10-07-2009, 09:29 AM | #1 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2009
Location: Myerstown, PA
Posts: 26
|
1,000 HP Extreme Duty Rear Axles and CV Joints Package
1,000 HP Extreme Duty Rear Axles and CV Joints Package These Extreme-Duty axles for the 2010+ Chevrolet Camaro SS are designed to handle up to 1,000 HP! Using chrome moly center bars, 108mm Porsche style CV's and bolt on chrome moly inner and outer stubs, these are a direct bolt on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, they use different diameter chrome moly axle bars on each side which will eliminate wheel hop. Wheel hop at launch can be extremely damaging to the drivetrain and makes getting traction very difficult. The factory Camaro axles are made with different diameter axle bars, but the spline diameter is the same on both sides and the large diameter axle bar tapers down to a spline that is half the diameter. This transition creates a weak point on the axle bar that cannot withstand increased horsepower. Our axles are made with 1-1/8” & 1-3/8” diameter bars that are splined on the full diameter of the bar, without being tapered down so drastically and creating a weak point (see the photo that shows our extreme duty axles: stock axle bar on left and extreme-duty axle bar on right). These axles and CV joints are priced as a complete set and have a 1 year warranty. For more information and online ordering click here. Last edited by SpohnPerformance; 10-14-2009 at 11:07 AM. |
10-07-2009, 09:32 AM | #2 |
Drives: The Imperial Army Join Date: Feb 2009
Location: The Darkside
Posts: 15,742
|
Good stuff
|
10-07-2009, 09:58 AM | #3 |
i guess this just means i need a 1000HP
|
|
10-07-2009, 10:17 AM | #4 |
Okie doke
|
Very nice !!! I would have felt a lot more confident had I had these last week .. LOL
Crowley
__________________
|
10-07-2009, 10:31 AM | #5 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2009
Location: Myerstown, PA
Posts: 26
|
I know this is a big ticket item. We could do a Group Buy if there is interest. We would need 5 or more orders and we could knock 10% off the price.
Thanks, Steve |
10-11-2009, 08:11 PM | #6 |
Drives: Red Jewel Tintcoat 2SS/RS Join Date: Sep 2009
Location: Oklahoma
Posts: 485
|
How much are we talking? Went to the website and couldn't find anything for the 2010's.
__________________
2010 Red Jewel Tintcoat 2SS/RS, Black Rally Stripes, Black Interior, M6, Sunroof, 20" Polished Wheels, Solo Mach-X Cat Back Exhaust, Blacked Out Bowties
Got screwed by original dealer in Eufuala, Oklahoma on November 3, 2009. Found new one at Paddock Chevrolet and drove 2400 miles roundtrip to pick her up in Buffalo, New York on Nov. 5, 2009. |
10-11-2009, 11:10 PM | #7 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
So how many HP can the stock center section handle?
|
10-12-2009, 07:43 AM | #8 | |
Drives: 2010 Camaro SS/RS Join Date: Mar 2009
Location: Myerstown, PA
Posts: 26
|
Quote:
|
|
10-17-2009, 07:48 AM | #9 |
Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
|
10-17-2009, 05:37 PM | #10 |
Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
I would be interested as well.
__________________
'10 CTS-V : LPE 650+ Package 587hp / 582tq
2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI |
10-18-2009, 04:47 PM | #11 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2009
Location: Myerstown, PA
Posts: 26
|
|
10-18-2009, 07:49 PM | #12 |
Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
Sounds great!! Let's go boys - I know there's more out there that need these axles...
__________________
'10 CTS-V : LPE 650+ Package 587hp / 582tq
2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI |
10-18-2009, 09:00 PM | #13 |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
are these axles staggered in size to help reduce wheel hop?
|
10-18-2009, 09:05 PM | #14 |
Drives: 2010 2SS/RS M6 IOM and Black/IOM Join Date: Jul 2009
Location: Phoenix
Posts: 152
|
Count me in for a set. I will be pushing those numbers next Feb/March. First SEMA then phase 2.
|
|
|
|
|