Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ADM PERFORMANCE
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6


Reply
 
Thread Tools
Old 06-26-2013, 11:59 AM   #575
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
Quote:
Originally Posted by tonymac View Post
What pieces did you get? I am looking to do this as well, but was unsure what was needed vs what came with the kit we are buying.
Dan charged me 26.58 for a disk and fitting...If u used braided line instead of the hard down tube you will need a 90 degree fitting and braided line for that part. I am thinking its #8 line, but not 100% sure til i get the fitting from Dan.
Best bet is call Dan and tell him u want the same bottle blow off parts you sold Ben. If u do want to run the tube it would be a kit 120011 for $55. Reason i didnt go with the tube and will use braided line is i am not 100% sure there is enough room for the tube where i plan to mount the bottle as the braided line is flexible.
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
Old 06-26-2013, 01:05 PM   #576
mercraus
It doesn't mean anything
 
Drives: 2011 Camaro LS
Join Date: Jul 2012
Location: Wadsworth, Ohio
Posts: 85
I added the Remote Opener and full Blowby Kit too. I actually live pretty close to them and will be picking-up my order today! I can take some pictures while I'm there if anyone is interested.
__________________
Hmmmm..... I should probably get a fancy sig
mercraus is offline   Reply With Quote
Old 06-26-2013, 01:08 PM   #577
PoorMansCamaro



 
PoorMansCamaro's Avatar
 
Drives: Really Slow
Join Date: Apr 2010
Location: Las Vegas
Posts: 55,718
Quote:
Originally Posted by mercraus View Post
I added the Remote Opener and full Blowby Kit too. I actually live pretty close to them and will be picking-up my order today! I can take some pictures while I'm there if anyone is interested.
YES YES YES!!!!


and I think ours is going to be shipped july 8th.
__________________
PoorMansCamaro is offline   Reply With Quote
Old 06-26-2013, 01:28 PM   #578
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
Quote:
Originally Posted by mercraus View Post
I added the Remote Opener and full Blowby Kit too. I actually live pretty close to them and will be picking-up my order today! I can take some pictures while I'm there if anyone is interested.
Nice...Where do u plan to mount the bottle? I am hoping to mount mine on right side of trunk. Is Dan installing it for you? I asked him if the price included installation If it were winter up there he probably do it.
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
Old 06-26-2013, 01:30 PM   #579
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
My next mod after or before getting this installed will be a trans cooler. My service writer at the local dealer thought it would be a good idea as well. I have a spare one form my 67 i plan to use.
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
Old 06-26-2013, 01:31 PM   #580
mercraus
It doesn't mean anything
 
Drives: 2011 Camaro LS
Join Date: Jul 2012
Location: Wadsworth, Ohio
Posts: 85
Quote:
Originally Posted by IneedAZ View Post
Nice...Where do u plan to mount the bottle? I am hoping to mount mine on right side of trunk. Is Dan installing it for you? I asked him if the price included installation If it were winter up there he probably do it.
Haven't decided on mounting yet, definitely somewhere stealth though. Going to get it installed at a shop closer to my house after I finish a few other installs.
__________________
Hmmmm..... I should probably get a fancy sig
mercraus is offline   Reply With Quote
Old 06-26-2013, 01:34 PM   #581
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
Curious, some of you guys mentioned getting an AFR gauge and wanted to know why? Do u have a means of changing it?
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
Old 06-26-2013, 01:42 PM   #582
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
Also forgot to ask, are those like me that are buying the bottle opener, are you buying a remote gauge? Or will your switch have a light as a reminder that its open?
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
Old 06-26-2013, 01:46 PM   #583
PoorMansCamaro



 
PoorMansCamaro's Avatar
 
Drives: Really Slow
Join Date: Apr 2010
Location: Las Vegas
Posts: 55,718
Quote:
Originally Posted by IneedAZ View Post
Curious, some of you guys mentioned getting an AFR gauge and wanted to know why? Do u have a means of changing it?
yes, by changing jet sizes. they have a chart for what kind of shot you want to run. but I think that's more for a starting point. I remember having the zex system and compared my jets to someone else with the same kit, and they were a little different in sizes, to get the same shot. I think DA has a lot to do with why people use different jet sizes.
__________________
PoorMansCamaro is offline   Reply With Quote
Old 06-26-2013, 01:49 PM   #584
PoorMansCamaro



 
PoorMansCamaro's Avatar
 
Drives: Really Slow
Join Date: Apr 2010
Location: Las Vegas
Posts: 55,718
Quote:
Originally Posted by IneedAZ View Post
Also forgot to ask, are those like me that are buying the bottle opener, are you buying a remote gauge? Or will your switch have a light as a reminder that its open?
we plan on having a remote opener and remote gauge, but that might be later down the road. if we had the remote opener only, then the way I would remember that the bottle is closed, is that after every use, I always purge out the line. you have to close the bottle to purge out the line. so you know it's closed.
__________________
PoorMansCamaro is offline   Reply With Quote
Old 06-26-2013, 01:53 PM   #585
h2oplay
Winners find a way
 
h2oplay's Avatar
 
Drives: 2010 2LT/RS M6
Join Date: Jun 2010
Location: NE Ohio
Posts: 1,137
Quote:
Originally Posted by mercraus View Post
Haven't decided on mounting yet, definitely somewhere stealth though. Going to get it installed at a shop closer to my house after I finish a few other installs.

May I suggest mounting it to your spare tire/battery cover, that way, there are no holes to drill into the trunk floor, wish I had done that....
__________________
Injen LT | Magnaflows | BBK LT & HFC | Mace 25mm & P Spacer |Richmond 3.73 | Trifecta Tune
RX Catch Can & Breather | Pedders Inserts | IDEALG Clutch MC & GTO Reservoir | JDP Colorshift Halos | Drake Bowtie Delete |
h2oplay is offline   Reply With Quote
Old 06-26-2013, 02:06 PM   #586
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
Quote:
Originally Posted by h2oplay View Post
May I suggest mounting it to your spare tire/battery cover, that way, there are no holes to drill into the trunk floor, wish I had done that....
I would think i would have to reinforce it though. I will still have to drill a hole for the blow down hose unfortunately.
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
Old 06-26-2013, 02:07 PM   #587
PoorMansCamaro



 
PoorMansCamaro's Avatar
 
Drives: Really Slow
Join Date: Apr 2010
Location: Las Vegas
Posts: 55,718
still need to decide what plugs to use. lol
__________________
PoorMansCamaro is offline   Reply With Quote
Old 06-26-2013, 02:11 PM   #588
IneedAZ


 
IneedAZ's Avatar
 
Drives: 2017 ZL1 A10 & 2012 2LT RS
Join Date: Mar 2009
Location: Tampa
Posts: 3,603
Quote:
Originally Posted by PoorMansCamaro View Post
we plan on having a remote opener and remote gauge, but that might be later down the road. if we had the remote opener only, then the way I would remember that the bottle is closed, is that after every use, I always purge out the line. you have to close the bottle to purge out the line. so you know it's closed.
I am having a hard time deciding on nitrous outlet or emblem pros switches. Looking at the switches, i was thinking of using the switch with the led for the opener not the heater so i can tell when its open by a glance. Unless i use a NOS gauge in the cockpit to remind me i have the bottle open.
__________________
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup

2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
IneedAZ is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.