02-27-2013, 11:59 PM | #1 |
Drives: 2011 CAMARO SS Join Date: Jan 2011
Location: Hayward Ca
Posts: 24
|
Help on Sway bars problem
I install BMR front and rear sway bars on my SS M6 camaro a few months ago.
And I have been hearing a noise just like a metal being stretch every time i steer the steering wheel. I'm thinking it might be from the end link since i did not replace the original. Does anyone have the same issue as i have? |
02-28-2013, 12:57 AM | #2 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
well... while i can't say i know what metal stretching sounds like.. when i put on my sway bars i didn't get the bolt on the front right tight enough because i didn't have an impact... tech at the dealer drove it.. put it up on the lift.. hit the nut with an impact, and the noise was gone. hope that helps
__________________
2G1FS1EWXD9163847 |
02-28-2013, 10:02 AM | #3 | |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Quote:
Kyle |
|
03-01-2013, 12:20 AM | #4 |
Drives: 2011 CAMARO SS Join Date: Jan 2011
Location: Hayward Ca
Posts: 24
|
MillerTime thanks for the tip I will try that tomorrow.
|
03-01-2013, 12:28 AM | #5 |
Drives: 2011 CAMARO SS Join Date: Jan 2011
Location: Hayward Ca
Posts: 24
|
Kyle went to the shop today and they tighten everything, mechanic told me it might be coming from front endlink or from bushing from the sway bar. But i will try Millertime advise and see what happens.
|
03-01-2013, 07:03 AM | #6 |
What Kyle said! If you can replicate it it shouldn't be hard to identify. It wouldn't be a bad idea to change those OEM links anyways
|
|
03-01-2013, 09:04 AM | #7 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
No problem, let me know what you figure out and I would be more than happy to help you out in any way I can.
|
|
|
|
|