|
View Poll Results: T Tops or Carbon Fiber? | |||
T Tops | 14 | 73.68% | |
Carbon Fiber Conversion (Fenders, doors, etc) | 5 | 26.32% | |
Voters: 19. You may not vote on this poll |
|
Thread Tools |
01-10-2012, 11:36 PM | #575 |
|
Love the Sparco seats! How much weight do you think it took off?
__________________
2013 Mustang GT Black M6
|
01-11-2012, 01:07 PM | #576 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Thanks! The Sparco seats weigh 19 lbs ea. I believe the stock seats weigh 50-60lbs ea so about 40-50 lbs of weight was saved.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
01-11-2012, 01:08 PM | #577 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Car went in last night and will be getting dynotuned today and will get tow hooks installed as well. We have been having some issues with the fuel pump and will be swapping it out as well.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
01-11-2012, 06:08 PM | #578 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Getting the car ready for its first dyno after the evil twins
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
01-11-2012, 06:15 PM | #579 |
Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009
Location: Bowling Green, Ky
Posts: 3,355
|
And the result???????????
__________________
|
01-11-2012, 06:25 PM | #580 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
car only went on for 10 mins
made over 700whp in top of 3rd and bottom of 4th and then started running lean; we'll put a new fuel pump in it on monday (the eliminatior) and make another pull next week. The car should go over 800 once we get the new fuel pump in.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
01-11-2012, 08:21 PM | #581 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Hay you have no holes in that diffuser, LOL looking good man.
|
01-11-2012, 09:20 PM | #582 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
|
01-11-2012, 10:24 PM | #583 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Here's a vid of my dyno run. As stated above, the car started running lean at 4500rpms so we let off and were not able to reach full power or boost.
We hit 700 @ 4500rpms which is really good. Keep in mind this is on 91 octane gas, low boost, and no methanol. At full boost we should be over 800whp , figure in switching to 110 octane, tuning in methanol for power and the numbers are unimaginable. I'll also be adding the OZMO Engineering Carbon Fiber Intake Manifold which will further boost my power levels. Car is scheduled to get dynoed again and we'll leave it there until I get a better feel for the car. If everything goes well I plan on doing AutoX with the SoCal family and streets of willow track day on sunday. The carbon fiber radiator shroud arrived today as well and will be getting installed shortly!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims Last edited by pyr0b0y; 01-11-2012 at 10:44 PM. |
01-11-2012, 10:26 PM | #584 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
I decided to get a diffuser where the exhaust holes were filled in because I'm running turndowns rather than mufflers
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
01-12-2012, 12:40 PM | #585 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Car's getting dynoed today; planning on running AutoX this saturday and Streets of Willow on sunday to see how well the car performs.
Here's a picture of the intake manifold I'm getting from OZMO Engineering. It should be here by the end of the month or early Feb. Only thing that will be different is the carbon fiber will have a smaller weave.
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
01-12-2012, 12:45 PM | #586 | |
Drives: 2010 ABM RS 2LT Join Date: Nov 2010
Location: San Jose, CA / Bay Area
Posts: 411
|
Quote:
Get those cameras ready mister! :P fun fun fun, I'll keep the fingers and toes crossed you don't need a tow while away!
__________________
I GOT MY CAMARO FOR MY SIG.!!!! AT LAST!!!
Built: October 2010 / ABM Chevy Camaro RS 2LT Grey/Ebony Leather Interior / 6-Speed Manual Trans. Gauge Cluster / Silver Rally Stripes (May remove?) 20" Polished Aluminum Rims. K&N Cold-Air Intake / Corsa Exhaust. |
|
01-12-2012, 02:07 PM | #587 | |
Drives: Camaro GT Join Date: Dec 2009
Location: Charlotte
Posts: 723
|
Quote:
|
|
01-12-2012, 02:10 PM | #588 | |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
Quote:
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
|
|
|
Tags |
carbon fiber intake, goldrush rally 4, the neighbor hater, tron camaro, twin turbo |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
3rd Gen Camaro Street Stock build thread (dialup beware) | zlathim | 3rd Generation Camaros | 9 | 12-06-2018 10:30 AM |
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] | GTAHVIT | Member Car Journals | 5217 | 06-27-2016 08:14 AM |
Do you want the Z28? | ChrisB | Camaro ZL1 Forum - ZL1 Specific Topics | 1616 | 09-04-2010 11:49 PM |
Anyone in St. Louis want a black SS March build Camaro | Sean_W | Camaro Price | Ordering | Tracking | Dealers Discussions | 11 | 03-08-2009 01:31 PM |