Does anybody know what old school SS emblem - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Gangster · 02-22-2011, 09:08 PM

I just ordered a heritage grille and I want to put the old school ss in the middle, I called a buddy who owns a first gen resto shop to order one but Im not sure of the angle of the point. The emblem for 67,68,and 69 all have a different pitch at the point so I was wondering if someone did the foot work and measured and matched them up for the best fit. If not ill post it after I figure it out-thanks

Also, who is the best supplier to order the rear black out and old school ss emblem from? thanks

73camarolt · 02-22-2011, 09:10 PM

Rear black-out will depend if you want gloss black or matte black. If you want a real SS badge, any of them will work. I think you have to bend it alittle either way.

Silver2SSRS6spd · 02-22-2011, 09:13 PM

The rear SS can be purchased from SLP, shipping is steep. If you don't get an answer for the Front, order the one that is in the middle, they bend rather easily if i remember correctly.

jonm38 · 02-22-2011, 09:27 PM

I have the Heritage grill, left the emblem off. I haven't found the right one to fit.

Gangster · 02-22-2011, 09:29 PM

I figure if I cant get someone whos already done this ill just measure the angle and he will check all 3 first gen grilles and send me the closest one. the rear emblem I would think the 69 has to work. Im gonna go with the matte black for the blackout ill check into slp,thanks

SWAT · 02-23-2011, 07:01 AM

Year One has a lot of emblems.

http://www.yearone.com/serverfiles/f...ain2.asp?cat=8

ZED SLED · 02-23-2011, 07:12 AM

SLP has the ols school front one with the landing pad. The landing pad has been the issue with most of them. I made my own last spring to mount an SS from the '07 Impala SS

halo8hkk · 02-23-2011, 08:27 AM

Quote:

Originally Posted by Silver2SSRS6spd

The rear SS can be purchased from SLP, shipping is steep. If you don't get an answer for the Front, order the one that is in the middle, they bend rather easily if i remember correctly.

MattSS · 02-23-2011, 10:08 AM

I used SLP's front and rear, with the SLP blackout in the back. The front badges are bendable and meant to be applied to a hard surface. That said, I just carefully pressed them onto the heritage grille and bent them a bit to get better adhesion. Looks great and matches the ones on the rear. I'm at work now with no pictures handy, but I'll try to get a pic uploaded later.

Gangster · 02-23-2011, 12:39 PM

Thanks, id appreciate it, after looking at all of them I really want to go with the old school emblems.

midnighter · 02-23-2011, 12:43 PM

I left the SS and deleted the

Name: 2010 camaro w-heritage grill.jpg
Views: 2141
Size: 107.3 KB

y2k king · 02-23-2011, 12:49 PM

just bend to fit.

Gangster · 02-23-2011, 10:02 PM

that is sweet y2k! one more question,what are those lamps you installed where the drls used to be? do they match the halos?

crumpcru · 02-23-2011, 10:08 PM

I just ordered one that was for the heritage grill from clean cut creations it was around 38 bucks.

02-22-2011, 09:08 PM	#1
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	Does anybody know what old school SS emblem I just ordered a heritage grille and I want to put the old school ss in the middle, I called a buddy who owns a first gen resto shop to order one but Im not sure of the angle of the point. The emblem for 67,68,and 69 all have a different pitch at the point so I was wondering if someone did the foot work and measured and matched them up for the best fit. If not ill post it after I figure it out-thanks Also, who is the best supplier to order the rear black out and old school ss emblem from? thanks

02-22-2011, 09:10 PM	#2
73camarolt Drives: 2002 Camaro SS Join Date: Feb 2009 Location: Germantown, MD Posts: 2,355 View My Garage	Rear black-out will depend if you want gloss black or matte black. If you want a real SS badge, any of them will work. I think you have to bend it alittle either way. __________________ 2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq

02-22-2011, 09:13 PM	#3
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	The rear SS can be purchased from SLP, shipping is steep. If you don't get an answer for the Front, order the one that is in the middle, they bend rather easily if i remember correctly. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

02-22-2011, 09:27 PM	#4
jonm38 Drives: 2016 Siliverado LT. Camaro SS Join Date: Jul 2009 Location: Brooksville, Florida Posts: 628	I have the Heritage grill, left the emblem off. I haven't found the right one to fit. __________________ *Just Cruising!* USN - 1990 - 1994 2010 Camaro 2SS Red Jewel

02-23-2011, 07:12 AM	#7
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,477 View My Garage	SLP has the ols school front one with the landing pad. The landing pad has been the issue with most of them. I made my own last spring to mount an SS from the '07 Impala SS Attached Images __________________

02-22-2011, 09:29 PM	#5
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	I figure if I cant get someone whos already done this ill just measure the angle and he will check all 3 first gen grilles and send me the closest one. the rear emblem I would think the 69 has to work. Im gonna go with the matte black for the blackout ill check into slp,thanks

02-23-2011, 07:01 AM	#6
SWAT Drives: 2011 2SS RS L99 Join Date: Jan 2011 Location: Grand Rapids, MI Posts: 5,708	Year One has a lot of emblems. http://www.yearone.com/serverfiles/f...ain2.asp?cat=8

02-23-2011, 10:08 AM	#9
MattSS Drives: 2010 2SS/RS A6 CGM Join Date: Jul 2010 Location: Central Illinois Posts: 103	I used SLP's front and rear, with the SLP blackout in the back. The front badges are bendable and meant to be applied to a hard surface. That said, I just carefully pressed them onto the heritage grille and bent them a bit to get better adhesion. Looks great and matches the ones on the rear. I'm at work now with no pictures handy, but I'll try to get a pic uploaded later.

02-23-2011, 12:39 PM	#10
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	Thanks, id appreciate it, after looking at all of them I really want to go with the old school emblems.

02-23-2011, 12:43 PM	#11
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,906	I left the SS and deleted the

02-23-2011, 12:49 PM	#12
y2k king Drives: 2011 ss camaro Join Date: Aug 2010 Location: spring hill, fl Posts: 1,705	just bend to fit. Attached Images __________________ 10/28/2010 got it

02-23-2011, 10:02 PM	#13
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	that is sweet y2k! one more question,what are those lamps you installed where the drls used to be? do they match the halos? Last edited by Gangster; 02-23-2011 at 10:15 PM.

02-23-2011, 10:08 PM	#14
crumpcru Drives: 2011 camaro 2ss/rs Join Date: Feb 2011 Location: kouts, Indiana Posts: 19 View My Garage	I just ordered one that was for the heritage grill from clean cut creations it was around 38 bucks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing Rear Bowtie and SS Emblem....Any Tutorials?	blahzay	Camaro DIY & HOW-TO instructions & discussions	5	06-28-2010 06:24 PM
Removing SS emblem from grill	Kwik	Cosmetics and Lighting Modification Discussions	8	04-09-2010 09:34 AM
SS emblem on speedo cluster	domano 68	5th Gen Camaro SS LS LT General Discussions	3	06-30-2009 09:39 PM