Stabilitrak Issues - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Frankzl1 · 03-11-2014, 10:56 PM

Has anyone experienced this issue? It has happened 3 times in the last 6 months and I haven't seen anything around here with a concrete answer.

Many claimed is the spark plugs, some type of wire that needs insulation, etc...

kaamacat · 03-12-2014, 08:33 AM

What type of issues are you having?

1KillerSS · 03-12-2014, 08:52 AM

Quote:

Originally Posted by kaamacat

What type of issues are you having?

a little more input would be great

I call it Vera · 03-12-2014, 09:47 AM

Definitely not clear what your issue is . . .

Stabilitrack will engage if you are about to spin the rear end out from under you.
It engages by cutting power from the engine, preventing said embarrassing spin out.
Is that your issue?

2doorrocket · 03-12-2014, 10:45 AM

If you have the service stabilitrack it means either A - you're misfiring (this has happened to me after installing headers, the metal end of the cable had popped out of the cable and was arc-ing all over the place. B - you put it on a dyno and one of the ADCM rods snapped, now it can't detect the road.

Modern07 · 03-12-2014, 11:12 AM

I had service stabilitrack light up on the dash and a noticeable drop in power when running it hard 3rd gear to 4th gear a couple of months back and threw the "Random Multiple Misfire" code - that turned out to be a collapsed Hi Flow Cat and I'm now running without cats with no issues.

Could also be related to MAF sensor, or spark plugs though

Frankzl1 · 03-15-2014, 09:28 AM

Quote:

Originally Posted by Modern07

I had service stabilitrack light up on the dash and a noticeable drop in power when running it hard 3rd gear to 4th gear a couple of months back and threw the "Random Multiple Misfire" code - that turned out to be a collapsed Hi Flow Cat and I'm now running without cats with no issues.

Could also be related to MAF sensor, or spark plugs though

Sorry guys it took my a while to answer, but the symptoms are exactly to the ones described by Modern07. I will look into this and will let you know.

Thanks!!

03-11-2014, 10:56 PM	#1
Frankzl1 Drives: 2012 Ashen ZL1 Join Date: Nov 2011 Location: Miami Posts: 552	Stabilitrak Issues Has anyone experienced this issue? It has happened 3 times in the last 6 months and I haven't seen anything around here with a concrete answer. Many claimed is the spark plugs, some type of wire that needs insulation, etc...

03-12-2014, 08:33 AM	#2
kaamacat Drives: 2018 ZL1/1LE Red Join Date: Oct 2013 Location: Cumming, GA Posts: 321	What type of issues are you having? __________________ BobR 2018 ZL1 1LE (Red) - New Dec 2017 2015 ViperGT (Gunmetal w/Red stripes) 2013 ZR1 Anniversary 2014 ZL1 - BrightYellow, 6sp 2011 Porsche GT3RS - White w/red graphics 2009 Porsche C2S 2001 Ferrari 360

03-12-2014, 11:12 AM	#6
Modern07 Mid-Florida Camaro Club Drives: 2019 ZL1 on Order Join Date: Jan 2011 Location: Heathrow, FL Posts: 3,136	I had service stabilitrack light up on the dash and a noticeable drop in power when running it hard 3rd gear to 4th gear a couple of months back and threw the "Random Multiple Misfire" code - that turned out to be a collapsed Hi Flow Cat and I'm now running without cats with no issues. Could also be related to MAF sensor, or spark plugs though __________________ My Build Thread

03-12-2014, 09:47 AM	#4
I call it Vera Drives: ZL1 Convertible Join Date: Aug 2012 Location: Chicago, IL Posts: 484	Definitely not clear what your issue is . . . Stabilitrack will engage if you are about to spin the rear end out from under you. It engages by cutting power from the engine, preventing said embarrassing spin out. Is that your issue?

03-12-2014, 10:45 AM	#5
2doorrocket Drives: Gas Guzzlers Join Date: Feb 2014 Location: San Diego, CA Posts: 168	If you have the service stabilitrack it means either A - you're misfiring (this has happened to me after installing headers, the metal end of the cable had popped out of the cable and was arc-ing all over the place. B - you put it on a dyno and one of the ADCM rods snapped, now it can't detect the road.