So what mods do you have planned for this winter? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 10-30-2015, 09:00 AM

Here in the Northeast with Winter fast approaching we start planning our builds now, so come spring time you don't have to deal with the mad rush in April with 3-4 week appointments and back orders on parts.

I am here to help plan your next mods, if you want to chat give me a call always happy to talk performance.

You can also post here for advice and help.

Winter is always the best time to do your mods, pricing, and wait times are lower, and turn around times are faster.

Ted.

Normagene · 10-30-2015, 09:38 AM

Hi, I'm look'n for a fabrication shop. Thinking of doing front fender vents. I know they sell the plastic inserts, and you do have to cut a big hole, but I'd rather have it fabricated/seamless so there are no seams/gaps.

Not sure if you can recommend a shop in the S.E. Mass area that does this kinda work. Was talkn w/a guy from Florida who had a fab shop do his, look great. Cost a lot more, but it's sheet metal vs plastic/resin.

Here's a pic, and if it's too expensive I'll probably go plastic. $200 unfinished and $340 painted/finished.

I know it's not a racing mod, but I figured you guys must know everyone in the business and could recommend a reliable source.
Thanks

robrocketanski · 10-30-2015, 11:31 AM

JRE 125

A few weeks after our first baby is born. Not sure how this is going to go but I am sure it will be fine

SCHUSS · 10-30-2015, 11:58 AM

Seeing you guys next week! Street Slayer Twin carbon billet clutch and MGW shifter install. I'll be ready for spring! I know you guys will take good care of me!

JANNETTYRACING · 10-30-2015, 12:03 PM

Quote:

Originally Posted by Normagene

Hi, I'm look'n for a fabrication shop. Thinking of doing front fender vents. I know they sell the plastic inserts, and you do have to cut a big hole, but I'd rather have it fabricated/seamless so there are no seams/gaps.

Not sure if you can recommend a shop in the S.E. Mass area that does this kinda work. Was talkn w/a guy from Florida who had a fab shop do his, look great. Cost a lot more, but it's sheet metal vs plastic/resin.

Here's a pic, and if it's too expensive I'll probably go plastic. $200 unfinished and $340 painted/finished.

I know it's not a racing mod, but I figured you guys must know everyone in the business and could recommend a reliable source.
Thanks

We have some talented body shops around us but I am not familiar with shops in your area, Good Luck nice mod.

Ted.

JANNETTYRACING · 10-30-2015, 12:04 PM

Quote:

Originally Posted by robrocketanski

JRE 125

A few weeks after our first baby is born. Not sure how this is going to go but I am sure it will be fine

Congrats on the your first Born, Always the most exciting day of your life.

Thank you for your business.

Ted.

JANNETTYRACING · 10-30-2015, 12:04 PM

Quote:

Originally Posted by SCHUSS

Seeing you guys next week! Street Slayer Twin carbon billet clutch and MGW shifter install. I'll be ready for spring! I know you guys will take good care of me!

Yes sir, Thank you for your business.

Ted.

Chrispy · 10-30-2015, 08:55 PM

Drag radials for me in the spring and hopefully 11.70's.

After that will look at your 10% pulley / tune with the stock airbox and a coolant reservoir. (Big 3 looks awesome)

I prefer the car to look like stock under the hood.

alssiri · 10-31-2015, 06:29 AM

Got my HeartBeat installed , thanks Ted

Ahmad

JANNETTYRACING · 11-02-2015, 09:57 AM

Quote:

Originally Posted by Chrispy

Drag radials for me in the spring and hopefully 11.70's.

After that will look at your 10% pulley / tune with the stock airbox and a coolant reservoir. (Big 3 looks awesome)

I prefer the car to look like stock under the hood.

My 125 RWHP power package upgrade still looks stock under the hood

except for the Headers but hard to see

ram360 · 11-03-2015, 03:40 PM

Probably will keep it simple and just add the big gulp kit to the roto fab, intercooler reservoir, maybe headers. Really don't want to mess with the tune/pulley until the warranty is up.

JANNETTYRACING · 11-04-2015, 08:54 AM

Quote:

Originally Posted by ram360

Probably will keep it simple and just add the big gulp kit to the roto fab, intercooler reservoir, maybe headers. Really don't want to mess with the tune/pulley until the warranty is up.

Simple is good.

You can not add headers without a tune.

Ted.

xrivera91 · 11-04-2015, 09:05 AM

Quote:

Originally Posted by JANNETTYRACING

Simple is good.

You can not add headers without a tune.

Ted.

Agree with that one! Just DIY'ed my headers this weekend and first day was fine now I have CEL so can't remote start! Tune will have to come sooner rather than later.

JANNETTYRACING · 11-04-2015, 09:46 AM

Quote:

Originally Posted by xrivera91

Agree with that one! Just DIY'ed my headers this weekend and first day was fine now I have CEL so can't remote start! Tune will have to come sooner rather than later.

Give me a call I will hook you up with a JRE custom tune.

Ted.

10-30-2015, 09:00 AM	#1
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,221	So what mods do you have planned for this winter? Here in the Northeast with Winter fast approaching we start planning our builds now, so come spring time you don't have to deal with the mad rush in April with 3-4 week appointments and back orders on parts. I am here to help plan your next mods, if you want to chat give me a call always happy to talk performance. You can also post here for advice and help. Winter is always the best time to do your mods, pricing, and wait times are lower, and turn around times are faster. Ted. __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

10-30-2015, 11:58 AM	#4
SCHUSS 709 RWHP & 677 RWTQ Drives: 13' HPE 800 ZL1..... IOM vert, M6 Join Date: Feb 2013 Location: South Windsor, CT Posts: 1,140	Seeing you guys next week! Street Slayer Twin carbon billet clutch and MGW shifter install. I'll be ready for spring! I know you guys will take good care of me! __________________ 11.34 @ 124.88

10-31-2015, 06:29 AM	#9
alssiri Drives: 2017 ZL1 A10 Join Date: Aug 2009 Location: Dubai Posts: 1,250	Got my HeartBeat installed , thanks Ted Ahmad __________________ 2017 ZL1 A10 SW (SOLD) Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER.

11-03-2015, 03:40 PM	#11
ram360 Drives: 2012 Camaro ZL1 Join Date: Sep 2015 Location: Pennsylvania Posts: 70	Probably will keep it simple and just add the big gulp kit to the roto fab, intercooler reservoir, maybe headers. Really don't want to mess with the tune/pulley until the warranty is up. __________________ 2012 Summit White ZL1 Manual (M6) #38

10-30-2015, 09:38 AM	#2
Normagene Drives: 2013 Ashen Gray M6 ZL1 Join Date: Sep 2012 Location: South Eastern, Mass Posts: 2,615 View My Garage	Hi, I'm look'n for a fabrication shop. Thinking of doing front fender vents. I know they sell the plastic inserts, and you do have to cut a big hole, but I'd rather have it fabricated/seamless so there are no seams/gaps. Not sure if you can recommend a shop in the S.E. Mass area that does this kinda work. Was talkn w/a guy from Florida who had a fab shop do his, look great. Cost a lot more, but it's sheet metal vs plastic/resin. Here's a pic, and if it's too expensive I'll probably go plastic. $200 unfinished and $340 painted/finished. I know it's not a racing mod, but I figured you guys must know everyone in the business and could recommend a reliable source. Thanks

10-30-2015, 11:31 AM	#3
robrocketanski Drives: ZL1 Convertible Auto Join Date: Apr 2015 Location: Macomb, Michigan Posts: 330	JRE 125 A few weeks after our first baby is born. Not sure how this is going to go but I am sure it will be fine

10-30-2015, 08:55 PM	#8
Chrispy 11.91 ET Bone stock Drives: 2015 Camaro ZL1 Join Date: Nov 2014 Location: Canada Posts: 353	Drag radials for me in the spring and hopefully 11.70's. After that will look at your 10% pulley / tune with the stock airbox and a coolant reservoir. (Big 3 looks awesome) I prefer the car to look like stock under the hood.