09-03-2012, 11:45 AM | #1 |
Drives: RY 2LT/RS Join Date: Jul 2009
Location: Niagara Falls ONT.
Posts: 457
|
Removing rotors quick help plz
Whats the easiest way to do it there being a pain in the ass to take off? It's ready to pop off I think it's just a little rusted and the torque screw is out
|
09-03-2012, 12:16 PM | #2 |
Drives: 2010 Camaro SS/RS Join Date: Aug 2011
Location: AZ
Posts: 190
|
If there are any round clips on the studs make sure that they are removed, then wack w/ a heavy rubber mallet... left side right side, top then bottom...
__________________
19 GMC CC 4x4 2019 Harley RGS |
09-03-2012, 12:32 PM | #3 |
Drives: RY 2LT/RS Join Date: Jul 2009
Location: Niagara Falls ONT.
Posts: 457
|
Thanks one more question, the pads sit in metal sliders can I rip those off to paint the calipers or should I leave them on. I feel I would damage them if I tried to take them off
|
09-03-2012, 12:43 PM | #4 |
|
Take it off you get a better cleaning and a better paint covering then to mask everything off
|
09-03-2012, 12:46 PM | #5 |
Drives: RY 2LT/RS Join Date: Jul 2009
Location: Niagara Falls ONT.
Posts: 457
|
Thanks. Soo... As I was taking out the torque screw for the front the screw sheared itself in 2 whats my best option for now? Is it ok to put back together without it?
|
|
|
Thread Tools | |
|
|