pipe with high flow cats
02 Extensions
NGK Spark Plugs
MSD 8.5mm Spark Plug Wires
LS2/7 Thermostat
LS7 440CID. Shortblock: New GM LS7 block, Callies 6.125" H Beam rods w/ ARP 2000 7/16" bolts, Wiseco custom 4.135" forged pistons, NPR stainless chrome rings 1.2 1.2 3mm (for high heat applications), Clevite MS 2199 H main brgs, Clevite CB 663 H rod brgs, Dura Bond cam brgs and ARP main studs.
Comp Cam
Roll Master Double roller timing set w/ torington bearing & nitrided gears.
Melling High Volum Oil Pump
Comp OE lifters
Water pump gaskets, Oil Pump inlet Tube, Front Cover, Cranshaft front seal, Oil pump inlet tube O-ring
Rear main cover gasket and rear main seal
Stage 3 LS7 Cylinder Heads with titainum intake valves and springs good to .670 lift
Cometic Head Gaskets
ARP Head Bolts
Comp Hardened Pushrods
LS Valve cover gasket set
Oil Pan Gasket for 7.0L
Assemble Longblock
Underdrive Pulley Kit
LS7 Crank Bolt
RPS Twin Disk Clutch(CARBON)
Slave Cylinder
55lb Injectors
Customer Choice of catback Exhaust System
Synthetic Motor Oil
Oil Filter
Coolant
Shop Supplies
Custom Dyno Tune

[tekteq]

Originally Posted by Dlerch18

Not sure if anyone here has dealt with LMR out of Houston or even has this package themselves. It seems to be a pretty good deal. I mean just doing heads, cam, headers, cold air and a catback would be pretty close to this price for the package. And you would get to keep your stock motor! Any thoughts, concerns, complaints please feel free to chime in! Link is below along with the components of the package!

http://www.latemodelracecraft.com/camaro-punisher.html

Cold Air Induction System
1 7/8 stainless Steel Headers
3x3 X-pipe with high flow cats
02 Extensions
NGK Spark Plugs
MSD 8.5mm Spark Plug Wires
LS2/7 Thermostat
LS7 440CID. Shortblock: New GM LS7 block, Callies 6.125" H Beam rods w/ ARP 2000 7/16" bolts, Wiseco custom 4.135" forged pistons, NPR stainless chrome rings 1.2 1.2 3mm (for high heat applications), Clevite MS 2199 H main brgs, Clevite CB 663 H rod brgs, Dura Bond cam brgs and ARP main studs.
Comp Cam
Roll Master Double roller timing set w/ torington bearing & nitrided gears.
Melling High Volum Oil Pump
Comp OE lifters
Water pump gaskets, Oil Pump inlet Tube, Front Cover, Cranshaft front seal, Oil pump inlet tube O-ring
Rear main cover gasket and rear main seal
Stage 3 LS7 Cylinder Heads with titainum intake valves and springs good to .670 lift
Cometic Head Gaskets
ARP Head Bolts
Comp Hardened Pushrods
LS Valve cover gasket set
Oil Pan Gasket for 7.0L
Assemble Longblock
Underdrive Pulley Kit
LS7 Crank Bolt
RPS Twin Disk Clutch(CARBON)
Slave Cylinder
55lb Injectors
Customer Choice of catback Exhaust System
Synthetic Motor Oil
Oil Filter
Coolant
Shop Supplies
Custom Dyno Tune

The $9999 you are looking at is to add on a supercharger. For the package you gotta call for pricing. $9999 for a whole new engine let alone all these parts would be insane lol.

[Dlerch18]

Originally Posted by tekteq

The $9999 you are looking at is to add on a supercharger. For the package you gotta call for pricing. $9999 for a whole new engine let alone all these parts would be insane lol.

Take a stab at the cost!

[UF4LIFE102SS]

25k

[SSBUSDRVR]

Beat me to it. Think you are mistaking that the price shown is for adding Supercharging. Having a new engine built here and the parts cost for engine alone is much more than that. I am guessing for all that is included , installed and tuned is well north of 20k.

[SSBUSDRVR]

lol Whats up UF Shouldn't you be out driving your car?

[UF4LIFE102SS]

Originally Posted by SSBUSDRVR

lol Whats up UF Shouldn't you be out driving your car?

Waiting on yours! Yeah I should b.

[Dlerch18]

Originally Posted by tekteq

The $9999 you are looking at is to add on a supercharger. For the package you gotta call for pricing. $9999 for a whole new engine let alone all these parts would be insane lol.

Originally Posted by UF4LIFE102SS

25k

Originally Posted by SSBUSDRVR

Beat me to it. Think you are mistaking that the price shown is for adding Supercharging. Having a new engine built here and the parts cost for engine alone is much more than that. I am guessing for all that is included , installed and tuned is well north of 20k.

I believe I did misread! $20-$25K wow! I'm just not sure about the other packages they offer, they claim good horsepower, but when you watch the videos they just aren't putting down the numbers that I would want for that amount of money! I mean $10K for a 550hp package that is showing well below 500hp at the wheels on an L99!

Maybe I am expecting to much but I would think that $10K should get me at least over 500hp!

[UF4LIFE102SS]

Im a S/C owner but maybe ck out TT.

[Dlerch18]

This is the Reaper Package for $9999. Claims 550hp for an L99 obviously at the wheels. Wouldn't that translate to close to 500hp at the wheels?

LMR Cold Air Induction System
American Racing 1 7/8 Stainless Steel Headers/Connection Pipes with high flow cats
02 Extensions
MSD Spark Plug Wires
NGK Spark Plugs
LS3 160* Thermostat
LS3 Cam
Comp Pushrods
Underdrive Pulley Kit
New GM L92 casting, 5 axis CNC machined, Fully assembled
Intake Flow Rate 360 CFM
Exhaust Flow Rate 245 CFM
ARP Head Bolts
GM Head Gaskets
Front Cover Gasket Set
Crank Bolt
Mobil One Synthetic Oil
Mobil One Oil Filter
Custom REAPER Badging
Install complete REAPER Package
Custom Dyno Tune

[Dlerch18]

Originally Posted by UF4LIFE102SS

Im a S/C owner but maybe ck out TT.

I'm not sure of all the bolt ons that go along with your S/C but I would imagine you are well over 500hp at the wheels!

[UF4LIFE102SS]

heres a dyno graph of a l99 I think single turbo

[SSBUSDRVR]

Waiting on yours! Yeah I should b.

Dlerch18 Keep in mind a lot of that is labor and LS7's are not cheap. Going a somewhat cheaper route LS3 Stroker+Progressive Funny Gas and parts only for it are somewhere just north of 12k and there are always numerous odds and ends that are needed and add extra expense. Like UF4LIFE102SS said TT Route may be your best bang for buck.
Hagd can't escape to the office any longer. lol

[Dlerch18]

Originally Posted by UF4LIFE102SS

heres a dyno graph of a l99 I think single turbo

Originally Posted by SSBUSDRVR

Dlerch18 Keep in mind a lot of that is labor and LS7's are not cheap. Going a somewhat cheaper route LS3 Stroker+Progressive Funny Gas and parts only for it are somewhere just north of 12k and there are always numerous odds and ends that are needed and add extra expense. Like UF4LIFE102SS said TT Route may be your best bang for buck.

So I guess the L99 just doesn't make that much power with heads, cam and bolt ons! A TT or a S/C is the only way to go to get north of 500! Well my pipe dream has been crushed for a while!! LOL