Heritage Grill, stock emblems ??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

del-boy · 08-10-2011, 12:08 PM

Hey guys.... does anyone know how to fix the stock emblems on a Heritage grill? (bowtie and SS)

i appreciate the advice peeps!

thanks.

justjeff52 · 08-10-2011, 03:20 PM

My dealer installed my bowtie back on my Heritage and when I replaced it with an aftermarket SS emblem the bowtie was just bolted on, the small SS emblem i believe has to be stuck back on with a 3M type tape.

Darth_Emma · 08-10-2011, 03:40 PM

I am not quite sure what you mean, OP. I have a Heritage grill and it came with the bowtie. There is a backing plate that the bowtie clips in to. If you don't have that backing plate, you can buy it from Phastek: http://www.phastekperformance.com/20...grille-pad.htm

I took the Bowtie off and bought billet SS emblems to replace it. You can get the SS emblems from Sparks Restorations.

I did not attach the small red SS emblem to my Heritage Grill. I know some guys who have though, but I think it takes some ingenuity to do it.

This is my Heritage Grill with the SS emblem from Sparks Restoration. Mine is black, but you can get them in different colors.

nak3dsnake · 08-10-2011, 04:43 PM

Quote:

Originally Posted by del-boy

Hey guys.... does anyone know how to fix the stock emblems on a Heritage grill? (bowtie and SS)

i appreciate the advice peeps!

thanks.

For the bowtie, here's the part numbers for the bracket.

Base - 20964094
Backing plate - 20964093
Nut (2) - 11610157
Screw (2) - 11609828

For the SS emblem you can trim it down with a dremel until it fits in the grille and zip tie it in like i did.

del-boy · 08-10-2011, 05:33 PM

cool, where did you get the parts from?

thanks!

nak3dsnake · 08-10-2011, 07:21 PM

Quote:

Originally Posted by del-boy

cool, where did you get the parts from?

thanks!

gmpartsdirect.com

sscamaro · 08-11-2011, 09:55 AM

Clean Cut Creations has clips to put the original bow tie on the Heritage grille. They also have the SS or RS with pressue sensitive tape on it.

08-10-2011, 12:08 PM	#1
del-boy "Grumble Bee" Drives: Cyber Grey Camaro SS/RS Join Date: Jun 2011 Location: Doha, Qatar Posts: 163 View My Garage	Heritage Grill, stock emblems ??? Hey guys.... does anyone know how to fix the stock emblems on a Heritage grill? (bowtie and SS) i appreciate the advice peeps! thanks. __________________

08-10-2011, 05:33 PM	#5
del-boy "Grumble Bee" Drives: Cyber Grey Camaro SS/RS Join Date: Jun 2011 Location: Doha, Qatar Posts: 163 View My Garage	cool, where did you get the parts from? thanks! __________________

08-11-2011, 09:55 AM	#7
sscamaro Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007 Location: Denver,PA Posts: 3,195 View My Garage	Clean Cut Creations has clips to put the original bow tie on the Heritage grille. They also have the SS or RS with pressue sensitive tape on it. __________________ 2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Ever DOUBLE DIN (monitor / screen) NO LONGER AVAILABLE****	Hess RS	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	992	06-12-2013 11:13 PM
Heritage Grill Dilemna	DevilsReject97	Cosmetics and Lighting Modification Discussions	44	05-20-2011 10:34 AM
Modern SS emblems on a heritage grill?	CDN SS	Cosmetics and Lighting Modification Discussions	28	05-14-2011 10:37 PM
Heritage Grill paint ideas	aaranzabal	Cosmetics and Lighting Modification Discussions	1	04-24-2011 11:52 PM
Who lost the bowtie off their Heritage grill?	2010SSRSM6	USA - California	15	01-02-2011 05:08 PM

08-10-2011, 03:20 PM	#2
justjeff52 Drives: 2011 Black 2SS/RS Join Date: Feb 2011 Location: Catskill, NY Posts: 73 View My Garage	My dealer installed my bowtie back on my Heritage and when I replaced it with an aftermarket SS emblem the bowtie was just bolted on, the small SS emblem i believe has to be stuck back on with a 3M type tape.

08-10-2011, 03:40 PM	#3
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	I am not quite sure what you mean, OP. I have a Heritage grill and it came with the bowtie. There is a backing plate that the bowtie clips in to. If you don't have that backing plate, you can buy it from Phastek: http://www.phastekperformance.com/20...grille-pad.htm I took the Bowtie off and bought billet SS emblems to replace it. You can get the SS emblems from Sparks Restorations. I did not attach the small red SS emblem to my Heritage Grill. I know some guys who have though, but I think it takes some ingenuity to do it. This is my Heritage Grill with the SS emblem from Sparks Restoration. Mine is black, but you can get them in different colors.