10-16-2010, 06:53 PM | #1 |
Drives: 2010 Join Date: Sep 2009
Location: Westchester NY
Posts: 990
|
Any vendors make Lower control arm bushings at the Rear Hub Assembly?
The lower control arm bushing that is pressed into the lower hub is the only one I have not changed. It pivots and wiggles so much making it a total PAIN every time your breaking down the suspension to work on.
Does anyone make this part? Please direct me to anyone that does. And if any vendor does can you explain why the OE bushing pivots so much and what drawbacks by going solid over the OE design? |
10-19-2010, 12:56 AM | #2 |
Suspension Specialist
Drives: 2011 Camaro Join Date: Aug 2010
Location: SF Bay Area
Posts: 65
|
The rear lower outer control arm bushing is really not a bushing. It is more like a joint. It is a seriously good unit and would not recommend replacing it.
mike dms |
10-19-2010, 05:15 AM | #3 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
It's a Spherical Bearing not a bushing,
|
10-19-2010, 08:27 PM | #4 |
Drives: 2010 Join Date: Sep 2009
Location: Westchester NY
Posts: 990
|
Thanks for clarifying guys I wasn't sure if hardcore guys replaced them with something solid.
|
10-21-2010, 12:50 PM | #5 |
Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
no need to swap it out. it needs to pivot for the caster/camber/toe adjustments.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Im sure this has been asked before.. But forgive my innocence :) | gmag21 | Suspension / Brakes / Chassis | 23 | 02-21-2010 10:29 PM |
Mustangs................ | vontivonti | 5th Gen Camaro SS LS LT General Discussions | 4052 | 12-21-2009 10:42 PM |
Pfadt Racing Poly Control Arm Bushing Kit | PfadtRacing | Suspension / Chassis / Brakes | 9 | 12-13-2009 12:38 AM |
Detroit Speed vs. Pedders | usmcjlp | Wheels and Tires Talk Sponsored by The Tire Rack | 35 | 07-22-2009 12:14 AM |