08-16-2014, 12:43 PM | #1 |
|
1" Lowering Springs
Out of the most popular 1" lowering springs (BMR, Hotchkis, Eibach), which ones are known to lower a SS the least? I know they all are labeled 1", but I have seen some photos of cars that look lower than others when they both have 1" springs.
__________________
|
08-16-2014, 09:51 PM | #2 |
Drives: 2010 2ss Join Date: Dec 2012
Location: san antonio
Posts: 62
|
i'd like to know as well.
__________________
2010 l99 summit white w/inferno orange stripes and interior. Texas Speed longtubes, halltech cold air intake,v-max ported throttle body, MSD wires, NGK plugs, Spintech catback with x-pipe, GPI SS1 VVT camshaft.
|
08-16-2014, 10:25 PM | #3 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
I have the BMR's and it lowered 1" -- and the height is perfect for the 2011 2SS I have... I measured before and after and its right @ 1" front and rear...
|
08-17-2014, 06:09 AM | #4 |
|
Thanks for the reply hammdo. I have been looking at photos for a few days and all the cars with the Hotchkis 1" springs seem to have the look I want. I have noticed that the cars with BMR springs look a little lower than Eibach & Hotchkis, and saw a post where BMR stated that their springs will lower the car a little bit lower.
__________________
|
08-17-2014, 06:11 AM | #5 |
Drives: 2013 1SS Camaro and a truck Join Date: Apr 2011
Location: San Antonio,TX
Posts: 1,081
|
Wondering the same thing
|
08-17-2014, 08:43 AM | #6 |
Drives: 2015 Camaro SS Join Date: Sep 2011
Location: Jacksonville, Fl
Posts: 713
|
I measured my BMR before and after and the result was 1" as advertised......
__________________
2015 Camaro 2SS Cam/Heads/FBO 498/447 SAE |
08-17-2014, 11:25 AM | #7 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,288
|
When I had Hotchkis on my 2012 it lowered the front 1" and the rear 3/4".
|
08-17-2014, 06:02 PM | #8 |
Drives: 2012 2SS/RS M6 Join Date: Mar 2014
Location: kannapolis, nc
Posts: 378
|
does installing new springs void the warranty? How much are you guys paying to have them installed?
|
08-18-2014, 05:48 PM | #9 | |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Of the 1" variety, the Hotchkis springs will lower the least and also offer the best ride in my opinion. BMR is a very close second.
Quote:
Best regards, Tyler 888-308-6007 |
|
08-18-2014, 06:05 PM | #10 |
Drives: 2011 Camaro 2SS/RS LS3 Join Date: Aug 2013
Location: Tampa Bay
Posts: 812
|
extremely happy with my 1" BMR drops. they were pretty much spot on.
__________________
2015 Silverado Z71 6.2/2011 Camaro 2SSRS LS3/2014 Cadillac ATS 2.0T
|
08-18-2014, 06:08 PM | #11 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
1.2 bmr before and after on a V6
__________________
|
|
|
|
|