Need help finding a radiator shroud that will work with my CAI tube... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Maro99 · 03-20-2010, 02:34 AM

I just ordered some covers to get airbrushed to match the theme I have going for my engine cover and have not been able to find a radiator cover to specifically go with my cold air inductions CAI. I have been looking at the rotofab radiator cover that looks like it may fit but im not sure.. Below is a pic of my setup and a pic of the rotofab shroud. Do you think that will work with my CAI tube? Does anyone know of a shroud that will work specifically with my setup? Any help is appreciated, Thanks

CamaroDreams07 · 03-20-2010, 03:22 AM

I think that would be fine. Looks like the cutout would be far enough back. Hard to tell with just pictures though.

IMO it looks better without one..but that's not really the point so I'll zip it.

Maro99 · 03-20-2010, 11:15 AM

Quote:

Originally Posted by CamaroDreams07

I think that would be fine. Looks like the cutout would be far enough back. Hard to tell with just pictures though.

IMO it looks better without one..but that's not really the point so I'll zip it.

Yeah looks good to me to but I would hate to spend the money just to find out it dosent fit.. Thanks.

Anyone else?

buzzy56 · 03-20-2010, 03:14 PM

Quote:

Originally Posted by Maro99

I just ordered some covers to get airbrushed to match the theme I have going for my engine cover and have not been able to find a radiator cover to specifically go with my cold air inductions CAI. I have been looking at the rotofab radiator cover that looks like it may fit but im not sure.. Below is a pic of my setup and a pic of the rotofab shroud. Do you think that will work with my CAI tube? Does anyone know of a shroud that will work specifically with my setup? Any help is appreciated, Thanks

What can I say but WOW! Saw your earlier progress at initial start of air brush.This is the first time that I have seen the end result.Super job cannot say enough.Very artistic to say the least.

Gotthat02fire · 03-20-2010, 11:06 PM

I would call Roto-fab and see there kit is close to CAI's intake check it out or you can check with showstoppers!!!! Hope that helps!!

Dangeruss · 03-21-2010, 12:46 AM

PM Pete at Showstopper. He can do just about anything you want. He's a great guy to deal with and does some quality work.

tjmac49 · 03-21-2010, 02:16 AM

Maro99: That paint looks GREAT!!! Please post if Roto-Fab piece works with your CAI.

Maro99 · 03-22-2010, 08:51 AM

Quote:

Originally Posted by buzzy56

What can I say but WOW! Saw your earlier progress at initial start of air brush.This is the first time that I have seen the end result.Super job cannot say enough.Very artistic to say the least.

Quote:

Originally Posted by Gotthat02fire

I would call Roto-fab and see there kit is close to CAI's intake check it out or you can check with showstoppers!!!! Hope that helps!!

Thanks,

.

Quote:

Originally Posted by Dangeruss

PM Pete at Showstopper. He can do just about anything you want. He's a great guy to deal with and does some quality work.

I sent him a couple of pm's about it but he hasnt gotten back to me yet. Thanks

Quote:

Originally Posted by tjmac49

Maro99: That paint looks GREAT!!! Please post if Roto-Fab piece works with your CAI.

I will thanks.

Dangeruss · 03-22-2010, 09:35 AM

Quote:

Originally Posted by Maro99

I sent him a couple of pm's about it but he hasnt gotten back to me yet.

I'm sure he'll get with you soon. I know he told me he's going crazy right now getting things ready for C5Fest.

Maro99 · 03-22-2010, 10:08 AM

Quote:

Originally Posted by Dangeruss

I'm sure he'll get with you soon. I know he told me he's going crazy right now getting things ready for C5Fest.

Dan@showstoppers just sent me back a PM.. Thanks

03-20-2010, 02:34 AM	#1
Maro99 Drives: Heel toe express.. Join Date: Dec 2009 Location: North Charleston, S.C Posts: 1,500	Need help finding a radiator shroud that will work with my CAI tube... I just ordered some covers to get airbrushed to match the theme I have going for my engine cover and have not been able to find a radiator cover to specifically go with my cold air inductions CAI. I have been looking at the rotofab radiator cover that looks like it may fit but im not sure.. Below is a pic of my setup and a pic of the rotofab shroud. Do you think that will work with my CAI tube? Does anyone know of a shroud that will work specifically with my setup? Any help is appreciated, Thanks Last edited by Maro99; 03-20-2010 at 03:40 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom airbrush work under hood... MUST SEE THIS!!	Maro99	Cosmetics and Lighting Modification Discussions	106	05-12-2013 07:05 AM
This site is like crack. You know you're addicted to Camaro5 when...	GameOver620	5th Gen Camaro SS LS LT General Discussions	463	01-03-2011 02:28 PM
Roto-fab CAI, a closer look...	Roto-fab 1	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	87	09-29-2010 07:28 AM
List of Intakes that will work with the TVS-2300 MagnaCharger	JJ2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	26	03-19-2010 02:11 AM
Vararam CAI, Will it Work with a Maggie?	rpepka	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	4	08-10-2009 10:22 AM

03-20-2010, 03:22 AM	#2
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	I think that would be fine. Looks like the cutout would be far enough back. Hard to tell with just pictures though. IMO it looks better without one..but that's not really the point so I'll zip it.

03-20-2010, 11:06 PM	#5
Gotthat02fire Drives: 2010 Camaro 1ss IOM Join Date: May 2009 Location: Williamsport,PA Posts: 2,246 View My Garage	I would call Roto-fab and see there kit is close to CAI's intake check it out or you can check with showstoppers!!!! Hope that helps!!

03-21-2010, 12:46 AM	#6
Dangeruss Bayoucitymusclecars.com Drives: Camaro LSX Join Date: Jul 2009 Location: Spring, TX Posts: 4,413 View My Garage	PM Pete at Showstopper. He can do just about anything you want. He's a great guy to deal with and does some quality work.

03-21-2010, 02:16 AM	#7
tjmac49 Drives: 2010 Camaro SS/RS, IBM, L99 Join Date: Jan 2010 Location: Lafayette, LA Posts: 365	Maro99: That paint looks GREAT!!! Please post if Roto-Fab piece works with your CAI.