12-14-2013, 09:27 PM | #1 |
Drives: 2012 Rally Yellow 2SS Join Date: Dec 2013
Location: Key West, FL
Posts: 12
|
BMR springs w/ Stock suspension noise ADVICE PLEASE
I have BMR lowering springs 1" drop. I have a BMR sway bar also. The sound coming from the rear is like the sound of having 2 porcelain bowls stacked on each other and when I go over small bumps they raise and rattle for a half second...now I've had an alignment and have been under the car 4 times to re tighten and all that jazz....what I think it is is either the stock shock gave out OR where the shock actually connects to the lower control arm where the bolt goes through is metal on metal....are there any bushings for that or is this normal? I can't find anything related on the forums, though I'm only on 22 ha.
Any feedback is appreciated Thanks guys pat |
12-14-2013, 11:55 PM | #2 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,545
|
Tighten sway bars, check to see if coils are seated.
Shocks going out would not cause those symptoms, its either something loose or the springs. |
12-15-2013, 12:17 AM | #3 |
[COTW 4/13/15]
Drives: Supercharged LLT Join Date: Jul 2010
Location: Florida
Posts: 5,957
|
Could be the end link nut to the control arm, probably just loose.
__________________
|
12-15-2013, 09:13 AM | #4 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
I agree with the other two, something is loose.
|
12-16-2013, 01:58 PM | #5 | |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Quote:
|
|
|
|
|
|