IPS TT Kit -- 795HP on STOCK LS3!! - Page 22 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

IPSjeff · 02-01-2013, 07:25 AM

Quote:

Originally Posted by Medi0cr3

What size mm are these turbos. I'm kinda getting into turbos learning more about them. I've well researched superchargers, however I'm impressed with the usability and easy of turbos as well. I've read the Garrett site for the how to and it is very informational. I couldn't really pin point a size. I only understand the compressor and turbine A/R. I noticed TiAL 1.03 housings and that's about all I can tell lol...

Thanks in advance!

Looking at doing a 402 ly6 4th gen and your turbo kit.

Which ones?
We most commonly use the GT3582 and GT3586 turbos with the kit. The new "Big" option is the GT3794. Depending on which you are interested in you can check into it for more info / stats.
Jeff

atomicfusion · 02-01-2013, 08:10 AM

Quote:

Originally Posted by nbrigdan

I was looking at the pricing info on the site, what exactly is the $1300 "Engine Cooler"?
And also, is the 6" intercooler really necessary for 800hp? Seems like that's a little overkill, no?

The Engine Cooler was a misprint... it is actually Engine Oil Cooler... it has been corrected.

But it is an external egine oil cooler that will help keep temps down even more.

Medi0cr3 · 03-13-2013, 05:42 AM

how much rwhp would you expect on the 35's with 8psi? Supporting mods: camshaft, ported heads

Z_Rocks · 03-13-2013, 08:59 AM

Quote:

Originally Posted by IPSjeff

People can voice opinions on turbos all day long but for my money I would take a genuine Garrett over anything else on the market. Whether we install them on a daily-driven Camaro or Mark's 2800HP Z06, they are stupid reliable and just work.
Jeff

I agree with Jeff 1000% on the Garrett turbos.

axis · 03-13-2013, 02:08 PM

Quote:

Originally Posted by Medi0cr3

how much rwhp would you expect on the 35's with 8psi? Supporting mods: camshaft, ported heads

Read the first paragraph of the first post.

Not sure which of the 3 turbo's he used but i'm sure the numbers should be fairly close to that.

stevieturbo · 08-17-2013, 03:06 PM

Bump because it's cool...

And a query. Using say the bottom of the flywheel or bellhousing as a reference, just how much lower do the turbos sit than this ?

I'm looking for TT options for a non Camaro, but I need a low mount setup like that. Would be much handier to buy pre-made stuff though if I thought it would fit.

Andymon · 08-17-2013, 09:46 PM

Quote:

Originally Posted by stevieturbo

Bump because it's cool...

And a query. Using say the bottom of the flywheel or bellhousing as a reference, just how much lower do the turbos sit than this ?

I'm looking for TT options for a non Camaro, but I need a low mount setup like that. Would be much handier to buy pre-made stuff though if I thought it would fit.

I have the entry level kit and the skid plate covering the turbos comes down about 2 inches below the frame.

stevieturbo · 08-18-2013, 02:54 AM

Quote:

Originally Posted by Andymon

I have the entry level kit and the skid plate covering the turbos comes down about 2 inches below the frame.

Thanks, although that gives me no reference as I do not have that vehicle.

I'd need something like the flywheel/bellhousing/manual trans, which would be a common reference point on any vehicle.

Andymon · 08-18-2013, 09:55 AM

I could be wrong but maybe 4 inches.

BLACK10 · 08-18-2013, 08:07 PM

I may have missed it, but will this kit work with a th400 trans?

Blue_Shark · 02-09-2014, 08:29 PM

Any need updates with this kit???

03-13-2013, 05:42 AM	#297
Medi0cr3 Untamed Performance EPT Drives: 2011 2SS Join Date: Aug 2012 Location: El Paso Posts: 372	how much rwhp would you expect on the 35's with 8psi? Supporting mods: camshaft, ported heads __________________ Night Fury Cam Borla LT Headers and Borla Cat Back ATAK 9in. diff with 4.11's, DSS Axles, and Alum Shaft Hurst Short-Shifter; Ideal Garage Master Cylinder H-E Street Slayer Twin Billet Clutch BMR: Adjustable; Trailing Arms, Toe Rods, Extreme Sway Bar. BMR Subframe Bushings. Strange Rear Coilovers and mounts Tuned by Rhino79

02-09-2014, 08:29 PM	#305
Blue_Shark Drives: IBM L99 1SS/RS A6 Join Date: May 2010 Location: Soledad CA Posts: 88	Any need updates with this kit??? __________________ AMERICAN REVOLUTION RACING *BLUE_SHARK*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	3652	08-17-2023 02:50 PM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
2010 LS3 stock short block $2,500?	nuptualnemesis	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	4	06-25-2011 11:24 PM
What's the top end on a stock LS3 2010 Camaro	BoomBoomKid	USA - California	34	06-25-2010 04:18 PM
LS3 Tune Only Results .. Also stock LS3 vs. L99 dyno graph	LPFSTheFett	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	08-05-2009 07:04 AM

08-17-2013, 03:06 PM	#300
stevieturbo Drives: it changes Join Date: Nov 2010 Location: Norn Iron Posts: 1,126	Bump because it's cool... And a query. Using say the bottom of the flywheel or bellhousing as a reference, just how much lower do the turbos sit than this ? I'm looking for TT options for a non Camaro, but I need a low mount setup like that. Would be much handier to buy pre-made stuff though if I thought it would fit.

08-18-2013, 09:55 AM	#303
Andymon Drives: TwinTurbo 2012 IOM Camaro 2SS Join Date: Apr 2012 Location: OH Posts: 140	I could be wrong but maybe 4 inches.

08-18-2013, 08:07 PM	#304
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	I may have missed it, but will this kit work with a th400 trans?